As an Amazon Associate I earn from qualifying purchases.

1. AUTOSAVER88

#ad

AUTOSAVER88 4 Inch Inlet Exhaust Tip, Bolt/Clamp-On Design, 4’’ x 8’’ x 15’’ Stainless Steel Diesel Exhaust Tailpipe Tip for Truck Cars

#ad
AUTOSAVER88 #ad - Protects your exhaust pipe from sunlight and rain to prevent rusting and deformation. Bolt-on design easily fastens to the exhaust pipe after tightening screws. ·. Standard 4’’ x 15’’ inlet and overall length respectively. Universally compatible with vehicles that have exhaust pipes with an outlet diameter of 4 inches. Note: please measure the outlet diameter of your exhaust pipe prior to purchasing. Autosaver88 4 inch to 8 inch exhaust tip is made from stainless steel and black paint coating to provide a sleek look to your car exhaust.
BrandAUTOSAVER88 #ad
ManufacturerAUTOSAVER88 #ad
Part NumberJ003
Model5841844473

2. LCGP

#ad

Bolt-On, Rolled End Angle Cut Tailpipe, 8" Outlet 15" Length Truck Tailtip, LCGP Diesel Exhaust Tip 4" Inlet, Black Powder Coated

#ad
LCGP #ad - High quality stainless steel infused with anti-corrosive agents that prevent your exhaust tip from rusting. 4" inlet & 8 outlet universal Diesel Truck Exhaust Tip. Easy slip on 4" tailpipe. Style: angled Cut - Rolled Edge. However, Welding Is Recommend. Surface finished: black powder Coated. Have a small hole on bottom of tip to drain water.
BrandLCGP #ad
ManufacturerLCGP #ad
Height8.3 Inches
Length15.5 Inches
Width8.3 Inches
Part Number408015RACBK

3. MOSTPLUS

#ad

MOSTPLUS Truck Diesel Exhaust Tip Black Stainless Steel Tailpipe Tip 4" Inlet; 8" Outlet; 15" Length

#ad
MOSTPLUS #ad - It will protect your original pipe from the sun and rain, avoid rusting and deformation. Installation - no weld and drill needed. Just fix the screw to the appropriate location of tailpipe by wrench. Fitment: inside diameter inlet-4 Inch, Outside diameter outlet-8 Inch, Overall length-15 Inch. Please check your car information before purchase. Material: high qualified stainless steel material, durable and anti-corrosive. Note : it will fit 4inch outside diameter pipe, but will not fit 4 inch inside diameter pipe.
BrandMOSTPLUS #ad
ManufacturerMOSTPLUS #ad
Part NumberM31006

4. Upower

#ad

Upower 4 inch Inlet 8 inch Outlet Exhaust Tip 304 Stainless Steel 4" to 8" Tail Pipe Tips 15" Long Bolt-On 45 Degree Angle Cut Universal for Car Truck

#ad
Upower #ad - Bolt on installation and Angled Cut-Rolled Edge design. Id: 4" od: 8" length: 15" Angled Roll Bolt. Fits: to ensure proper fit make sure your exhaust INLET diameter is 4 Inch. Materials: made of high quality Stainless steel has very strong anti-corrosive, Never Rusty. Pack of 1; professional installation is highly recommended; No instruction included.
BrandUpower #ad
ManufacturerPartsSquare #ad
Part Number165711

5. Richeer

#ad

4 x 8 x 15 Stainless Steel Exhaust Tailpipe Tip with Ball End L-Wrench…, 4 Inch Inlet Black Exhaust Tip

#ad
Richeer #ad - Installation: please remove the film before installation!!! the high temperature of the exhaust pipe may ignite the film. Bolt On Installation. Dimension: standard 4" inside diameter inlet, 8” outside diameter outlet, 15" overall length, universal for vehicles with 4 inch OUT DIAMETER exhaust pipes.

If you think it isn’t tight enough, additional welding will be a nice safeguard. Please measure the outside diameter of your exhaust pipe before ordering ! Thanks you. Any problem, please feel free to contact us. Perfect desigh: black powder coated finished and rolled Edge - 20 Degree Slant Cut; A small hole on bottom of tip design to drain water, not easy to accumulate water and prevent rust.

