As an Amazon Associate I earn from qualifying purchases.

1. Astro Pneumatic Tool

#ad

Astro Pneumatic Tool 7897 Ball Joint Service Tool and Master Adapter Set

#ad
Astro Pneumatic Tool #ad - Set includes all the receiver tubes and removing/installing adapters needed to work on press-fit upper and lower ball joints on most GM, and Dodge 2 and 4 wheel drive pickups, Ford, vans and sport utility vehicles. Forged c-frame press alone can be used to remove and replace universal joints. Removes and replaces press-fit upper and lower ball joints. Blow molded case keeps the tools organized and easy to transport.
BrandAstro Pneumatic Tool #ad
ManufacturerAstro Pneumatic Tool #ad
Height24.2 Inches
Length4.8 Inches
Weight20 Pounds
Width21.1 Inches
Part Number7897
Model7897

2. Astro Pneumatic Tool

#ad

Astro Pneumatic Tool 78620 Subaru Ball Joint Puller

#ad
Astro Pneumatic Tool #ad - Designed for easy use with vehicle on jack stands using a deep 24mm socket and impact or hand wrench. Or use included 5/8-18 thread adapter with any common slide hammer. Unique sliding pin non-rotating design removes ball joints in a single pulling motion without spinning the ball joint stud, reducing the chance of ball joint breakage. For difficult to remove, seized, rusted and/or corroded bolt-in Subaru ball joints. For subaru baja 2003+, impreza 1993+, forester 1998+, Legacy 1990+, Outback 2000+ and more.
BrandAstro Pneumatic Tool #ad
ManufacturerAstro Pneumatic Tool Company #ad
Height2.21 Inches
Length6.65 Inches
Weight1.8 Pounds
Width2.36 Inches
Part Number78620
Model78620

3. Astro Pneumatic Tool

#ad

Astro Pneumatic Tool 7865 Ball Joint Service Tool with 4-wheel Drive Adapters

#ad
Astro Pneumatic Tool #ad - Heavy duty forged steel tool and set is excellent for removal/installation of press-fit parts such as ball joints, universal joint and truck brake anchor pins. Will remove rusted and corroded parts. Set also includes 4-wheel drive ball joint service kit that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle found on Ford, Dodge, GM, IHC and Jeep vehicles. Set contains c-frame press, 2-1/4”x 2-1/2” & 1-3/4”x2”, 3 receiver tubes sizes: 2-3/4”x3"", installation and removing adapters. Blow molded case for easy storage and transport.
BrandAstro Pneumatic Tool #ad
ManufacturerAstro Pneumatic Tool Company #ad
Height3.2 Inches
Length10.8 Inches
Weight17.45 Pounds
Width14 Inches
Part Number7865
Model7865

4. Astro Pneumatic Tool

#ad

Astro Pneumatic Tool 78100 Goliath Ball Joint XL C-Frame Press

#ad
Astro Pneumatic Tool #ad - 9. 1" throat, 11. 9" length. Features 3x the throat space and includes a notched foot that allows for pressing out ball joints without removal of top mount grease fittings. Large ball joint press for max clearance and easier use of tall and stacked adapters. Astro's new forged alloy steel. Includes both long and short drive screws to maintain a shorter overall working length when desired.
BrandAstro Pneumatic Tool #ad
ManufacturerAstro Pneumatic Tool Company #ad
Height2.05 Inches
Length14.76 Inches
Weight14.55 Pounds
Width5.67 Inches
Part Number78100
Model78100

5. Orion Motor Tech

#ad

Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4x4 Adapters, for Most 2WD and 4WD Cars and Light Trucks

#ad
Orion Motor Tech #ad - Essential tool for ball joint service - use the orion motor tech ball joint press set ball joint tool / bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, brake anchor pins, U-joints, and more on most 2-wheel drive 2WD and 4-wheel drive 4WD vehicles without removing the control arm from the vehicle.

