Antminer AMS7473 - Default frequency: 600M Hash rate: 4. 73 th/s ±5%. Power supply not included, APW3++ recommended. Operating temperature: 0° C to 40° C 9. Power Efficiency: 025 j/gh at the wall, 93% efficiency, with APW3, 25°C ambient temp 4. Cooling: 2x 12038 fan 8. Dimensions: 301mml*123mmW*155mmH 7. Power efficiency: 0

25 w/gh ±10%. Network connection: Ethernet 10 Built-in web interface for easy setup and configuration. Hash rate: 4. 73 th/s ±5% 2. Power consumption: 1293W ±10%. Chip quantity per unit: 162x BM1385 6. Rated voltage: 12. 0v+5%, should not be less than 12. 0v 5. Power consumption: 1210 w at the wall, 93% efficiency, with APW3, 25C ambient temp 3.

More information about Antminer AMS7473

Antminer Power Supply APW3++ for S9 or L3+ or D3 w/ 10 Connectors


Bitmain Technologies APW3++ - Maximum output: 1200w @ 110v-120v, 1600W @ 220v-240v. Designed for the antMiner L3+/S9/T9/D3. Fan will turn on and off as needed by the unit; this is normal. Includes ten 6-pin PCIe connectors. Power cord not included, requires standard PC power cable C13.

More information about Bitmain Technologies APW3++


Similar products



Bitmain Antminer S9 Bitcoin Miner, 0.098 J/GH Power Efficiency, 13.5TH/s


Bitmain Antminer S9 - Power Efficiency: 0098 w/gh ±7% 4. Evga supernova 1600 g2 recommended if you only have 110-120v power. This does not mean there are loose parts and does not mean the item is defective. Bitmain recommends the APW3++ for those with 220v power. Cooling: 2x 12038 fans 7. Includes ten 6-pin PCIe connectors. Power supply unit is not included.

Maximum output: 1200w @ 110v-120v, 1600W @ 220v-240v. 6. Do not connect more than one PSU to the same hashing board! 3. The restocking fees are typically waived in the event that there is a provable failure that prevents the AntMiner from being within 5% of advertised speeds within the first 30 days. The antminer s9 requires TEN 6-pin PCI-e connectors.

Bitmain Antminer S9 Bitcoin Miner, 0.098 J/GH Power Efficiency, 13.5TH/s - Built-in web management portal - No separate host computer or software required. In the event that you experience a failure, please reach out to the seller immediately so that we can begin troubleshooting with you and/or processing a replacement. If you have 110v-120v power standard power outlets in the us, then the following power supplies have been confirmed to work well: -Bitmain's APW5 -Two Bitmain APW3++ -EVGA's SuperNova 1600 G2 Specifications: 1.

All ten 6-pin pci-e power connectors are required. Very loud! sounds like a whiny vacuum.

More information about Bitmain Antminer S9


Similar products



AntMiner V9~4TH/s @ 0.253W/GH Bitcoin/Bitcoin Cash ASIC Miner V9


Bitmain V9 - Most power efficient bitcoin Miner: 0098 j/gh ±7%. Power Efficiency: 0253 w/gh ±7% at the wall, 93% efficiency, with Bitmain PSU, 25°C ambient temp4.3. Power consumption: 1027w ±10% at the wall, 93% efficiency, with Bitmain PSU, 25C ambient temp3. Antminer V9 Specifications:1. Power supply unit is not included.

Built-in web management portal - No separate host computer or software required. Asic chip: bm15806. The restocking fees are typically waived in the event that there is a provable failure within the first 30 days and the warranty has not been voided by overclocking. Due to the nature of these products, there are higher than normal restocking fees typically 40%.

AntMiner V9~4TH/s @ 0.253W/GH Bitcoin/Bitcoin Cash ASIC Miner V9 - Power supply sold separately - antminer apw3++ power supply recommended if you have 220v+. Evga supernova 1600 g2 recommended if you only have 110-120v power. Bitcoin mining hash Rate: 4. 0th/s ±5%. Hash rate: 4. 0 th/s ±5%2. Bitcoin mining hash rate: 13.

More information about Bitmain V9


Similar products



Fan for AntMiner D3/L3+/S9/T9/S7/S5+/S5


Bitmain 2X-EMKR-YVFQ - Built-in web management Portal - No separate Host Computer or Software Required. Extremely reliable - Designed for 24/7 Constant Use. Power consumption: 1027W ±10% power supply is not included. Most power efficient bitcoin Miner: 0098 j/gh ±7%. Includes ten 6-pin PCIe connectors. Power cord not included, requires standard PC power cable C13.

