Top 10 Lug Bolts 14×1.5 – Wheel Bolts

As an Amazon Associate I earn from qualifying purchases.

1. StanceMagic

#ad

10pcs Extended Lug Bolts 14x1.5 45mm Shank Length, StanceMagic, Silver Zinc, Not OEM Length, Cone Seat Compatible with Audi TT A3 A4 A5 A6 A7 A8 B5 B6 B7 B8 VW Jetta Golf R32 Passat Beetle

#ad
StanceMagic #ad - Make sure your wheels bolt seat have this seat type. The correct length will depend on your OEM bolt's length and the spacer's thickness. Compatible with audi A7, S6, 2009+ Tiguan. Manufacturing: made with cold forged steel.

Measure before purchasing. Installing bolts that are too long may damage brake components. Specifications pack of 10 - silver bolts | thread size: 14x1. 5 | seat type: cone seat 60 degree Taper | Shank Length: 45mm ie thread length. Zinc coating provides exceptional corrosion/rust resistance and appearance. See diagram for Measuring Help. Not to be used without wheel spacers. Warning: verify vehicle lug bolt size, as various years/models come with different size bolts.

See diagram for Help. This is an extended length lug bolt, not an oem replacement lug bolt. Compatible with volkswagen 2006+ gti, s3, a4, q5, a6, 2000+ jetta, 1993-1998 Golf V6, A5, Including FWD RWD Quattro. Check your vehicle's bolt thread size, ensure that your bolts get 5-8 full turns before tightening. These are cone seat 60 degree Taper shaped bolts. During installation, SEAT AND THREADS.
BrandStanceMagic #ad
ManufacturerPrecision European Motorwerks #ad
Height1.75 Inches
Length6 Inches
Weight2.02 Pounds
Width6 Inches
Part Number14x1.5-45mm-SR-CS

2. Richeer

#ad

Ball Seat R14, Richeer Compatible with 20 PCS Black 14x1.5 Wheel Lug Bolts for Wheel Spacers, 27mm Shank Length 17mm HEX 47mm Overall Length Solid Studs Set

#ad
Richeer #ad - Guarantee: 2 years warranty and contact us if meet any problems, reply in 24hrs. Zinc coating provides exceptional corrosion/rust resistance and appearance. Specs: 14x1.

5 thread pitch, 27mm shank length, overall length 47mm, 17mm hex ,Ball Seat R14. Features:through-hardened for maximum durability and tensile strength. Made with cold forged steel. Fits:the wheel stud is required to use 14x1. 5 thread, and the vehicle with ball seat and round seat is not suitable for 60 degree conical seat. Additional heat Treating Process ensures dependable strength, durability, and performance. Machine precision threads ensure the best fit on your vehicle's hub. Application: install wheel washers in your manufacturer's and year system garage filters, and then check for a suitable model.
BrandRicheer #ad
ManufacturerRicheer #ad
Part NumberAM30135

3. Veritek Performance

#ad

Set of 20 Veritek 14x1.5mm Black Wheel Lug Bolts for Aftermarket Custom Wheels Conical Seat 2.16 Inch 28mm Shank 17mm Hex

#ad
Veritek Performance #ad - Overall length: 2. 16". Shank length/height: 1. 1" 28mm. Meets or exceeds OEM Factory Standards. Hex: 17mm heat treated for aftermarket Custom Wheels Only Not for OEM Factory Use. Through-hardened for maximum Durability and Tensile Strength. Thread: 14x1. 5mm 109 grade Steel.
BrandVeritek Performance #ad
ManufacturerVeritek Performance #ad
Weight3 Pounds
Part NumberVTK-1820BKXS
Model5

4. dynofit

#ad

20pcs Solid Black Ball Seat 48mm Tall Stock/Factory Lug Studs for A1 A2 A3 A4 A5 A6 A7 A8 S1 S2 S3 S4 S5 S6 S7 S8, Fit CC Golf Jetta Lavid Se Cayenne, dynofit 14x1.5 28mm Shank OEM Lug Bolts

