Top 10 5/8 Fuel Line Hose – Automotive Replacement Fuel Hoses

As an Amazon Associate I earn from qualifying purchases.

1. EVIL ENERGY

#ad

EVIL ENERGY 5/8 Fuel Hose Line NBR Rubber 30R7 10FT 300PSI

#ad
EVIL ENERGY #ad - Applicable medium: 5/8 id fuel line can work with diesel/biodiesel/gasoline/Oil/grease/water and air, etc. Application: sae 30r7 rubber fuel line widely used in fuel system, PCV system, oil cooling, steam emission, please check the pressure of application before perchase. Burst pressure: 1160psi. Evil energy provide 10ft 5/8inch fuel hose 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message. Working pressure: 300psi. Temperature range: -40°F to 257°F. Minimum Bend Radius: 6. 3inch160mm. Id: 5/8inch 16mm, od: 094inch24mm. Material: NBR.
BrandEVIL ENERGY #ad
ManufacturerSpeedwow Tuning #ad
Part NumberEV01821BK
ModelEV01821BK

2. steber

#ad

Fuel Line 5/8" ID NBR Hose 10 AN Push on Hose 0.9 OD for Small Engines, Air, E85, 5 feet, E10, Oil, Methanol and Lubricant, Fuel Systems, Coolants

#ad
steber #ad - Push on / lock hose designed for conveying gasoline, diesel, buses, E-85, trucks, and bio-diesel fuels in cars, etc. Burst pressure 4mpa, handles temperature ranges of -40 to +275 degrees F. Id: 5/8 inch / 16mm, an10 nbr liner hose, od: 09 inch / 23mm, 5 feet. The fuel lines are oil resistant, cold-resistant and ethanol tolerance. Use hose barbs and clamps, transfer of petroleum products fuel lines for small engines. Working pressure 2mpa.
Brandsteber #ad
Manufacturersteber #ad
Part NumberBNBRID16-5

3. AC PERFORMANCE

#ad

E10, 5/8 ID, AN10, Lubricants and Coolant 2 feet, E85, AC PERFORMANCE Black -10 AN NBR Push on Hose Fuel Line Engine Liner Compatible with Fuel System, Ethanol, Oils

#ad
AC PERFORMANCE #ad - 10 an, length: 2 feet. Id size: 5/8", 15. 9mm; od size: 29/32", 22. 9mm. For use with fuel system, oils, e85, Ethanol, e10, Lubricants and Coolant System. Material: made by high-graded Nitrile Rubber NBR with Textile Reinforced, Covered by Elastomer. Operation temperature ranges from -40 c degree to 100 C degree. Works with push-on hose end fittings, suit 400 & 510 series hose ends. Working pressure rating 280 PSI, Burst Pressure is 800 PSI.
BrandAC PERFORMANCE #ad
ManufacturerAC PERFORMANCE #ad
Weight0.02 Pounds
Part Number0722-10-M2_BK
Model0722-10-M2_BK
Warranty1 year quality warranty

4. theBlueStone

#ad

TheBlueStone -4AN -6AN -8AN -10AN Braided Fuel Line Hose 10FT -10AN Nylon Braided for 5/8" Tube Size

#ad
theBlueStone #ad - Our rubber hose should compatible with rubber fitting adapter. Working temperature: -40°F to +300°F. Application for: racing fuel, diesel, pump gas, fuels with ethanol, alcohol based fuels, motor oil & coolant etc. Note: double check the hose size before bidding. Working pressure: 500 psi. The fitting adapter for PTFE hose is NOT FIT. Burst pressure: 2000 PSI. Inner diameter: 14. 27 mm 056 inch, outer Diameter: 2083 mm 082 inch.
BrandtheBlueStone #ad
ManufacturertheBlueStone #ad
Weight1.54 Pounds
Part NumberGCR422
ModelGCR422

5. Lkonwee

#ad

Lkonwee 5/8 Inch ID NBR Fuel Line Hose 10 Feet-10AN Push on Hose Work with Diesel/Biodiesel/Gasoline/Oil/Grease/Water and Air,etc,Black

#ad
Lkonwee #ad - Temperature range: -40°F to 257°F. Size- length:10 ft, id: 5/8inch 16mm, od: 094inch(24mm. Minimum Bend Radius: 6. 3inch160mm. Working pressure- 290psi. Tips- please check size and application pressure before purchase. Material-NBR. Application: fuel line can work with diesel/biodiesel/gasoline/Oil/grease/water and air, steam emission, etc. Widely used in fuel system, oil cooling, PCV system. Burst pressure: 1160psi.
BrandLkonwee #ad
ManufacturerLkonwee #ad

6. TCTAuto

#ad

TCTAuto 10AN 5/8" Hose 5Ft Universal Stainless Steel Braided CPE Oil Gas Fuel Hose Fuel Line

#ad
TCTAuto #ad - Working pressure: 1015 PSI. Burst pressure: 6090 PSI. Made of polyurethanecpe on the inside that gives them high chemical and heat resistance, extreme pressure resistance, along with a braided stainless steel outside which gives them high durability, and a professional and high-tech appearance.

