As an Amazon Associate I earn from qualifying purchases.
1. EPAUTO #ad
EPAuto 12V-DC ATC/ATO 12 AWG In-Line Fuse Holder for 30A fuses, 10 Pack #adEPAUTO #ad
- Waterproof lid for a rainy day. Heavy duty 12 awg gauge Red Color Wire. Support up to 30a fuses for 12V DC. In-line fuse holder for ATC/ATO type fuses. Not directly in water.
2. Nilight #ad
50029R 120 Pcs Standard Blade Fuse 5A/7.5A/10A/15A/20A/25A/30A AMP Assorted Set with 10 Pack 14AWG ATC/ATO Inline Fuse Holder, 2 Years Warranty, Nilight #adNilight #ad
- 5 × 5. It's no doubt that this is an inline fuse holder extremely safe and reliable. Fuse type: blade. 1 × 18. Package include: 10 x 14awg atc/ato inline Fuse Holder and 120 PCs standard blade fuse+Puller.
74 x0 Protect your car and your electrical device from short circuit, overload etc. 3 inch. Material: Zn alloy/Plastic. Safety protection: unique design of the dual slot tight-fitting waterproof lid to enhance moisture-proof and waterproof performance.
Standard blade fuse: 075 x01 mm. 5a, 30a atc/ato blade fuse of 19. Suitable fuses: fits for 1a, 2a, 5a, 10a, 25a, 3a, 15a, 4a, 20a, 7.10 pack in-line fuse holder: heavy duty 14 gauge AWG red color wire, great look and added protection to the circuit.
|Warranty||2 Years Warranty|
3. MCIGICM #ad
MCIGICM 12 AWG Inline Fuse Holder with 30A ATC/ATO Blade Fuse, 5 Pack #adMCIGICM #ad
- Package included 5 x fuse holder & 5 x 30A blade fuse. Heavy duty 12awg wire, better protection to the circuit. Wire length: 8. 7 inches 12 gauge wire each side, Fuse holder dimension: 41x35x15mm.
Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside. Fits for 1a, 15a, 3a, 25a, 7.5a, 4a, 20a, 5a, 10a, 2a, 30a atc/ATO blade fuse.
4. Nilight #ad
Nilight 10 Pack NI-FH01 Inline Holder 14AWG Wiring Harness ATC/ATO 30AMP Blade Automotive Fuse Holder-10, 2 Years Warranty #adNilight #ad
- 5a, 30a atc/ato blade fuse of 19. Safety protection: heavy duty 14 gauge AWG red color wire, great look and added protection to the circuit. 5 × 5. 1 × 18. Water resistance: tight-fitting waterproof lid, great damp-proof and waterproof performance, this item is safe and reliable.
Package include: 10 x 14awg ATC/ATO Inline Fuse Holder. Suitable fuses: fits for 1a, 25a, 3a, 2a, 4a, 10a, 20a, 5a, 15a, 7.1 mm. Premium quality: high-quality materials ensure good bending performance, melting resistance and excellent electrical conductivity.
|Warranty||2 years Warranty|
5. Qizpcer #ad
10 Gauge Fuse Holder, 10 AWG Inline Fuse Holder with 40 AMP ATC Blade Fuses 4pack #adQizpcer #ad
- Inline fuse holder for ATC/ATO blade fuse. Water resistant, This fuse holder comes with cap to seal out moisture. Fuse holder dimension 42x35x13mm, Support up to 40A fuses for 12V.
Package included 4 x fuse holder and 4 x 40Amp fuse. Heavy duty 10 awg gauge red color wire Allow you to splice it into any project.
6. MULWARK #ad
MulWark 2 Pack 10 Gauge True Copper Marine Wire Waterproof IP67 Inline Fuse Holder Pigtail Blade Fuse Block Relay with 40AMP Automotive Fuses Set for Car Truck ATV Boat Motorbikes #adMULWARK #ad
- Package included: 2 x standard inline fuse holders and 2 x 40Amp standard blade fuse. Wide application: support atc/ato standard blade fuse of 5a, 25a, 10a, 20a, 30a, 7.5a, 15a, easy to use and ideal for car truck, 40A, RVs, ATVs, Jeeps, boats, Motorcycles.
