As an Amazon Associate I earn from qualifying purchases.







Whether you have a stock ls motor or a highly modified ls motor, replacing your rockers with upgraded trunion kit is highly recommended. Our special c932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion. The bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade.
Our innovative design prevents premature failures caused by the weak O. E. These channels constantly feed oil to the bushing surface ensuring proper lubrication. Ls rocker arms with bronze bushing style bearing trunions Professionally Installed includes LS1 LS2 LS3 LQ9 LQ4 Rocker Arm Support Pedestal Stands. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. The stock bearings have a tenancy to fail.


They have new trunion Bearings Professionally Installed and include new bolts for installation. The new design utilizes caged roller bearings that greatly reduce the possibility of the bearing failure experienced with stock LS needle bearings, which can send loose needles throughout the engine upon failure.
Be sure to rotate the trunion so that the flat recess side of the trunion's center hole faces upward the socket head cap screw must seat against this recessed flat side of the hole. Tighten the cap screw to a value of 22 ft-lbs, following the OE installation procedure. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1, 000 hp Turbo Motor. Ls3 rocker arms with bronze trunion bushing bearings professionally installed these performance LS3 Intake Rocker Arms feature offset fulcrum for use on LS3, L99 L76 L92 LS9 LSA "square port" cylinder heads.
1. NISTO
#ad
NISTO Engine Cradle Subframe Crossmember + Rear Trailing Arm Bushing Bush For 2007-2018 Nissan Rogue
#adNISTO #ad - Fit: nissan qashqai 2006 2007 2008 2009 2010 2011 2012 2013. Fit: renault koleos 2007 2008 2009 2010 2011 2012 2013 2014 2015. Fit: nissan rogue 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018.More information #ad
Fit: nissan x-trail 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018. Complete set of 6 - brand New Premium Aftermarket Replacement Automotive Part.Brand | NISTO #ad |
Manufacturer | Nisto Rubber Manufacturing #ad |
Height | 5.51 Inches |
Length | 7.09 Inches |
Weight | 6.61 Pounds |
Width | 5.51 Inches |
Part Number | NRAB2PC-JG000+cradle |
More information #ad
2. BMR Suspension
#ad
BMR Suspension BK024 Camaro Bushing Kit Rear Cradle 10-15, 1 Pack
#adBMR Suspension #ad - Package weight: 7. 2 pounds. Package dimensions: 4. 6 h x 14. 0 l x 103 w inches. Country of Origin : United States. Designed for street performance, drag Race, and handling applications.More information #ad
Brand | BMR Suspension #ad |
Manufacturer | BMR Suspension #ad |
Height | 4.6 Inches |
Length | 14 Inches |
Weight | 7.2 Pounds |
Width | 10.3 Inches |
Part Number | BK024 |
Model | BK024 |
More information #ad
3. BMR Suspension
#ad
BMR Suspension BK030 Camaro Rear Cradle Bushing Kit 10-15, 1 Pack
#adBMR Suspension #ad - Package dimensions: 4. 5 h x 14. 2 l x 102 w inches. Designed for street performance, drag race, and handling applications. Package weight: 13. 35 pounds. Country of Origin : United States.More information #ad
Brand | BMR Suspension #ad |
Manufacturer | BMR Suspension #ad |
Height | 4.5 Inches |
Length | 14.2 Inches |
Weight | 13.35 Pounds |
Width | 10.2 Inches |
Part Number | BK030 |
Model | BK030 |
More information #ad
4. PSB
#ad
Front Subframe Crossmember Engine Cradle Poly Bushings for 08-18 Nissan Rogue
#adPSB #ad - Polyurethane bushing which solves many of the problems inherent in the standard rubber OEM bushing. Manufactured from polyurethane with OEM Durometer Hardness.More information #ad
Our bushings have been engineered to replace the OE bushings re-useing the original hardware. Lubricant included. Fits: 10-18 nissan juke 08-18 rogue 08-18 X-Trail 07-12 Sentra. Armstrong products have a lifetime warranty.Brand | PSB #ad |
Manufacturer | Armstrong Distributors #ad |
Part Number | PSB-345-346-ROGUE |
More information #ad
5. MOOG
#ad
MOOG K200852 Control Arm Bushing Kit
#adMOOG #ad - Highly precise engineering -- optimized for quiet operation and resistance to wear, salt, road grime and oils. Premium materials -- made from high-quality elastomer compounds for durability and ride performance.More information #ad
Oe-style design -- engineered to match or exceed OE requirements. Rigorous testing -- comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on.Brand | MOOG #ad |
Manufacturer | MOOG Chassis Products #ad |
Height | 9.99 Inches |
Length | 9.99 Inches |
Weight | 1.1 Pounds |
Width | 9.99 Inches |
Part Number | K200852 |
Model | K200852 |
More information #ad
6. MOOG
#ad
MOOG K200119 Control Arm Bushing Kit
#adMOOG #ad - Rigorous testing -- comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on. Highly precise engineering -- optimized for quiet operation and resistance to wear, salt, road grime and oils.More information #ad
