As an Amazon Associate I earn from qualifying purchases.
1. Delphi Connection Systems #ad
Delphi Metri-Pack 280 Series 2-Way Connector w/10-12 AWG Sealed Waterproof Set #adDelphi Connection Systems #ad
- Metri-pack 280 series sealed System - 2 Conductor up to 30 Amps. All delphi product connector have a mark on connectors when manufacture such as “Delphi” or “PED” PED is stand for: Packard Electric Device.
Professional installation recommended. Gauge wire: 10 12 AWG. The temperature range from -40°C to 125°C,.
2. Delphi Connection Systems #ad
Delphi Metri-Pack 280 Series 2-Way Connector w/10-12 AWG Sealed Waterproof 3 Set #adDelphi Connection Systems #ad
- Professional installation recommended. Metri-pack 280 series sealed System - 2 Conductor up to 30 Amps. Gauge wire: 10 12 AWG.
The temperature range from -40°C to 125°C,. All delphi product connector have a mark on connectors when manufacture such as “Delphi” or “PED” PED is stand for: Packard Electric Device.
3. Aptiv (formerly Delphi) #ad
Aptiv/Delphi Metri-Pack 43amp 2-Pin Seal 480 Series 2-Conductor Connector w/10-12 AWG #adAptiv (formerly Delphi) #ad
- Low energy, low voltage capability. The temperature range from -40°C to 125°C,. Excellent resistance to temperature, chemicals and abrasion. 43 amps continuous maximum current rating. Gauge wire: 10 12 AWG.
4. MUYI #ad
MUYI 6-10,12 AWG Battery Quick Connect/Disconnect Wire Harness Plug Connector 50A 12-36V DC 50A 6-10/12AWG 2 Pack, Red Battery Quick Connect #adMUYI #ad
- Made of sturdy polycarbonate with fitted rubber boot covers; allows for quick power connection /disconnection from winches, tourism bus, trailers, electric forklift and other electrical devices.
Connector dimension（lxwxh）: 1. 89" x 1. 38" x 063" ; connected set dimension（LxWxH）: 3. 22" x 1. 38" x 063". Easy to install. Fits 6-10/12 gauge wire; capacity: 50a, max current: 60A; Voltage: 12~36V, withstanding max voltage: 600V.
Package include: 2x polycarbonate cover, 2x Hard rubber boot caps, 4x terminal pins. Insert the wires into the terminal pins, then solder or crimp them. Connector ends are identical, so either end is suitable for connection to the power or load side.
5. Aptiv (formerly Delphi) #ad
2 Pin Metri-Pack Waterproof Connector 10-12awg Terminals and Seals 46Amp 10-12 GA 1set #adAptiv (formerly Delphi) #ad
- All product connector have a mark on connectors when manufacture such as “Delphi” or “PED” PED is stand for: Packard Electric Device.
Professional installation recommended. 40ºc to 125ºc temperature range. Metri-pack 630 series sealed System - 2 Pin up to 46 Amps. Gauge wire: 10 12 AWG.
6. iGreely #ad
IGreely SAE Extension Cable 12AWG SAE Power Automotive Extension Cable SAE to SAE Quick Disconnect Wire Harness SAE Connector for Solar Panel Motorcycle Cars Tractor 12 AWG 10Ft #adiGreely #ad
- 2 pin cable with sae connector, kayak, lawnmower, rv, atv, extension cord with Universal SAE connect, tractor sprayer, can be widely used in all kinds of vehicles, ATV, trolling motor, like motorcycle, power inverter and other devices with sae ports.
Come with waterproof dust cap for protecting standard SAE type connector from rain and dust, which stay clean and dry inside when you don't use. Thick, flexible and durable.
The sae cable is made of 12awg pure copper wire; Cable length:1m/3. 3ft. The sae extension cable is suitable for solar battery connection and transfer, and automotive batteries transfer etc. Package including: 10ft/3m sae connector x 1, just contact us if you have any issues about the quliaty or other questions, 2 years long time warranty, we will take the issue for you via replacement or refund.
7. iGreely #ad
IGreely 10 Feet 12 AWG Solar Extension Cable with Solar Panel Female and Male Connector Solar Panel Adapter 12 Gauge 10FT Red + 10FT Black #adiGreely #ad
- The wiring is weatherproof and designed to withstand extreme heat and cold. Made with copper. One pair 1 piece black + 1 piece red 10ft 12AWG solar extension cable.
Stable self-locking system which is easy to lock and open. Two cables with solar panel connecters at one end connecting to solar panel and bare on the other end connecting to solar charge controller.
8. Glarks #ad
Glarks 100pcs 12-10 Gauge M8 Ring Electrical Insulated Quick Splice Crimp Terminals Connectors #adGlarks #ad
- Package quantity: 100pcs. Wire diameter = m8, wire range: 4-6mm2, a. W. G: 12-10, max current=45A. 100% brand new high quality insulated crimp terminals connectors.
Selection of - quality copper and PVC materials processing, Comply with UL and RoHS standards. Package includes: Ring quick splice wire crimp terminals connectors.
9. Yeebline #ad
Yeebline 10 AWG SAE Cable Connector, 60cm SAE to SAE 2 Pin Quick Disconnect with Cap Power Automotive Panel Extension Cable for Solar Panels SAE-SAE, SAE Socket Chassis Wire #adYeebline #ad
- Heavy duty, thickness, flexible and durable. Sae connector with dust cap - protects the SAE interface from dust and raindrops when not in use. Specifications: the cable is made of heavy duty 10awg wire.
The sae extension cable is suitable for connection and transfer of solar battery and car battery, convenient to use and install. Total length: 60cmincluding two ends, cable Length: 50cmNot including two ends; Color: Red/Black; Fast and easy to connect and disconnect.
Note: please check the specifications and polarity before installation. Applications: wide rang of application in solar panel connection, lawn motor, motorcycle, LED pole connection, bicycle, radio, electric toy tractor, car, yacht, truck, RV, other electrical connection engineering etc.
10. Ruikarhop #ad
DT Series Connector 12 Pin（16 AWG-22 AWG）Sealed Male and Female Auto Waterproof Electrical Wire Connector Plug #adRuikarhop #ad
- Suitable for use in automotive applications: Motorcycle, John Deer, Harley, Caterpillar, Nascar Racing cars etc. Includes 2 sets 12 pin genuine Deutsch Electrical Components - amazing per piece value.
Wire size:16, 20, 18, 22 wire gauge: 16-22 AWG. High quality material：Resistant to dust, dirt, moisture, vibration, salt spray, contamination. Easy to install: buckle design ensures accurate and complete insertion of the contact in the housing and prevents it from slipping out of the connector.