#ad
dynofit #ad - Fit for oem/stock/factory rims974491, wht002529, 972351, 7l0601139a, wht001693, 6105391, 431601139, 431601139A. Free exchange if any problems within 12months warranty and no extra shipping fee needed, contact us and reply within 24hrs. Specs: 14 1. 5 thread pitch, overtall 48mm, 28mm shank length, 17mm hex and spherical ball seatR12. Made of matte scm435 better than painting), more corrosion resistance and no rusting even first black layer damaged, spherical design provide tight contact and meet lug bolts mechanical property. Turn off stock one and check the specs if not sure.
Branddynofit #ad
Manufacturerfastfree #ad
Part NumberWB1415T28B-09

5. StanceMagic

#ad

Ball Radius Seat Compatible with Audi TT A3 A4 S4 A5 S5 A6 S6 A7 B5 B6 B7 B8 Volkswagen Jetta Golf GTI Passat CC Beetle, 10pcs Extended Black Lug Bolts 14x1.5 45mm Shank Length, Not OEM Length

#ad
StanceMagic #ad - Machine precision threads ensure the best fit on your vehicle's hub. Measure before purchasing. Manufacturing: made with cold forged steel. Check your vehicle's bolt thread size, ensure that your bolts get 5-8 full turns before tightening.

The correct length will depend on your OEM bolt's length and the spacer's thickness. These are ball seat r13 shaped bolts. Warning: verify vehicle lug bolt size, as various years/models come with different size bolts. Specifications pack of 10 - black bolts | thread size: 14x1. 5 | seat type: ball seat r13 | Shank Length: 45mm ie thread length. See diagram for Measuring Help. Additional heat Treating Process ensures dependable strength, durability, and performance.

Compatible with audi a7, 1999+ golf. Also compatible with volkswagen 1985+ beetle, S6, 1993-1998 Golf V6, 2009+ Tiguan. This is an extended length lug bolt, not an oem replacement lug bolt. Make sure your wheels bolt seat have this seat type. Fitment: compatible with audi a3, 1998+ passat, including fwd rwd quattro. Not to be used without wheel spacers.
BrandStanceMagic #ad
ManufacturerPrecision European Motorwerks #ad
Height1.75 Inches
Length6 Inches
Weight2.12 Pounds
Width6 Inches
Part Number14x1.5-45mm-BS-B

6. Ryin

#ad

17mm Hex, 65mm Length Solid Studs Set, M14x1.50 Thread R12 Ball Seat Wheel Lug Bolt, Ryin 14x1.5 Black Wheel Lug Bolts, 20pcs Lug Bolts 40mm Shank

#ad
Ryin #ad - Strip-resistant machined threads ensure a perfect fit on your vehicle’s wheel studs for years to come. The correct length will depend on your oem bolt's length and the spacer's thickness.

Check your original thread pitch and seat type carefully, this only fit for M14x1. 5 and r12 ball seat as pics shown. Specs: 14x1. 5 wheel lug bolt - m14x1. 5 thread studs - r12 ball seat - 40mm Shank - 65mm Length - 17mm Hex. Installing bolts that are too short or too long may cause them to fall out while driving or damage brake components. Features: we use cold-forged and heat treated scm 435 steel for exceptional strength and maximum dependability. Special coating provides exceptional corrosion resistance and appearance. Wheel lug bolts have a long lasting, high luster finish. Every lug bolt is double nickel plated to surpass 48 hour salt spray testing.
BrandRyin #ad
ManufacturerRyin #ad
Part NumberRY30139US

7. Venum wheel accessories

#ad

Complete Set of 20 Pc Black Powder Coated Conical Seat Lug Bolts 33 mm Extended Shank Length M14x1.5 Works With Volkswagen Audi BMW Mercedes Benz Porsche Vehicle W/ Aftermarket Wheels

#ad
Venum wheel accessories #ad - Will require Wheel Spacers With These Bolts. 20 pc 14x1. 5 black conical seat lug bolts. Lug bolt specs: 17 mm hex | qty: 20 | seat type: conical cone | thread pitch: m14x1.