Evga supernova 1600 g2 recommended if you only have 110-120v power. Bitcoin mining hash Rate: 4. 0th/s ±5%. Built-in web management portal - No separate host computer or software required. Maximum output: 1200w @ 110v-120v, 1600W @ 220v-240v. Dc12v 2a designed for the antMiner L3+/S9/T9/D3. Replacement fan for antMiner S3, S5, S5+, S7.

Fan for AntMiner D3/L3+/S9/T9/S7/S5+/S5 - 24cm cable with 4-pin plug. Power consumption: DC12V 2A. Dimensions: 120*120*38mm. Does not include scews. Power supply sold separately - AntMiner APW3++ or APW7 Power Supply Recommended. Power consumption: 1323W ±10% Power supply not included.

More information about Bitmain 2X-EMKR-YVFQ


Similar products



Tripp Lite Heavy Duty Computer Power Cord, 15A, 14AWG NEMA 5-15P to IEC-320-C13, 3-ft. P007-003


TRIPP LITE P007-003 - Use tripp lite's p007-003 in server applications that require a higher rated, heavier gauge cable. Built-in web management Portal - No separate Host Computer or Software Required. Power supply sold separately - antminer apw3++ power supply recommended if you have 220v+. Includes ten 6-pin PCIe connectors. Designed for the antMiner L3+/S9/T9/D3.

This power cord is the ideal solution for powering a PC or peripheral device in applications that require higher-rated, heavier-gauge cabling. High-quality connectors: c13 to 5-15p connectors, 3 x 14 AWG conductors, 15A / 125V rating. 3-ft. Power supply sold separately - AntMiner APW3++ or APW7 Power Supply Recommended.

Tripp Lite Heavy Duty Computer Power Cord, 15A, 14AWG NEMA 5-15P to IEC-320-C13, 3-ft. P007-003 - Maximum output: 1200w @ 110v-120v, 1600W @ 220v-240v. Extremely reliable - Designed for 24/7 Constant Use. Power consumption: 1027W ±10% power supply is not included. Evga supernova 1600 g2 recommended if you only have 110-120v power. Bitcoin mining hash Rate: 4. 0th/s ±5%. Built-in web management portal - No separate host computer or software required.

More information about TRIPP LITE P007-003


Similar products



Switching Power Supply for Bitmain AntMiner L3+ S9 T9 Model Number: APW3++-12-1600-A3, Wide Voltage Design, 1200W / 1600W, 10 of 6-pin PCIe Connectors


Bitmain NA - Also, manufactured in compliance with strict RoHS specifications. Lifetime warranty: Desktop PC power cable is backed by a lifetime limited warranty. Power supply sold separately - antminer apw3++ power supply recommended if you have 220v+. Power cable: features a c13 receptacle on one end and a standard 5-15P connector on the other end.

Extremely reliable - Designed for 24/7 Constant Use. Power consumption: 1027W ±10% power supply is not included. Designed for the antMiner L3+/S9/T9/D3. Includes ten 6-pin PCIe connectors. Power cord not included, requires standard PC power cable C13. Bitcoin mining hash rate: 13. 5th/s ±5%. Most power efficient bitcoin Miner: 0

Switching Power Supply for Bitmain AntMiner L3+ S9 T9 Model Number: APW3++-12-1600-A3, Wide Voltage Design, 1200W / 1600W, 10 of 6-pin PCIe Connectors - 098 j/gh ±7%. Built-in web management Portal - No separate Host Computer or Software Required. This allows you to extend the length of a PC or peripheral power cord by 3 feet and convert a C14 device into a standard 5-15P. Reliable design: rohs compliant and is UL listed. Power cable not included. Maximum output: 1200w @ 110v-120v, 1600W @ 220v-240v.

More information about Bitmain NA


Similar products



EVGA SuperNOVA 1600 G2, 80+ GOLD 1600W, Fully Modular, 10 Year Warranty, Includes FREE Power On Self Tester Power Supply 120-G2-1600-X1


EVGA 120-G2-1600-X1 - Extremely reliable - Designed for 24/7 Constant Use. Power consumption: 1027W ±10% power supply is not included. This power cord is the ideal solution for powering a PC or peripheral device in applications that require higher-rated, heavier-gauge cabling. High-quality connectors: c13 to 5-15p connectors, 3 x 14 AWG conductors, 15A / 125V rating.

3-ft. Also, manufactured in compliance with strict RoHS specifications. Lifetime warranty: Desktop PC power cable is backed by a lifetime limited warranty. Evga 1600 g2 - "Unrivaled Performance". This allows you to extend the length of a PC or peripheral power cord by 3 feet and convert a C14 device into a standard 5-15P.

