As an Amazon Associate I earn from qualifying purchases.
1. Camco #ad
1/4" Male NPT x 1/4" Female Inverted Flare, Camco 59953 Propane Fitting #adCamco #ad
- Sold brass construction. 1/4" male npt x 1/4" female Inverted Flare. Connect a 1/4" inverted flare pigtail to a regulator with 1/4" female NPT ports. Easy to install. For use with some regulators.
2. Camco #ad
Camco 59843 20" Pigtail Propane Hose Connectors, Acme x 1/4" Male NPT #adCamco #ad
- 20" hose. Built-in excess flow and thermal protection. Rated for 200, 000 BTUs per hour. Acme nut x 1/4" male NPT. Connect your camper's 1/4" npT inlet regulator to a 20lb or 30lb LP tank.
3. Frienda #ad
6 Pieces 1/4 Inch Male NPT x 1/4 Inch Female Inverted Flare Propane Fitting NPT Reducer Brass Female NPT Pipe Adapter Brass Bushing Reducer Brass Threaded Pipe Connector for Fuel, Oil Convert #adFrienda #ad
- What you will receive: the package comes with 6 pieces of female threaded pipe adapters, the quantity is sufficient for you to use and replace in daily life, you can also prepare them as reserve tools. Wide application: the npt fitting reducer can be applied in liquid petroleum, oil, fuel, power steering, hydraulic brakes, transmission cooler lines, refrigeration, air, piping, natural gas, but please note that it is not suitable for drinking water pipe connections.
Suitable for service: the propane tube connector allows you to connect the 1/4 inch reverse flare propane tail to a regulator with 1/4 inch female NPT port; The check valve only allows propane to flow in one direction, which can be applied with some propane regulators.
Easy installation: the brass hose adapter is quipped with 1/4 inch external thread joints, which are designed for easy installation, if you worry about safety problem, the adapter can be reinforced with sticky tape for extra tightness. Quality material: the thread pipe extension is made of brass, not easy to deform or break, with low permeability, and it is rust-resistant and corrosion-resistant, the material is sturdy and hard, giving you a long-term service.
4. EVIL ENERGY #ad
EVIL ENERGY 6AN Male Flare to 1/4" NPT Pipe Fitting Adapter Aluminum Straight Black 2PCS #adEVIL ENERGY #ad
- Material: made of aluminum alloy 6061-T6, anodized black surface. Easy installation and removal with wrench. Notice: to ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended.
Application: widely used in fuel systems, power steering systems, cooling systems, etc. Size: an6 to 1/4" npt, the thread size of 6AN is 9/16-18 UNF. Sealing：the an side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread.
5. VIAIR #ad
Gold, Viair 92951 1/8" Male NPT to 1/4" Compression Fitting for 1/4" Air Line #adVIAIR #ad
- Pneumatic fitting used to connect an air line to your onboard air system. Teflon tape is not recommended. Npt fittings are thicker at the base and should not be overtightened.
1/8 inch male to 1/4 ID Air hose compression fitting. Fitting made from Brass. Use thread sealant for proper installation.
|Warranty||All VIAIR products come with a One Year Manufacturer Defect Warranty|
6. AFATEBOX #ad
6AN Flare to 1/4 NPT Male Fuel Hose Fitting Adapter JIC 9/16-18 AN6 Male to 1/4 inch Male NPT Thread Pipe Adaptors Black Aluminum Anodized #adAFATEBOX #ad
- Jic -6 an male flare to male 1/4" NPT nipple hose fitting hex head reusable adapter. Material: high performance light weight t6 6061 cnc machined billet aluminium.
Male -6 an flare to male 1/4" NPT thread oil fuel line connector straight. Black anodized finish for durability and strength. Precision machined to ensure accurate thread engagement.
7. Allstar #ad
Pack of 4, Allstar ALL50121 1/8" NPT Male to 1/4" Brass Straight Inverted Flare Female Brake Line Adapter Fitting #adAllstar #ad
- Sold in one set of 4 pieces. Adapts 1/8 npt male to 1/4 inverted flare female and is a straight style fitting. Brake line adapter fitting is made from quality brass.
If you don't see what you need, Allstar also carries a large and wide selection of quality fittings for most automotive plumbing needs.
|Manufacturer||Allstar Performance #ad|
8. Breezliy #ad
Breezliy 6AN Male Flare to 1/4" NPT Pipe Fitting Adapter Aluminum Straight Black 2PCS #adBreezliy #ad
- Buy with confident:for any quality problem, resend a new or unconditional full refund, Please Buy with Confident. Sealing:the an side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered threads.
To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Material: made of aluminum alloy 6061-T6, anodized black surface.
Good corrosion resistance. There is no pollution in disposal, which is beneficial to environmental protection. Size : an6 to 1/4 npt, the thread size of 6AN is 9/16-18UNF. Wildly application :1/4 npt to 6an fitting can be used with various engine oils, coolant, transmission oil, alcohol, E85, air, methanol, water, etc.
|Part Number||2PCS 6AN Male Flare 1/4" NPT|
9. EDGE INDUSTRIAL #ad
EDGE INDUSTRIAL Brass REDUCING HEX Bushing 3/4" Male NPT X 1/4" Female NPT Fuel / AIR/ Water / Oil/ Gas WOG Qty 01 #adEDGE INDUSTRIAL #ad
- Please note, 3/4" npt measures 1. 050", 1/4" npt measures 0540" outside thread diameter in linear inches. Not deemed lead free. 3/4" male npt x 1/4" female nPT Reducing Hex Bushing.
1000 psi working pressure, temperature range of -65°F to 250°F -53°C to 121°C. Not for potable water. Backed by edgE Industrial full manufacturers warranty.
10. MENSI #ad
MENSI 25FT Propane Torch Extension Hose With 1/4" NPT Ball Fittings Female Thread and 1/4" Male NPT Thread on End for DIY Torch, Grill, Heater #adMENSI #ad
- Attention: This is Ball Flare Fittings. 350 psi rated propane gas hoses with 25 Feet. 1/4-inch female flared b ball seat female Pipe Swivel Fitting industry standard fittings.
Csa listed hose 5/16” id with all Brass Fittings High pressure hose. Works with most other manufacturer’s torches and for Rv's hose extension use. 1/4-inch npt male Fitting on one end.