Premium materials -- made from high-quality elastomer compounds for durability and ride performance. Oe-style design -- engineered to match or exceed OE requirements.Brand | MOOG #ad |
Manufacturer | MOOG Chassis Products #ad |
Height | 2.7 Inches |
Length | 5.5 Inches |
Weight | 1.5 Pounds |
Width | 3.3 Inches |
Part Number | K200119 |
Model | K200119 |
Warranty | Limited Warranty |
More information #ad
7. NISTO
#ad
NISTO 2 Rear Trailing Arm Bushing Bushes Bush Left Right Kit For 2007-2018 Nissan Rogue All Models
#adNISTO #ad - Fit: nissan rogue 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018. Fit: renault koleos 2007 2008 2009 2010 2011 2012 2013 2014 2015. Fit: nissan qashqai 2006 2007 2008 2009 2010 2011 2012 2013.More information #ad
Fit: nissan x-trail 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018. Complete set of 2 - brand New Premium Aftermarket Replacement Automotive Part.Brand | NISTO #ad |
Manufacturer | Nisto Rubber Manufacturing #ad |
Height | 4.33 Inches |
Length | 7.09 Inches |
Weight | 2.2 Pounds |
Width | 5.51 Inches |
Part Number | NRAB2PC-JG000 |
More information #ad
8. Michigan Motorsports
#ad
Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit Includes LS1 Rocker Arm Support Pedestal Stands Pair 4.8 5.3 5.7 6.0 LS1 LS2
#adMichigan Motorsports #ad - Includes two stands - enough for both heads. Our bushing gets more lubrication and has less load applied to it than the bushing in the small end of a connecting rod, giving it long service life. These rocker arms are a must have for any aggressive heads and cam combo.Whether you have a stock ls motor or a highly modified ls motor, replacing your rockers with upgraded trunion kit is highly recommended. Our special c932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion. The bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade.
More information #ad
Or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O. E. These channels constantly feed oil to the bushing surface ensuring proper lubrication. Ls rocker arms with bronze bushing style bearing trunions Professionally Installed includes LS1 LS2 LS3 LQ9 LQ4 Rocker Arm Support Pedestal Stands. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. The stock bearings have a tenancy to fail.
Brand | Michigan Motorsports #ad |
Manufacturer | Michigan Motorsports #ad |
Part Number | 76200+F7200 |
More information #ad
9. ACDelco
#ad
ACDelco Professional 45G1130 Front Upper Suspension Control Arm Bushing
#adACDelco #ad - Provides the performance and dependability you expect from ACDelco. Metal sleeve/rubber bushing design supports proper alignment, stability, and durability.More information #ad
Premium, high-quality aftermarket component. Engineered to meet your expectations for fit, form, and function. Manufactured at ts 16949-certified facilities to ensure consistent high-quality.Brand | ACDelco #ad |
Manufacturer | ACDelco #ad |
Height | 2.7 Inches |
Length | 4 Inches |
Weight | 0.5 Pounds |
Width | 3.2 Inches |
Part Number | 45G1130 |
Model | 45G1130 |
Warranty | Limited Lifetime Warranty (Parts Only). Please see ACDelco.com for more details. |
More information #ad
10. Michigan Motorsports
#ad
With Bronze Trunion Bushing Kit Installed L99 L76 L92 LS9 LSA, Michigan Motorsports LS3 Rocker Arms
#adMichigan Motorsports #ad - We utilize rocker arms and new ls rocker arm retro-fit trunion kit that replaces the cageless, loose OEM needle bearings and powdered metal trunion with a premium 8620 steel alloy trunion and caged roller bearings for added durability. Whether you have a stock ls motor or a highly modified ls motor, replacing your rockers with a true roller bearing setup is highly recommended.They have new trunion Bearings Professionally Installed and include new bolts for installation. The new design utilizes caged roller bearings that greatly reduce the possibility of the bearing failure experienced with stock LS needle bearings, which can send loose needles throughout the engine upon failure.
More information #ad
Install the upgraded rocker arms to the cylinder heads using the new socket head cap screws supplied. This kit includes: 16 ls3 series rocker arms 16 rocker arm trunnions- LS3-type retrofit 32 rocker arm bearings- LS3-type retrofit 32 rocker arm retaining rings- LS3-type retrofit 16 bolts for LS3 trunnion kit. Be sure to rotate the trunion so that the flat recess side of the trunion's center hole faces upward the socket head cap screw must seat against this recessed flat side of the hole. Tighten the cap screw to a value of 22 ft-lbs, following the OE installation procedure. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1, 000 hp Turbo Motor. Ls3 rocker arms with bronze trunion bushing bearings professionally installed these performance LS3 Intake Rocker Arms feature offset fulcrum for use on LS3, L99 L76 L92 LS9 LSA "square port" cylinder heads.
Brand | Michigan Motorsports #ad |
Manufacturer | Michigan Motorsports #ad |
Part Number | 24500-8+F7500-8+74300+assembly |
More information #ad