Top 10 Automotive Wire Sleeving – Automotive Replacement Exhaust Heat Shields

As an Amazon Associate I earn from qualifying purchases.

1. Electriduct


Pack of 3, 1.25" Aluminum Heat Reflective Fiberglass Sleeving Side Entry High Temperature Protection for Hoses, Wire Harnesses, Cables, Automotive, Exhaust 39" 1 meter, Electriduct 32mm

Electriduct #ad - Rohs and elv approved | oil resistance: GMW 14327 pass. Working temperature: -40°c to + 150°c | heat insulation performance: ≥100°C | Thermal insulation:Test method refer to SAE J2302. Cable harnesses, cable and wire bundles, hoses, tubing…. Side entry sleeve with 25% Overlap | Material: aluminum foil + fiberglass + polyester. Great protection in high temperature environments. Use for heat insulation: high temperature resistance for automotive and insdustrial applications.
BrandElectriduct #ad
ManufacturerElectriduct #ad
Height1.26 Inches
Length39.37 Inches
Width1.26 Inches
Part NumberBS-J-AFS-125-SV-3PK

2. Design Engineering


Design Engineering 010603 Protect-A-Wire Titanium V8 Sleeving Kit to Cover and Protect Spark Plug Wires

Design Engineering #ad - Contains 25 feet of 1/2" id protect-a-wire titanium sleeving, 8 high heat shrink tube ends, and 16 high temp shrink tube ends numbered one through eight two of each.

Developed with proprietary titanium LR fiber technology, the same material as DEI's Titanium exhaust wrap and plug boots. Capable of withstanding extreme hot or cold temperatures, these oil and chemical resistant protection sleeves easily expand to fit larger spark plug wires often used for the V8. The ultimate heat protection for V8 spark plug wires. Withstands 1800 degrees Fahrenheit direct heat or 2500 degrees Fahrenheit radiant heat.
BrandDesign Engineering #ad
ManufacturerDesign Engineering, Inc. #ad
Height11 Inches
Length8.13 Inches
Weight1 Pounds
Width1.44 Inches
Part Number10603
WarrantyDEI warrants to the original retail purchaser with proof of purchase for warranty determination that its products are free from defects in material and workmanship while purchaser owns the vehicle upon which such product(s) were originally installed. DEI’s obligation under this warranty shall be limited to the repair or replacement of parts that are determined by DEI to be defective, or refund of the products original purchase price, at DEI’s option, of the alleged defective product. We pledge that if at any time you encounter a problem with our products, we will strive to correct the problem in the most timely and efficient way possible, subject to the terms, conditions, and Limitations contained herein.



3/4"I.D.x 10FT- 1" I.D.x 10FT, Heat Shroud Sleeve Aluminized Sleeving Express Aluminized Hose and Silver Hose Wire Protection Barrier with Hook and Loop Closure

LEDAUT #ad - Widely applicationsour heat shroud aluminized sleeving extremely pliable for a tight and secure wrap for expand and contract over fittings, terminals and more. High resistance to abrasions, cable, oil spills, temperatures and vibration breakdown.

Easy installationpliable for tight bends, you can trim to desired length, very easy to intall and use it. Tipsplease check the size of the products pictures, take time to contact With Us, type and shape to make sure the aluminized sleeve is the one that you need. If you have any problems, We Are In 24 Hours Service ! Aluminized sleeving withstands 600 degrees F direct, continuous heat and 2000 degrees F radiant heat. But please stay away from open flames.