Compatibility: universal for 4" outside diameter exhaust tip ; NOT For 4" Inside Diameter Tailpipe. Features: exhaust tip uses film heat sealing packaging to ensure that the product surface will not be scratched during transportation. Durable high quality black powder Coated Stainless Steel With Strong Anti-corrosive to protect the existing tailpipe from corrosion and deformation.
BrandRicheer #ad
ManufacturerRicheer #ad
Part NumberAM13907

6. RP Remarkable Power

#ad

RP Remarkable Power, 4" Inlet 8" Outlet 18" Long Stainless Steel Rolled Edge Exhaust Tip Diesel EXT28

#ad
RP Remarkable Power #ad - Installation style: clamp on design, single layer, Angled Cut 20 degree, Rolled Edge. Note: if you think it isn’t tight enough, additional welding will be a nice safeguard.

Important note: installation instruction is not included, professional help in installation may be needed. Material: made by high quality stainless steel, light weight, heat-resisting, polish stainless surface, anti-corrosion and decorate appearance. Function: exhaust waste gas, Reduce Pressure and Noise, Filter the waste gas to reduce pollution. Size: 4 inch inlet, 18inch overall lehgth, 8 inch outlet, 100% Brand New Exhaust Tip.
BrandRP Remarkable Power #ad
ManufacturerMotorDexon #ad
Part NumberRP_EXT28_G1

7. RP Remarkable Power

#ad

18" Overall Length Long Stainless Steel Rolled Edge Universal Tialpipe, 20 degree Exhaust Tip Diesel for Truck EXT27, RP Remarkable Power, 4" Inlet 7" Outlet

#ad
RP Remarkable Power #ad - Installation style: clamp on design, Single Layer, angled cut 20 degree, Rolled Edge. Note: if you think it isn’t tight enough, additional welding will be a nice safeguard.

Function: exhaust waste gas, Reduce Pressure and Noise, Filter the waste gas to reduce pollution. Important note: installation instruction is not included, professional help in installation may be needed. Material: made by high quality stainless steel, heat-resisting, light weight, polish stainless surface, anti-corrosion and degant appearance. Size: 4 inch inlet, 7 inch outlet, 18 inch overall lehgth, 100% Brand New Exhaust Tip.
BrandRP Remarkable Power #ad
ManufacturerMotorDexon #ad
Part NumberRP_EXT27_G1

8. EOTH

#ad

Bolt On Design, 4 x 8 x 15 in Black Stainless Steel Exhaust Tip, 4 inlet to 8 outlet Exhaust TIP

#ad
EOTH #ad - Dimensioninlet diameter: 4"; Outlet Diameter: 8"; Overall Length: 15". Just fix the screw to the appropriate location of tailpipe by Wrench. Easy installationno weld and drill needed. Wide applicationUniversal fits 4" Inlet exhaust system. Materialdurable and anti-corrosive, protect the original tips from Sun and Rain, avoid rusting and deformation. Designbolt on - rolled edge - 20 Degree Single Angle Cut.
BrandEOTH #ad
ManufacturerEOTH #ad
Part NumberEO13907

9. Upower

#ad

Upower 4" to 7" Diesel Exhaust Tips 4" inlet 7" outlet 18" Long Universal Exhaust Tips Mirror Polish Stainless Steel Exhaust Tailpipe Rolled Edge Bolt On Diesel Tips

#ad
Upower #ad - Dimension4 inch inlet; 7 inch Outlet; 18 inch Overall Length. Wide applicationuniversal fits 4" Inlet diesel trucks pickup car exhaust tailpipe system. Just fix the screw to the appropriate location of tailpipe by Wrench. Durable and anti-corrosive, protect the original tips from Sun and Rain, avoid rusting and deformation. Easy installationno weld and drill needed. Designbolt on - rolled edge - 70 Degree Single Angle Cut. Materialhigh quality stainless steel mirror polished.
BrandUpower #ad
ManufacturerPartsSquare #ad
Height7.48 Inches
Length18.7 Inches
Width7.48 Inches
Part Number165725

10. RP Remarkable Power

#ad

4" Inlet 8" Outlet 15" Overall Length Long Stainless Steel Rolled Edge Diesel Exhaust Tip EXT29, RP Remarkable Power

#ad
RP Remarkable Power #ad - Installation style: clamp on design, single layer, Angled Cut 20 degree, Rolled Edge. Note: if you think it isn’t tight enough, additional welding will be a nice safeguard.

Function: exhaust waste gas, Reduce Pressure and Noise, Filter the waste gas to reduce pollution. Size: 4 inch inlet, 8 inch outlet, 15 inch overall lehgth, 100% Brand New Exhaust Tip. Material: made by high quality stainless steel, heat-resisting, light weight, polish stainless surface, anti-corrosion and decorate appearance. Important note: installation instruction is not included, professional help in installation may be needed.
BrandRP Remarkable Power #ad
ManufacturerMotorDexon #ad
Part NumberRP_EXT29_G1