EVGA SuperNOVA 1600 G2, 80+ GOLD 1600W, Fully Modular, 10 Year Warranty, Includes FREE Power On Self Tester Power Supply 120-G2-1600-X1 - Reliable design: rohs compliant and is UL listed. Built-in web management portal - No separate host computer or software required. Built-in web management Portal - No separate Host Computer or Software Required. Replacement fan for antMiner S3, S5, S5+, S7.24cm cable with 4-pin plug. Power consumption: DC12V 2A.

Dimensions: 120*120*38mm.

More information about EVGA 120-G2-1600-X1


Similar products



Tripp Lite Heavy Duty Computer Power Cord, 15A, 14AWG NEMA 5-15P to IEC-320-C13, 10-ft. P007-010


TRIPP LITE P007-010 - Built-in web management portal - No separate host computer or software required. 10-ft. This allows you to extend the length of a PC or peripheral power cord by 3 feet and convert a C14 device into a standard 5-15P. Reliable design: rohs compliant and is UL listed. Also, manufactured in compliance with strict RoHS specifications.

Power cord not included, requires standard PC power cable C13. Extremely reliable - Designed for 24/7 Constant Use. Power consumption: 1027W ±10% power supply is not included. High-quality connectors: c13 to 5-15p connectors, 3 x 14 AWG conductors, 15A / 125V rating. Heavy duty - 14awg: plug computers and peripherals into a standard outlet.

Tripp Lite Heavy Duty Computer Power Cord, 15A, 14AWG NEMA 5-15P to IEC-320-C13, 10-ft. P007-010 - Evga supernova 1600 g2 recommended if you only have 110-120v power. Bitcoin mining hash Rate: 4. 0th/s ±5%. This power cord is the ideal solution for powering a PC or peripheral device in applications that require higher-rated, heavier-gauge cabling. Most power efficient bitcoin Miner: 0098 j/gh ±7%. Also, manufactured in compliance with strict RoHS specifications.

More information about TRIPP LITE P007-010


Similar products



AntRouter R1-LTC ~1.29MH/s ASIC Litecoin Miner with Built-in WiFi Router AntRouter R1-LTC @ 1.29MH/s


Bitmain AntRouter R1-LTC - This power cord is the ideal solution for powering a PC or peripheral device in applications that require higher-rated, heavier-gauge cabling. Can be used to mine any Scrypt-based coin on any pool. 80 plus gold certified, with 90% 115vac / 92% 220VAC~240VAC efficiency or higher under typical loads. Includes ten 6-pin PCIe connectors.

Also, manufactured in compliance with strict RoHS specifications. Bitcoin mining hash rate: 13. 5th/s ±5%. Extremely reliable - Designed for 24/7 Constant Use. Power consumption: 1027W ±10% power supply is not included. Lifetime warranty: Desktop PC power cable is backed by a lifetime limited warranty. Reliable design: rohs compliant and is UL listed.

AntRouter R1-LTC ~1.29MH/s ASIC Litecoin Miner with Built-in WiFi Router AntRouter R1-LTC @ 1.29MH/s - Fan size / bearing: 140mm Double Ball Bearing. Heavy-duty protections, uvp, OPP, ocp, including OVP, and SCP.10 year Warranty. Built-in web management - Separate host computer NOT required for mining. Built-in power supply Plugs directly into a power outlet. This allows you to extend the length of a PC or peripheral power cord by 10 feet and convert a C14 device into a standard 5-15P.

More information about Bitmain AntRouter R1-LTC


Similar products



AntMiner Power Supply APW3++ [email protected] [email protected] w/ 10 Connectors


Bitmain - Power cord not included, requires standard PC power cable C13. Designed for the antMiner L3+/S9/T9/D3. 80 plus gold certified, with 90% 115vac / 92% 220VAC~240VAC efficiency or higher under typical loads. Power supply sold separately - AntMiner APW3++ or APW7 Power Supply Recommended. Reliable design: rohs compliant and is UL listed.

10-ft. Replacement fan for antMiner S3, S5+, S5, S7.24cm cable with 4-pin plug. Power consumption: DC12V 2A. Dimensions: 120*120*38mm. Does not include scews. Heavy duty - 14awg: plug computers and peripherals into a standard outlet. This allows you to extend the length of a PC or peripheral power cord by 10 feet and convert a C14 device into a standard 5-15P.

AntMiner Power Supply APW3++ [email protected] [email protected] w/ 10 Connectors - Built-in web management - Separate host computer NOT required for mining. Heavy duty - 14awg: plug computers and peripherals into a standard outlet. Power cable: features a c13 receptacle on one end and a standard 5-15P connector on the other end. To obtain the rated power of 1600w, the APW3++ must be connected to a 220-240V mains power supply.

Built-in web management Portal - No separate Host Computer or Software Required. This power cord is the ideal solution for powering a PC or peripheral device in applications that require higher-rated, heavier-gauge cabling.

More information about Bitmain


Similar products