Top 10 Filtro De Aceite De Motor Honda – Automotive Replacement Oil Filters

As an Amazon Associate I earn from qualifying purchases.

1. Honda

#ad

Genuine Honda 15400-PLM-A02 Oil Honeywell Filter, Blue

#adHonda #ad - Exact fit. Genuine oem factory part. This is not an aftermarket part. Best in quality. Oem. Durable.

Brand	Honda #ad
Manufacturer	Honda #ad
Height	2 Inches
Length	4 Inches
Weight	0.2 Pounds
Width	2 Inches
Part Number	15400-PLM-A02
Model	15400-PLM-A02
Warranty	Limited warranty

2. Bosch Automotive

#ad

Dodge, Honda Accord, Civic, TL, Chrysler, RDX, Infiniti, Pilot, Ford, Nissan + More, Bosch 3323 Premium FILTECH Oil Filter for Select Acura MDX, CR-V, RSX

#adBosch Automotive #ad - Exclusive filtech media technology Screens Out More Harmful Contaminants For Greater Engine Protection. Silicone anti-drainback valve Ensures A Supply Of Clean Oil When The Vehicle Is Started. Strong steel base plates and Housings Prevent Warpage, Leaks, And Poor Fit. Bosch recommends The Use Of Castrol Motor Oil.

Brand	Bosch Automotive #ad
Manufacturer	Bosch #ad
Height	0 Inches
Length	0 Inches
Weight	0.45 Pounds
Width	0 Inches
Part Number	3323
Model	3323
Warranty	All Bosch Premium Oil Filters are designed to meet or exceed all original equipment manufacturer warranty requirements for the change interval specified by the manufacturer. They fit better, perform better and offer superior engine protection versus other filter brands.

3. Fram

#ad

Black, Fram PH7317 Extra Guard 10K Mile Change Interval Spin-On Oil Filter

#adFram #ad - Designed for everyday drivers who perform frequent maintenance on their vehicles. Silicone anti-drain back valve helps ensure safe engine start up. A special blend of fibers and resin creates a proprietary filter media that captures 95% of dirt particles that can cause harmful engine wear. 95% dirt-trapping efficiency. Engineered for use with conventional or synthetic motor oil. Proven protection for up to 10, 000 miles.

Brand	Fram #ad
Manufacturer	FRAM #ad
Height	3.69 Inches
Length	2.78 Inches
Weight	0.4 Pounds
Width	2.78 Inches
Part Number	PH7317
Model	PH7317
Warranty	As Labeled

4. Purolator

#ad

Purolator PL14610 PurolatorONE Advanced Engine Protection Spin On Oil Filter

#adPurolator #ad - Silicone anti-drainback valve that lasts longer than traditional nitrile to protect against dry starts and oil leaks. High-density synthetic blend media. Metal end caps and center tube provide stability and integrity for greater wear resistance. 99% dirt removal power. Optimizes engine life for up to 10, 000 miles when used with a full synthetic oil.

Brand	Purolator #ad
Manufacturer	Purolator #ad
Height	2.88 Inches
Length	2.88 Inches
Width	3.63 Inches
Part Number	PL14610
Model	PL14610
Warranty	Purolator filters are warranted to be free from manufacturer's defects in material, workmanship or design in accordance with the terms and conditions described below. Purolator filters meet or exceed OEM (original equipment manufacturers) requirements and are tested in accordance with the Society of Automotive Engineers' test procedures. New car warranties remain in effect when Purolator filters are used in accordance with the engine manufacturer's change intervals. In the event of an engine failure directly caused by a defective Purolator filter, which was properly installed and changed following the engine manufacturer's recommended service intervals and was in accord with current Purolator catalog recommendations, Purolator warrants that it will pay for the repair or, if necessary, replacement of an engine or other parts damaged as a result of any defect in any of our filters. Claims for engine repairs provided under this warranty must be submitted within 30 days after discovery of damage. Purolator Technical Services Department reserves the right to examine the engine and filter to determine the amount of damage and whether it was caused by a defective Purolator filter. This warranty does not cover any product that has been subjected to misuse, neglect, negligence or accident, or that has been improperly maintained, operated or installed. The warranty does not apply to any damage to the product that is the result of rust or corrosion. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WHICH ARE EXPRESSLY EXCLUDED. PUROLATOR SHALL NOT BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES RESULTING FROM OR CAUSED BY THE USE, OPERATION, FAILURE OR DEFECT OF ANY PUROLATOR FILTER. This warranty gives you specific legal rights. You may also have other rights which vary from state to state.

