#ad
#ad
Lisle 41250 #ad - For easy removal of plastic Push Pin Type Panel Fasteners with Center Pins. Pointed pliers tips will not damage the pin or anchor. The tool is only 7-1/2" long to fit in tight spaces.

More information about Lisle 41250 #ad

Lisle 42430 Push Pin Plier 80 Degree

#ad
#ad
Lisle 42430 #ad - Lisle 42430 Push Pin Plier 80 Degree #ad - Designed to prevent damage to the pin or anchor. Handles have a double dip grip. Easily removes plastic push pin type panel fasteners with center pins in tight spaces such as wheel wells. For easy removal of plastic push pin type panel fasteners with center pins in tight spaces such as wheel wells.

More information about Lisle 42430 #ad


Similar products



Lisle 22100 Flywheel Locking Tool for 6.6L Duramax

#ad
#ad
Lisle 22100 #ad - Designed to prevent damage to the pin or anchor. Package dimension is 4. 5 inches width by 5 inches height by 2 inches depth. Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement. Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation.

Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel. On 4500 and 5500 trucks, remove the rubber inspection cap on the bottom of the transmission. On 2500 and 3500 pickups, remove metal spring-loaded inspection plate on the bottom of the transmission. Locks flywheel in place when removing harmonic balancer on 6.

Lisle 22100 Flywheel Locking Tool for 6.6L Duramax #ad - 6l duramax engines with Allison automatic transmissions. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place. Package dimension is 4. 5 inches width by 5 inches height by 2 inches depth. Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.

Locks flywheel in place when removing harmonic balancer on 6. 6l duramax engines with Allison automatic transmissions.

More information about Lisle 22100 #ad


Similar products



Lisle 35260 Plastic Fastener Remover

#ad
#ad
Lisle 35260 #ad - Easily removes plastic push pin type panel fasteners with center pins in tight spaces such as wheel wells. Removes plastic Hold-Down Fasteners. Locks flywheel in place when removing harmonic balancer on 6. 6l duramax engines with Allison automatic transmissions. Handles have a double dip grip. Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation.

This tool quickly removes various types of plastic fasteners that hold on weather stripping, fender linings, radiator shrouds, air dams and other plastic or rubber parts. The tool is equipped with a sliding urethane button for use when extra leverage is necessary. Designed to prevent damage to the pin or anchor.

Lisle 35260 Plastic Fastener Remover #ad - Package dimension is 4. 5 inches width by 5 inches height by 2 inches depth. Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement. Removes plastic Hold-Down Fasteners. This tool quickly removes various types of plastic fasteners that hold on weather stripping, fender linings, radiator shrouds, air dams and other plastic or rubber parts.

The tool is equipped with a sliding urethane button for use when extra leverage is necessary.

More information about Lisle 35260 #ad


Similar products



Lisle 47900 Hose Remover Pliers

#ad
#ad
Lisle 47900 #ad - Handles have a double dip grip. Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation. This sharpened jaw actually "digs" into the tube to grip it squeeze and the hose is easily pushed off by the silver jaw. Easily removes plastic push pin type panel fasteners with center pins in tight spaces such as wheel wells.

For easy removal of 5/32" to 1/2" vacuum and fuel hoses engage the tube line with the black jaw. Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement. Designed to prevent damage to the pin or anchor. Locks flywheel in place when removing harmonic balancer on 6.

Lisle 47900 Hose Remover Pliers #ad - 6l duramax engines with Allison automatic transmissions. Package dimension is 4. 5 inches width by 5 inches height by 2 inches depth. Engage the tube line with the black jaw. This sharpened jaw actually "digs" into the tube to grip it squeeze and the hose is easily pushed off by the silver jaw. For easy removal of 5/32" to 1/2" vacuum and fuel hoses.

Removes plastic Hold-Down Fasteners.

More information about Lisle 47900 #ad


Similar products



ACDelco 252-838 Professional Water Pump Kit

#ad
#ad
ACDelco 252-838 #ad - The gaskets, and o-rings packaged with this Professional, seals, premium aftermarket water pump help guarantee that all necessary parts are available for trouble-free installation. Engage the tube line with the black jaw. This sharpened jaw actually "digs" into the tube to grip it squeeze and the hose is easily pushed off by the silver jaw.

All makes water pumps fit GM vehicles as well as a wide range of non-GM vehicles. Locks flywheel in place when removing harmonic balancer on 6. 6l duramax engines with Allison automatic transmissions. Designed to prevent damage to the pin or anchor. Thoroughly tested for reliable, leak-free performance. Handles have a double dip grip.

ACDelco 252-838 Professional Water Pump Kit #ad - An acdelco professional, premium aftermarket Engine Water Pump circulates coolant through your vehicle’s radiator and engine system to help maintain proper engine temperature and performance. Easily removes plastic push pin type panel fasteners with center pins in tight spaces such as wheel wells. This premium aftermarket replacement engine water pump is manufactured to meet your expectations for fit, form, and function.

Coated seals support seal longevity and durability. Heat-treated shaft assemblies provide superior strength and durability over non-treated assemblies. Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation.

More information about ACDelco 252-838 #ad


Similar products



Lisle 42420 Push Pin Plier 30 Degree

#ad
#ad
Lisle 42420 #ad - Easily removes plastic push pin type panel fasteners with center pins in tight spaces such as wheel wells. Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement. Easily removes plastic push pin type panel fasteners with center pins in tight spaces such as wheel wells.

For easy removal of 5/32" to 1/2" vacuum and fuel hoses. Removes plastic Hold-Down Fasteners. This tool quickly removes various types of plastic fasteners that hold on weather stripping, radiator shrouds, fender linings, air dams and other plastic or rubber parts. The tool is equipped with a sliding urethane button for use when extra leverage is necessary.

