As an Amazon Associate I earn from qualifying purchases.

1. Nilight

#ad

LED Light Bar Mounting Bracket, Nilight 2PCS Universal Adjustable Pillar Hood Led Work Light Mount Bracket Clamp Holder for Off Road Jeep Truck SUV Installing Without Drilling, 2 Years Warranty

#ad
Nilight #ad - Package include: 2 x 304 stainless steel brackets Lamp is not included. 2 x hex Allen wrench. Durable material: made of sturdy 304 stainless steel, protecting itself well from corrosion and rust in bad weather.

The clamp kit comes with anti-slip teeth and rubber pad to make sure a firm installation and no scratches left on the surface of the hood. High compatibility: can used to mount different thickness of work lights, fog lights, driving lights etc. Free adjustability: you’re able to freely adjust 180°up and down and 60°left and right to make sure your light is at the exact lighting direction and at a perfect lighting angle. No drilling &anti-slip design: no drilling is required, just clamp the kit and tighten up. As only the max limit of the clamp board thickness on the vehicle is within 8mm.
BrandNilight #ad
ManufacturerNiligh #ad
Height1.57 Inches
Length4.33 Inches
Weight0.46 Pounds
Width1.97 Inches
Part Number90043B
Model90043B
Warranty2 Years Warranty

2. LAMPHUS

#ad

Off-Road ATV UTV Light Bar Mounts Mounting Bracket Bar Clamp Kits 1"/1.5"/1.75"/2" Inch 360-Degree 2 x Stud Size Aluminium 2 Unit Bull Bar Roll Bar Clamp Roll Cage Clamps Mount For ATV UTV

#ad
LAMPHUS #ad - Unmatched versatility - go anywhere with a clamp that is as flexible as your machine. Live without limits - don't be held back by one-dimensional bar clamps. Unyielding protection - specially designed rubber inserts shield your lights against damaging vibrations, provide an unequaled level of light stabilization, and protect against the unforgiving conditions of the off-road.

Engineered to be thicker and more durable than other bar clamps and equipped with rugged stainless steel bolts, these bar clamps have earned their place at the top of the podium. Hang on tight - aggressive, straight knurling on the mounting surfaces gives your lights the traction they need to hold on through the harshest terrain. And with a zero-slip, locking stud design, these clamps won’t twist when you twist the throttle.

Rock solid - on the trail, there's no room for weak hardware. These clamps include adapters to fit 1", 1. 5", 1. 75", and 2" bars and two different length mounting neck with studs for added clearance adjustment. Our unique clamping system features a 360-degree rotating neck designed to give you even more control over your light placement, regardless of the position or angle of your bars.
BrandLAMPHUS #ad
ManufacturerLAMPHUS #ad
Height1.25 Inches
Length6.75 Inches
Width6.25 Inches
Part NumberLBR100A91-X2
ModelLBR100A91-X2

3. Nilight

#ad

Nilight 90020B 2 Pack Mounting Bracket Kit LED Off Road Light Horizontal Bar Tube Clamp Roof Roll Cage Holder, 2 Years Warranty

#ad
Nilight #ad - Sturdy bracket: strong aluminium alloy, fix the light on tube firmly, raise the light bar height to avoid scratches while driving. Easy installation: pre-drilled hole, allows more lights to be added to vehicle without drilling, Allen hex key included for quick installation. Package includes: 2Pcs LED light bar mounting bracket. Wide application: can be used on tubes of 1", 1-1/2", 1-3/4" & 2" In diameter and applied to LED light bar for almost all kinds of vehicle. Useful rubber: high quality rubber inserts dampen driving vibration and avoid scraping bull bar surface.
BrandNilight #ad
ManufacturerNilight #ad
Height2 Inches
Length3 Inches
Weight0.9 Pounds
Width3 Inches
Part Number90020B
Model90020B
Warranty2 years Warranty

4. LAMPHUS

#ad

Off-Road ATV UTV Light Bar Mounts Mounting Bracket Bar Clamp Kits 1"/1.5"/1.75"/2" Inch Horizontal Bar Aluminium 2 Units Bull Bar UTV Roll Bar Clamp Tube Roll Cage Clamps Mount for ATV UTV

#ad
LAMPHUS #ad - Rubber inserts dampen & protect- rubber inserts for snugger fitment with a wider range of sizes; help dampen vibrations during off-roading and protect your bull bar from being scraped.

Comes fully-loaded- includes everything you need to start mounting your favorite LED light bars to your ride, including an Allen Hex Key. Cast aluminum construction- precision-welded from cast aluminum, our clamps are strong & built to last. Add more lights, bull bar, less hassle- simplify the installation of led light bars & work lights without drilling any holes in the bodywork; quickly and securely mount LAMPHUS Cruizer Series Light Bars or any other light bar with 10mm mounting screws to your roof rack, roll cage, or headache rack.