5. Mobil 1

#ad

Mobil 1 M1-110A Extended Performance Oil Filter

#adMobil 1 #ad - Country of Origin: United States. Package Quantity :1. Product type : Auto Accessory. Package dimensions : 8. 6"l x 9. 6"wx7. 5"h.

Brand	Mobil 1 #ad
Manufacturer	Mobil 1 #ad
Height	4 Inches
Length	4 Inches
Weight	0.05 Pounds
Width	4 Inches
Part Number	M1-110A
Model	M1-110A
Warranty	As Labelled

6. Honda

#ad

Honda 15400-PLM-A02 Oil Filter Case of 5

#adHonda #ad - Metal end caps and center tube provide stability and integrity for greater wear resistance. Genuine oeM Honda Part. High-density synthetic blend media. Silicone anti-drainback valve that lasts longer than traditional nitrileprotect against dry starts and oil leaks.

Brand	Honda #ad
Part Number	15400-PLM-A02
Model	15400-PLM-A02

7. Motorcraft

#ad

Motorcraft FL816 Oil Filter

#adMotorcraft #ad - Captures engine harming particles. Provided with anti-drain back valve. 12 months warranty. Pressure-relief valves also help maintain the supply of oil to the engine under extreme cold conditions or if the filter gets clogged.

Helps protect against engine wear by screening out abrasives, such as carbon, sand, dust and bits of metal before they can get into your oil. Durable. Efficient filter media offers increased dirt-collecting capability and ability to capture more engine-harming particles. Resistant to rust and heat. Steel cases are “ironed” for a precise fit, fluted to ease removal and painted to resist rust. Pressure-relief valves help minimize the chance of contaminated oil circulating back into the engine.

Brand	Motorcraft #ad
Manufacturer	Motorcraft #ad
Height	3.4 Inches
Length	2.77 Inches
Weight	0.03 Pounds
Width	2.77 Inches
Part Number	FL816
Model	FL816

8. Fram

#ad

FRAM Tough Guard TG7317, 15,000 Mile Protection Spin-On Oil Filter

#adFram #ad - 99% dirt-trapping efficiency. Sure grip anti-slip texture makes changing FRAM oil filters quick and easy. Engineered for use with premium conventional and semi-synthetic oil. Proven protection for up to 15, 000 miles. Ideal balance of dirt trapping efficiency and dirt holding capacity.

Brand	Fram #ad
Manufacturer	FRAM #ad
Height	3.7 Inches
Length	2.8 Inches
Width	2.8 Inches
Part Number	TG7317
Model	TG7317
Warranty	TRV146727

9. Honda

#ad

HONDA 08C35-A141L01 Honda Pro GN4 Motor Oil, 1 gal, 10W40

#adHonda #ad - Genuine oEM Honda oil. Honda set the standard for motorcycle oil when it introduced GN4 way back in 1975. Specifically designed for the unique requirements of motorcycle and ATV engines. 1 gallon, 10W40 .

Brand	Honda #ad
Manufacturer	HONDA #ad
Height	11 Inches
Length	7 Inches
Weight	7.5 Pounds
Width	3 Inches
Part Number	08C35-A141L01
Model	08C35-A141L01

10. K&N

#ad

K&N Motorcycle Oil Filter: High Performance, KN-204-1, Triumph, Premium, Kawasaki, Yamaha Motorcycles, Designed to be used with Synthetic or Conventional Oils: Fits Select Honda

#adK&N #ad - Versatile compatibility: Designed to operate with all synthetic, conventional, and blended motor oils. Heavy-duty construction: Heavy-duty canister for outstanding durability.

Easy to remove: Fast and easy Wrench-Off removal. No-hassle warranty: 1-Year Limited Warranty. High capacity: withstand the longer service intervals now recommended by some vehicle manufacturers. Protect your engine: Pleated synthetic-blend filtration media removes most harmful contaminants. High flow rates: designed to provide exceptional flow rates and a consistent flow of oil to your engine. Extensively tested: Laboratory tested to ensure excellent capacity and burst strength.

Brand	K&N #ad
Manufacturer	K&N Engineering #ad
Height	3.27 Inches
Length	2.8 Inches
Weight	0.44 Pounds
Width	2.8 Inches
Part Number	KN-204-1
Model	KN-204-1
Warranty	1 Year Limited