High performance featuresize:width is 4. 1 inch105mm ,length is 118inch/10ft3m. Added convenience of a hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud sleeves around whatever needs protection and close the edges. Superb craftsmanshiptitanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability.
BrandLEDAUT #ad
ManufacturerLEDAUT #ad
Weight0.42 Pounds
Part NumberLDLBMSTG3/4X10FT

4. Design Engineering


Design Engineering 010914 Heat Sheath GOLD 3/4" I.D. x 36" Line Sleeving Heat Protection up to 800°F

Design Engineering #ad - Withstands 800°f radiant heat to keep critical lines, air intakes and hoses cool and protected. Slide over wires, cables and hoses for extreme heat protection. Heat treated glass fiber base material. Fit type: Universal Fit. Trim to desired length. Manufactured from dei's high temperature Metalized Polyimide lamination, bonded to a robust 20oz. Available in a variety of diameter sizes to suit your needs.
BrandDesign Engineering #ad
ManufacturerDesign Engineering, Inc. #ad
Height10 Inches
Length3.5 Inches
Weight0.2 Pounds
Width1.5 Inches
Part Number10914
WarrantyLimited Manufacturer Warranty

5. Shineyoo


Heat Wrap Shield Sleeve For Wire Hose Auto Fiberglass 10FT-25MM1" Black Exhaust Heat Shield For Car Wire Loom Heat Shield Brake Line Cable Heat Shield

Shineyoo #ad - Package includes:auto heat sleeve Fiberglass Adjustable Heat Shield 10FT-25MM1". 100% quality material : Heat shield sleeve mainly made of high quality fiber glass. Effectively :this wire heat shield is easy to installation.

Capable of reducing up to 60 percentage of radiant heat. Fiberglass sleeving withstands operating reflective temperature of 600℉continuous and 1100℉intermittent. Simply pull the wires inside, AN hoses, cables etc. 100% satisfaction:if you are not satisfied with our heat shield sleeve, please contact us, we will try our best to solve your problem.

Perfect fit:heat shield car black fiberglass hot rod sleeve helps to prevent vapor lock, protects wires from melting, cable, protecting sensitive wire looms form close proximity heat, shielding brake lines and hose and stopping clutch cables from melting. It can expand and contract over fittings, terminals and more.
BrandShineyoo #ad
ManufacturerSY25MMHSTG #ad
Part NumberSY25MMHSTG



Heat Hose Fiberglass Wrap Shield Sleeve- 1/2" ID x 10'Black Adjustable Hose Heat Shield Spark Plug Wire fuel line heat shield Roll For Car Wire Loom cable Heat Shield Brake Line Cable Heat Shield

LEDAUT #ad - Fiberglass auto sleeving withstands operating reflective temperature of 600℉continuous and 1100℉intermittent. Our fiberglass sleeving special weave that allows it to expand and contract over fittings, cable, terminals and more.

Caution: keep it away from the open fire ! Capable of reducing up to 60 percentage of radiant heat. Black fiberglass hot rod car sleeve helps to prevent vapor lock, AN hoses, protects wires from melting, shields oil and brake lines. This black auto wire heat shield is mainly made of high quality fiber glass. Easy to installation. Simply pull the wires inside, AN hoses, cables etc.
BrandLEDAUT #ad
ManufacturerLEDAUT #ad
Part NumberLDFHG15300



Bentley Harris ConvoShield Aluminized Nylon Wire Loom Tubing – 1/4" Inch Diameter – 39” Inch Long | Chrome Finish | Aluminum Wire Loom | High Temp. For Automotive Applications

KABLE KONTROL #ad - Fluid resistance – bh100-003 ref ms-na1-7: fluid resistance 30 min soak, 3% salt solution, diesel Fuel 60 min, motor oil, Antifreeze Solution, Brakes Fluid, distilled Water, transmission fluid, Gasoline, Power Steering Fluid, Washer Fluid – No Sign of Production Degradation or Delamination of Coating. The efficiency and usability of this wire loom make it a trusted product by the automobile industry, manufacturing companies, and car owners for everyday usage at the office and garage.