Orion motor tech - we pursue outstanding quality and professional technical support. Universally compatible with a wide range of vehicles - fit most american domestic and imported 2-wheel drive 2wd and 4-wheel drive 4WD cars and light pickup trucks that have press-fit type ball joints, GM, include 4-wheel drive 4WD adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle found on Ford, Dodge, IHC and Jeep vehicles. Conveniently organized in custom molded case - ball joint press / bushing/ removal tool kit is enclosed inside a heavy-duty 11” x 3” x 15” inch 27. 9cm x 7.

6cm x 38. 1cm plastic blow-molded carrying case with handle for easy storage, 1x Removal Adapter, safe storage, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Screw, 1x Installation Adapter, 1x Receiving Cup, and quick organization. Professional grade quality and durability - off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Package include: 3x Receiving Tube, 1x Installing Cup. Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion.
BrandOrion Motor Tech #ad
ManufacturerOrion Motor Tech #ad
Height3.54 Inches
Length13.98 Inches
Width11.91 Inches
Part NumberOMTCA BJS-0401-00
Model8542035336
Warranty2 Years Warranty, Free Replace or Full Refund

6. Orion Motor Tech

#ad

For Most 2WD and 4WD Cars and Light Trucks BL, Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4x4 Adapters

#ad
Orion Motor Tech #ad - All-in-one tool kit: 3x receiving tubes, 1x install cup adapter, 1x Screw, 1x Removal Adapter, 1x Forcing-screw Press, 1x installation adapter, 1x Receiving Cup, 1x Installing Cup. Universal compatibility: fits most american domestic and imported cars and light pickup trucks with press-fit type ball joints.

If you are not satisfied with this product or if you have any questions, please feel free to let us know. Easy operation: use the orion motor tech ball joint press tool set with 4wd adapter to effortlessly remove press-fit parts including ball joints, brake anchor pins, U-joints, and more on most 2-wheel drive 2WD and 4-wheel drive 4WD vehicles without removing the control arm. Professional-grade durability: constructed from heavy-duty forged steel with black-oxide finished adapters for maximum strength and longevity that resists rust and corrosion to endure years of heavy use.

Includes a 4wd adapter for service on 1967 - current 1/2 and 3/4 ton 4WD vehicles with the Dana 30 or 44 front axle found on Ford, Dodge, GM, IHC, and Jeep vehicles. Protective carrying case: each component is contained in a heavy-duty plastic carrying case with a handle for safe storage and quick organization.
BrandOrion Motor Tech #ad
ManufacturerOrion Motor Tech #ad
Height3.15 Inches
Length14.57 Inches
Width11.02 Inches
Part NumberBJS0401BL
Model8542035342

7. Astro Pneumatic Tool

#ad

Astro Pneumatic Tool 7868 Master Ball Joint Adapter Set

#ad
Astro Pneumatic Tool #ad - Includes all the receiving tubes and removing/installing adapters needed to work on most GM, Ford and Dodge 2-wheel and 4-wheel drive pick-ups, vans and sport utility vehicles through 1997. Blow molded case keeps the tools organized and easy to transport". Work on press-fit upper and lower ball joints. Set also includes live center forcing screw plug.
BrandAstro Pneumatic Tool #ad
ManufacturerAstro Pneumatic #ad
Height11.8 Inches
Length3.5 Inches
Weight9.05 Pounds
Width17.5 Inches
Part Number7868
Model7868

8. Orion Motor Tech

#ad

Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4wd Adapters, for Most 2WD and 4WD Cars and Light Trucks BK

#ad
Orion Motor Tech #ad - Universal compatibility: fits most american domestic and imported cars and light pickup trucks with press-fit type ball joints. Easy operation: the orion motor tech ball joint press set with 4x4 adapters effortlessly removes press-fit parts including ball joints, brake anchor pins, U-joints, and more on most 2-wheel drive 2WD and 4-wheel drive 4WD vehicles without removing the control arm.