Lisle 42420 Push Pin Plier 30 Degree #ad - Package dimension is 4. 5 inches width by 5 inches height by 2 inches depth. Heat-treated shaft assemblies provide superior strength and durability over non-treated assemblies. Designed to prevent damage to the pin or anchor. High-quality bearings are permanently sealed and lubricated for greater durability and long life.

For easy removal of plastic push pin type panel fasteners with center pins in tight spaces such as wheel wells. Locks flywheel in place when removing harmonic balancer on 6. 6l duramax engines with Allison automatic transmissions.

More information about Lisle 42420 #ad


Similar products



Lisle 46950 Relay Puller Pliers

#ad
#ad
Lisle 46950 #ad - Easily removes plastic push pin type panel fasteners with center pins in tight spaces such as wheel wells. Offset handle and thin tips allow access to relays in confined areas. Engage the tube line with the black jaw. This sharpened jaw actually "digs" into the tube to grip it squeeze and the hose is easily pushed off by the silver jaw.

All makes water pumps fit GM vehicles as well as a wide range of non-GM vehicles. Pliers for removing electrical relays on most domestic and import vehicles. Specially designed tips are angled to fit slots or edge of relay cover. Handles have a double dip grip. Designed to prevent damage to the pin or anchor.

Lisle 46950 Relay Puller Pliers #ad - Also works on many heavy-duty and industrial applications. High-quality bearings are permanently sealed and lubricated for greater durability and long life. Thoroughly tested for reliable, leak-free performance. Offset handle and thin tips allow access to relays in confined areas. Removes plastic Hold-Down Fasteners.

This tool quickly removes various types of plastic fasteners that hold on weather stripping, fender linings, radiator shrouds, air dams and other plastic or rubber parts. The tool is equipped with a sliding urethane button for use when extra leverage is necessary.

More information about Lisle 46950 #ad


Similar products



100PCS - GOOACC Nylon Bumper Fastener Rivet Clips GM 21030249 Ford N807389S Automotive Furniture Assembly Expansion Screws Kit Auto Body Clips 8mm

#ad
#ad
GOOACC GRC-13 #ad - Package dimension is 5. 75 inches width by 105 inches height by 1 inches depth. Easy to fasten Bumper Fender Flare and Mud Flap. High-quality bearings are permanently sealed and lubricated for greater durability and long life. Easily removes plastic push pin type panel fasteners with center pins in tight spaces such as wheel wells.

Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement. This allows relay to pop free from socket with less chance of damaging the relay. Great material - these bumper clips are made of high-quality black nylon material, anti-wear and anti-corrosion, would not break or crack easily during use.

100PCS - GOOACC Nylon Bumper Fastener Rivet Clips GM 21030249 Ford N807389S Automotive Furniture Assembly Expansion Screws Kit Auto Body Clips 8mm #ad - One size fits most - head diameter: 20mm/ 08 inches; stem length: 22. 8mm/09 inches; fits Into: 8mm /03 inches hole. Pliers for removing electrical relays on most domestic and import vehicles. Coated seals support seal longevity and durability. Removes plastic Hold-Down Fasteners. This tool quickly removes various types of plastic fasteners that hold on weather stripping, fender linings, radiator shrouds, air dams and other plastic or rubber parts.

More information about GOOACC GRC-13 #ad


Similar products



Lisle 37160 Disconnect Pliers, 1 Pack

#ad
#ad
Lisle 37160 #ad - Designed to prevent damage to the pin or anchor. Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation. Offset handle and thin tips allow access to relays in confined areas. Low-profile design with 85 degree bend allows the tool to fit between the top of the fuel tank and vehicle.

Works great on Delphi two Tab connectors and some import vehicles. Can also be used on some electrical connectors. Disconnects fuel line and EVAP line fittings with tabs that must be depressed to disengage. This allows relay to pop free from socket with less chance of damaging the relay. Handles have a double dip grip.

Lisle 37160 Disconnect Pliers, 1 Pack #ad - Easily removes plastic push pin type panel fasteners with center pins in tight spaces such as wheel wells. Spring action makes tool easier to use. Thoroughly tested for reliable, leak-free performance. Easily removes plastic push pin type panel fasteners with center pins in tight spaces such as wheel wells.

Pliers for removing electrical relays on most domestic and import vehicles. Removes plastic Hold-Down Fasteners. This tool quickly removes various types of plastic fasteners that hold on weather stripping, fender linings, radiator shrouds, air dams and other plastic or rubber parts.

More information about Lisle 37160 #ad


Similar products



Lisle 22110 Flywheel Lock

#ad
#ad
Lisle 22110 #ad - Locks flywheel in place when removing harmonic balancer on 6. 6l duramax engines with Allison automatic transmissions. Easy to fasten Bumper Fender Flare and Mud Flap. Light truck Flywheel Stop. For more information check the main Lisle tool- 22100 Offset handle and thin tips allow access to relays in confined areas.

Replacement part for Lisle tool- 22100 Package dimension is 4. 5 inches width by 5 inches height by 2 inches depth. Designed to prevent damage to the pin or anchor. On 2500 and 3500 pickups, remove metal spring-loaded inspection plate on the bottom of the transmission. Also works on many heavy-duty and industrial applications.

Lisle 22110 Flywheel Lock #ad - High-quality bearings are permanently sealed and lubricated for greater durability and long life. For easy removal of 5/32" to 1/2" vacuum and fuel hoses. Package dimension is 5. 75 inches width by 105 inches height by 1 inches depth. The tool is only 7-1/2" long to fit in tight spaces. These universal push-type fastener clips will fit on most of auto parts with 8mm hole, hold your parts very tightly.

More information about Lisle 22110 #ad


Similar products