Almost endless applications- can be used on tubes measuring 1", 1. 5", 1. 75" & 2" in diameter; perfect for off-road vehicles, UTVs, ATVs, boats, trucks, farm vehicles & more.
BrandLAMPHUS #ad
ManufacturerLAMPHUS #ad
Height1.25 Inches
Length6.75 Inches
Weight1.25 Pounds
Width6.25 Inches
Part NumberCRLBXXA3-X2
Model8542124607

5. Nilight

#ad

Nilight 90025B Led Light Bar Mounting Brackets 2pcs Universal Hood Led Work Light led Pods Mount Bracket Clamp Holder for SUV Truck Off Road Installed No Need Drilling, 2 Years Warranty

#ad
Nilight #ad - Easy to install. Stable & durable: five Screws are enough to tight the light with the car cover tightly. Made of 304 stainless steel, the surface covered with rubber anti-rust paint, can ensure absolute anti-rust, anti-corrosion. Anti-slip surface: the surface contacting with the front cover of the car covers a multi-layer non-slip composite material and loss prevention materials to ensure that the contact surface of the bracket will not damage the car surface paint. Universal: it can be used to install almost all LED Light Pods. No any damage to the car surface paint.
BrandNilight #ad
ManufacturerNilight #ad
Weight0.22 Pounds
Part Number90025B
Model90025B
Warranty2 Years Warranty

6. Nilight

#ad

Nilight, 90021D 4PCS Mounting Bracket Kit LED Off-Road Light Horizontal Bar Tube Clamp Roof Roll Cage Holder,2 Years Warranty

#ad
Nilight #ad - Useful rubber: high quality rubber inserts dampen driving vibration and avoid scraping bull bar surface. Easy installation: pre-drilled hole, allows more lights to be added to vehicle without drilling, Allen hex key included for quick installation.

Wide application: can be used on tubes of 1"", 1-1/2"", 1-3/4"" & 2"" in diameter and applied to led light bar for almost all kinds of vehicle. Fit type: Universal Fit. Package includes: 4 PCs led light bar mounting bracket. Sturdy bracket: strong aluminum alloy, fix the light on tube firmly, raise the light bar height to avoid scratches while driving.
BrandNilight #ad
ManufacturerNilight #ad
Part Number90021D
Model90021D
Warranty2 Years Warranty

7. Eyourlife

#ad

Side Mounting Bracket,Eyourlife Universal Work LED Light Bar Bracket Bar Side Mounting Bracket Rubber Pad Bracket For Jeep Truck

#ad
Eyourlife #ad - Apply to most side mounted straight or curved LED light bars. Dual mounting ways for different mounting application. With anti-vibration rubber gaskets to avoid car paint damage. Raise the light bar height to avoid scratches while driving. Firmly fix the light bar on place, improve air flow for better heat elimination.
BrandEyourlife #ad
ManufacturerEyourlife #ad
Part Number1

8. Moso LED

#ad

2 Pcs Mounting Brackets for LED Pods Universal Brackets Adjustable Base Brackets for LED Pods Light Bar

#ad
Moso LED #ad - Material: aluminum alloy. Durable mounting brackets were waterproof dustproof shockproof. Buy with confidence: if you have any questions, please feel free to contact Moso LED.

Truck, utv, farming, Tractor and so on. Easy to install: mounting the brackets on your LED light and tighten anti-loose screws, need not worry about fall down and shaking. Also can be free slide in the back of LED light. Wide applications: fit for 4 inch to 54 inch led pods and led light bars, SUV, ATV, suitable for most kinds of Car, 4WD, Off Road. Easy to install:the max adjustable agle of the mounting bracket was 45 degree. Allow you to change the directon of light beam, lighting every corner.
BrandMoso LED #ad
ManufacturerMoso LED #ad
Part Number203
Model13

9. Nilight

#ad

Nilight 2PCS Mounting Base Bracket LED Light Bar Slide Mount Bracket 2 years Warranty 90034B

#ad
Nilight #ad - Fitment: apply to most slide mounted led light bars: 18w, 234W, 72w, 108W, 162W, 36W, 198W, 126W, 252w, etc. Easy to use: works with led light bar, car top racks, grille guard, side mount screws and bolts, directly mount onto your bull bar, etc.

High quality: it is made of strong and lightweight aluminum alloy material. The sturdy bracket can firmly fix the light bar. Adjustable bracket:the pod can be adjusted to about 45 degrees, which makes changing direction of light beam easier. Sliding black block: no need drilling, if there is a mounting hole before, the sliding block can slide left and right to fit the existing holes. Fit type: Universal Fit. Quakeproof when passing through rugged terrain.
BrandNilight #ad
ManufacturerNilight #ad
Part Number90034B
Model90034B
Warranty2 years Warranty

10. AKD Part

#ad

Side Brackets, AKD Part Light Bar Mounting Brackets Kit Universal Side Mount Offroad Truck LED Bar Brackets 2 Pack

#ad
AKD Part #ad - Application: can perfect apply to most side mounted LED Light Bar in the market. Package: including 2 * side mounting brackets + 2 * rubber Pads For a Steady Installation + Necessary Mounting Hardwares Bump protection ring, 8mm Screw set for a strong supporting.

With anti-vibration rubber gaskets to avoid damage to your car paint, and raise the light bar height avoid scratching during driving. Adjustable: angle-Adjustable side mounting brackets allow to achieve optimal angle you need. Material: heavy duty die-cast aluminum. Dimension: 3. 66 * 1. 7 * 1. 28 inch. Do not come with leD LIGHTS).
BrandAKD Part #ad
ManufacturerAKD Part #ad
Weight0.06 Pounds
Part Number306003
WarrantyManufacturer warranty for 2 years from date of purchase