Dimensions – nominal diameter: 1/4” inch | length: 39” inch | color: chrome | material: aluminized nylon co-polymer | design: tubular | maximum operating temperature: +175°C +347°F | Minimum Operating Temperature: -40°C -40°F | Protection Up To 1000°F | Exterior Surface: Highly Reflective Aluminum | Radiant Heat Protection | Static Dissipation | RFI Shielding | Halogen Free. Material – kable kontrol’s chrome wire loom sleeving is made from aluminized nylon and serves as the ideal solution for the coverings of all automotive applications. The convoshield aluminized split tubing protects your cables and wires from heat and high-temperature environments.

The slit design makes the installation of new wires, and already existing wires, through the side-entry quick and easy. The convoshield thermal sleeving is an easy-to-install and durable option to protect your automotive wires and other applications. Specifications – heat aging: aged at 170°c for 168 hours – no damage to product | cold bend test: low temperature flexibility: -40°c | heat distortion: oven aging at 180°c for 3 hours – product not Flat or Distorted | FMVSS 302 Automotive: Flammability Test – Pass | Applied Voltage Rate of 500 V/S in Dielectric Chamber: Electrical Conductivity – Classed Insulative in 12V Applications | Substrate Base: Nylon Co-Polymer | Substrate Surface: Thermoplastic Molded Tubing.
ManufacturerDuraline #ad

8. YaeMarine


10FT-6MM, Wire Shield Sleeve, YaeMarine 1/4 Inch 10FT Auto Heat Sleeve, Fiberglass Heat Wrap, Adjustable Black Exhaust Heat Shield Roll For Car & Auto Wire Loom Heat Shield Black

YaeMarine #ad - Advantages : helps to prevent vapor lock, AN hoses, protects wires from melting, shields oil and brake line;. Auto heat sleeve : mainly made of high quality fiber glass.

Easy to install : simply pull the wires inside, also can use for AN hoses, cables etc;. Temperature range : black fiberglass Heat Shield Sleeving Withstands operating temperature of -40 ~ 400 degrees Celsius;. Features flexibility, flame retardancy and radiation protection, UV resistant, soft, light, heat insulation, abrasion resistance, etc. ;. Note: keep it away from the open fire ! you can get the most friendly customer service, please feel free to contact us if you encounter any problems during use, 90 days free return or refund.
BrandYaeMarine #ad
Part NumberDO-0017

9. Design Engineering


Design Engineering 010418 Heat Sheath 1/2" I.D. x 3ft Aluminized Sleeving for Ultimate Heat Protection

Design Engineering #ad - Pliable for tight bends. Trim to desired length. Withstands 500 degrees f direct, continuous heat and 2000 degrees F radiant heat. Five popular diameters to choose from: 1/2", 3/4", 1-1/4", 1", and 1-1/2". Slide over wires, cables and hoses for extreme heat protection.
BrandDesign Engineering #ad
ManufacturerDesign Engineering #ad
Height1.5 Inches
Length10.1 Inches
Weight0.2 Pounds
Width3.4 Inches
Part Number10418
WarrantyNot applicbale



Heat Hose Fiberglass Wrap Shield Sleeve Wire Fuel Line Heat Shield Roll High Temp Black Colour Adjustable 10FT-13MM1/2" for Car Wire Loom Protection

ZHUBANG #ad - Easy to install: our fiberglass sleeves are specially woven and can be expanded and shrunk by fittings, etc. Application: heat sleeve fiberglass can withstand 1100°F continuous and 2000°F intermittent.

Material: the heat sleeve fiberglass is mainly made of high quality fiber glass. It's can reduces radiant heat by up to 60%. If you have any questions, please contact us in time, we will do our best to serve you. Simply pull the wires inside, terminals, AN hoses, cables, cables, etc. Best service - if you have any questions about our heat Hose Fiberglass Wrap, we will provide you with a refund service. Effect:helps prevent steam lock and prevent wire melting. It is best to wear long sleeved gloves when installing.
BrandZHUBANG #ad
ManufacturerZHUBANG #ad
Part NumberZBHGTG