Mostly worked with coolant, pump gas, oil, fuel, hydraulic fluid, pump, oil return, diesel, fuel return system, alcohol and air, turbo cooler system and transmission system. Package includes: 5Ft 10AN stainless steel braided fuel line. We offer 2 years warranty of all the products in our store, freely contact us if you have any questions. Not fit e85. Working temperature: -40 f to 248 f-40°c to +120°c under most operating conditions.
BrandTCTAuto #ad
ManufacturerTCTAuto #ad
Part NumberAN00021

7. Eunice

#ad

Fuel Line 5/8 Inch ID NBR Fuel Line Hose 10AN Push on Hose for Small Engine 10 Feet

#ad
Eunice #ad - Please check the pressure of application before purchase. How to use: use hose barbs and fuel line clamps to install. Size: id: 5/8" 16mm, an10 fuel hose, od: 09 inch 23mm, length: 10FT. Working pressure: 06mpa, burst pressure: 1. 8mpa, temperature range: -40°F to 248°F. Application: designed for conveying gasoline, truck, diesel, engine oil or water in car, bus, automotive, biodiesel fuel, etc. Material: this small engine fuel line is made of high-quality NBR, which is oil resistant.
BrandEunice #ad
ManufacturerEunice #ad

8. LTI

#ad

10AN, LTI Universal 10ft Nylon Stainless Steel Braided 5/8" AN10 PTFE E85 Fuel Line Hose Injection BLACK

#ad
LTI #ad - Outside diameter: 062" 16mm. We provided 12 months warranty from the date of purchased. Bursting pressure psi: 6000psi. Please measure before purchase! Fit for AN PTFE hose end fitting ONLY. Free return within 30 days NO QUESTION ASK. This ptfe nylon braided fuel hose are specially designed to work in any automotive project.

This hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility. Application: fuel, alcohol, ethanol, lube, coolant and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes. This hose is made of high-quality ptfe on the inside that gives them high chemical and heat resistance, extreme pressure resistance, along with a braided Black Nylon outside which gives them high durability, and Professional installation is highly recommended.

Working temperature range: -76℉ to 446℉ -60℃ to 230℃. Pressure rating: maximum Working Pressure psi: 2000 psi. Ptfe nylon braided fuel line can be used as fuel injection hose, vacuum line, fuel return line, transmission oil cooler line, vapor return line, carb fuel line, EFI fuel line, ls engine swap fuel line, turbo oil feed and boost line, fuel supply line and other high temperature high pressure applications. Inner diameter: 05" 12. 95mm.
BrandLTI #ad
ManufacturerLTI #ad

9. KRD PERFORMANCE

#ad

Lubricants and Coolant 2 feet, Oils, E10, 5/8 ID , AN10, E85, Ethanol, KRD PERFORMANCE Black -10 AN NBR Push on Hose Fuel Line Compatible with Fuel System

#ad
KRD PERFORMANCE #ad - Compatible with fuel system, oils, E10, E85, Ethanol, Lubricants and Coolant System. Id size: 5/8", 25mm. Works with push-on hose end fittings, suit 400 & 510 series hose ends. Material: made by high-graded Nitrile Rubber NBR with Textile Reinforced, Covered by Elastomer. Working pressure rating 290 PSI, Burst Pressure is 850 PSI. Operation temperature ranges from -30 c degree to 100 C degree. 10 an, 15. 9mm; od size: 1", length: 2 feet.
BrandKRD PERFORMANCE #ad
ManufacturerKRD PERFORMANCE #ad
Height0.5 Inches
Length1 Inches
Width0.5 Inches
ModelNBR-10AN-2_BK

10. YIUIY

#ad

Race Gas, Vacuum, Diesel Hose Line Tube Black, Hydraulic Fluid, YIUIY 10AN 5/8" 10FT Fuel Line Hose Braided Nylon Stainless Steel Oil Gas Transmission Oil Cooler Line Coolant Hose Fuel Line Pump Gas

#ad
YIUIY #ad - Excellent flexibility and flame retardancy. Size- length=10 feet3m. Note- double check the hose size before bidding. Outer diameter=079 inches 2010 mm. Material- inner layer:cpe synthetic rubber;middle layer:304 stainless steel wire mesh sleeve;outer layer:braided nylon.

Application- for racing fuel, pump gas, coolant fluid hose, diesel, motor oil & coolant etc. Inner diameter=056 inches 14. 2 mm. Bursting pressure=2465psi17mpa. Nylon braided fuel hoses can be used as transmission oil cooler line, fuel return line, oil feed line, fuel supply line, turbo cooler line, carburetor fuel hose, ls swap fuel line.

Working temperature range=-40℉ to 338℉-40℃ to 170℃. Resistant to high temperature pressure abrasion and aging. Working environment-maximum working pressure=725psi5mpa. Our rubber hose is compatible with rubber fitting adapter. The fitting adapter for PTFE hose is NOT FIT. Not fit for e85.
BrandYIUIY #ad
ManufacturerYIUIY #ad
Part NumberYG1002-AN10-10FEET-BKHF
ModelYG1002-AN10-10FEET-BKHF