Premium quality wire: high-quality soft red pigtail silica gel wire makes it easier to strip than other materials. Safety protection: the heavy-duty 10 gauge awg tin-plated copper wire features an excellent oxidation resistance that adds protection to the circuit of your car alarms, VCD player, car recorder, GPS, dashboard camera, etc.
Our car fuse can be easily identified by the white mark amp rating figures on the top and allows checking top pins for continuity.
What’s more, the 30cm wire length ensures convenient installation on almost all kinds of automotive devices. Waterproof design: the gauge fuse holder is equipped with a tight-fitting, waterproof rubber cap with IP67 waterproof rating for maximum prevention of water, dust, and dirt from getting in.
|Warranty||MulWark backs up its products with 100% satisfaction guarantee. Deficient products without being improperly used, abused, altered or repaired will be replaced in a timely manner|
7. MCIGICM #ad
3 Pack, MCIGICM 10ga Inline Fuse Holder Waterprrof Pigtail Fuse Relay with 40A Blade Fuse #adMCIGICM #ad
- Wire length: 6 inches 10 gauge wire, Fuse holder dimension: 41x35x15mm. Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside.
Package included 3 x 10 gauge fuse holder & 3 x 40A blade fuse. Fits for 1a, 30a, 10a, 25a, 7.5a, 5a, 15a, 4a, 20a, 2a, 3a, 40a atc/ATO blade fuse. Heavy duty 10awg wire, better protection to the circuit.
8. SIM&NAT #ad
14 Gauge Fuse Holder ATC/ATO, SIM&NAT 10 Packs in-Line Automotive Blade Fuse Holder with 50PCS Standard Car Fuses, 1A 2A 3A / 4A 5A 7.5A 10A 15A 20A 30A Automotive Replacement Fuses #adSIM&NAT #ad
- Package included: 10 pack inline fuse holder + 50pcs car fuses sets 1a / 10a / 3A / 15A / 2A / 7.5a / 20a / 4a / 5a / 30a 5pcs each. Heavy duty 14 awg fuse holders, protecting circuits and electrical equipment.
Premium quality: fuse holders wiring harness select Tin plated copper as conductor to ensure its good bending performance, melting resistance and excellent electrical conductivity.
Suitable fuses: fits for 1a - 30a atc/ato blade fuse of 19. 1 × 18. 5 × 5. 1 mm. Easy to add additional circuits for cars, CD players, fax machines and etc. Waterproof cap of fuse holder: Unique design of dual slot tight-fitting waterproof lid to enhance moisture-proof, waterproof performance and dust proof.
9. MuHize #ad
Muhize s Waterproof Standard APR ATO ATC Fuse Holder with 40AMP Standard Fuses, 3 Pack 10 Gauge Inline Fuse Holder #adMuHize #ad
- Keep your car and electric device in a safe condition. Easy to use - easy to plug into an existing fuse holder without splicing or cutting. They ensure a circuit to not overload in any extreme operating conditions or in the event of any short circuit.
Heavy duty - 12awg wire, good electrical conductivity, great look and added protection to the circuit. 100% brand new & made from excellent materials, and melting resistance.
Suitable for 1a, 2a, 30a, 5a, 10a, 15a, 40a; ③ for car suv atv truck trailer boat marine, 3A, 7.5a, 20a, etc. Excellent waterp-roof design - support up to 40a fuses for 12V DC.
It provides tight-fitting rubber cap with excellent water-proof design. Never easy to fall off or let water in. Package included - ① muhize 3 x in-line standard blade fuse holder large 12 gauge + 3 x 40 amp standard fuse. Widely application - muhize assorted in-line fuse holder kit commonly fits for standard blade fuses rating 2Amp-40Amp, Perfect for Car Truck Boat, etc.
10. MUYI #ad
10ga Fuse Holder, 2 Pack MUYI Inline Fuse Holder 10 Gauge Fuse holders 12v Waterproof Pigtail Blade Fuse Relay with 40AMP ATC Fuses #adMUYI #ad
- Not easy to fall off or let water in. Package included: 2 x standard blade Fuse Holder and 2 X 40Amp Standard Blade Fuse. Inline fuse holder for standard blade fuses, suitable for 1A, 10A, 2a, 30a, 15a, 7.5a, 5a, 3a, 20a, 40a, ideal for car truck trailer atv boat marine.
Wire length: 6 inches 10 gauge wire each side, Fuse holder dimension: 41x35x15mm. Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside. 10 awg thick red pigtail wire allow you to splice it into any project.