Professional-grade durability: constructed from heavy-duty forged steel with black-oxide finished adapters for maximum strength and longevity that resists rust and corrosion to endure years of heavy use. All-in-one tool set: 3x receiving tubes, 1x screw, 1x installation adapter, 1x Forcing-screw Press, 1x Removal Adapter, 1x Install Cup Adapter, 1x Receiving Cup, 1x Installing Cup.

Protective carrying case: each component is contained in a heavy-duty plastic carrying case with a handle for safe storage and quick organization. Includes a 4wd adapter for service on 1967 - current 1/2 and 3/4 ton 4WD vehicles with the Dana 30 or 44 front axle found on Ford, Dodge, GM, IHC, and Jeep vehicles. If you are not satisfied with this product or if you have any questions, please feel free to let us know.
BrandOrion Motor Tech #ad
ManufacturerOrion Motor Tech #ad
Height11.61 Inches
Length14.96 Inches
Weight17.55 Pounds
Width3.54 Inches
Part NumberBJS0401BK
Model8542035341

9. OTC

#ad

And Brake Anchor Pin Service Kit with Storage Case, OTC 7249 Ball Joint, U-Joint

#ad
OTC #ad - Contains 3 receiver tubes - 2-3/4 inch id x 3 inch od, 2-1/4 inch ID x 2-1/2 inch OD, and 1-3/4 inch ID x 2 inch OD. Sturdy blow molded hard case keeps contents protected and secure when not in use. Includes 1 each; installing cup, receiving cup, and installing adapter. Otc's ball joint, and brake anchor pin service Kit removes and installs press-fit parts such as ball joints, universal joints, U-Joint, and truck brake anchor pins. Clamp frame features heavy duty materials and construction to prevent distortion in severe use cases.
BrandOTC #ad
ManufacturerOTC #ad
Height5.7 Inches
Length16.2 Inches
Weight0.02 Pounds
Width16 Inches
Part Number7249
Model7249
Warranty1 year manufacturer

10. Orion Motor Tech

#ad

Orion Motor Tech 21PCS Master Ball Joint Press | Upper and Lower Ball Joint Removal Tool | Automotive Mechanic Tool Set

#ad
Orion Motor Tech #ad - If you are not satisfied with this product or if you have any question, please feel free to let us know. Professional grade quality and durability - off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Universally compatible with a wide range of vehicles - use the orion motor tech ball joint press set ball joint tool / bushing removal tool with all the receiver tubes and removing/installing adapters needed to effortlessly remove press fit parts including ball joints, will service perfect for vehicles having the Dana 28, 35, U-joints, brake anchor pins, Chevy, 30, and Dodge 2 and 4 wheel drive pickups, vans and sport utility vehicles, 44, and more on most GM, Ford, 60 axle.

Conveniently organized in custom molded case - ball joint press / bushing/ removal tool kit is enclosed inside a heavy-duty ABS plastic blow-molded carrying case with handle for easy storage, safe storage, 1x Install Cup, 1x Receiving Cup, 1x C-Frame, 1x Center Rod, 1x Install Adapter, 1x Removal Adapter, 3x Receiving Tube, 1x Screw, and quick organization.

Package include: 9x adapters, 1x Install Cup Adapter, 1x Sleeve. Orion motor tech - we pursue outstanding quality and professional technical support. Constructed from heavy-duty forged solid carbon steel with anti-rust black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion. Essential tool for ball joint service - use the orion motor tech 22pcs ball joint press set ball joint tool / Bushing Removal Tool with multi-size adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive 2WD and 4-wheel drive 4WD vehicles without removing the control arm from the vehicle.
BrandOrion Motor Tech #ad
ManufacturerOrion Motor Tech #ad
Height19.69 Inches
Length24.02 Inches
Width4.72 Inches
Part NumberBJS 002100 GWCA