5 | shank length: 33 mm | finish: Black Powder Coated | Grade 109 steel | corrosion/Rust Resistant. We carry this item in different Length, Thread Pitches, And Over 60 Colors. Works with audi bmw mercedes Benz Porsche Volkswagen With Factory/Aftermarket Wheels With A 14x1. 5 thread Pitch. Authentic venum wheel lug bolts. Designed specifically for factory & aftermarket wheels With A 14x1. 5 thread pitch - Extended Shank Length. These lug bolts are manufactured With The Highest Quality To Meet Or Exceed Factory Standards.
BrandVenum wheel accessories #ad
ManufacturerVenum Wheel Accessories #ad
Part NumberVW-C1415-33BK-20
ModelPowder Coated Lug Bolts

8. StanceMagic

#ad

20pcs OEM Length Silver Lug Bolts 14x1.5 28mm Shank Length, Cone Conical Seat Compatible with Audi TT A3 A4 S4 A5 S5 A6 S6 A7 S7 A8 S8 B5 B6 B7 B8 VW Volkswagen Jetta Golf GTI R32 Passat CC Beetle

#ad
StanceMagic #ad - Additional heat Treating Process ensures dependable strength, durability, and performance. Check your vehicle's bolt thread size, ensure that your bolts get 5-8 full turns before tightening. Make sure your wheels bolt seat have this seat type.

Specifications pack of 20 - silver bolts | thread size: 14x1. 5 | seat type: cone seat 60 degree Taper | Shank Length: 28mm ie thread length. Installing bolts that are too long may damage brake components. These are cone seat 60 degree Taper shaped bolts. Fitment: compatible with audi a3, s6, s5, s3, 1993-1998 golf v6, s7, s8, q7, 1999+ golf. Manufacturing: made with cold forged steel. Important: measure your oem bolt shank length prior to purchasing.

Zinc coating provides exceptional corrosion/rust resistance and appearance. See diagram for Help. Compatible with volkswagen 2006+ gti, a6, a8, including fwd rwd quattro. Also compatible with volkswagen 1985+ beetle, q5, 1998+ passat, 2007-2016 EOS, S4, TT, A4, A5, Including FWD RWD Quattro. Machine precision threads ensure the best fit on your vehicle's hub. Vehicles come with a variety of bolt lengths.
BrandStanceMagic #ad
ManufacturerPrecision European Motorwerks #ad
Height2 Inches
Length4 Inches
Width4 Inches
Part Number20pc-14x1.5-28mm-CS-S

9. Richeer

#ad

60 Conical Seat, Richeer Compatible with 20 PCS Black 14x1.5 Wheel Lug Bolts for Wheel Spacers, 28mm Shank Length 17mm HEX 53mm Overall Length Solid Studs Set

#ad
Richeer #ad - Warranty: 2 years warranty and contact us if meet any problems, reply in 24hrs. Application: install wheel washers in your manufacturer's and year system garage filters, and then check for a suitable model. Features: made of matte scm435 better than painting), more corrosion resistance and no rusting even first black layer damaged. Fits: vehicles with wheel studs requiring a 14x1. 5 thread and wheels that take a conical 60 degree seat, not fit mag seat, ball seat and round seat. Specs: 14x1. 5 thread pitch, 28mm shank length, overall length 53mm, 17mm hex and 60 degree cone seat.
BrandRicheer #ad
ManufacturerRicheer #ad
Part NumberAM30133

10. Veritek Performance

#ad

Set of 20 Veritek 14x1.5mm Black 2.16" 28mm Shank Spline Drive Conical Seat Wheel Lug Bolts for Aftermarket Custom Wheels

#ad
Veritek Performance #ad - Meets or exceeds OEM Factory Standards. Thread: 14x1. 5mm 109 grade Steel. Key hex: 19mm 21mm heat treated for Aftermarket Custom Wheels Only Not for OEM Factory Use. Shank length/height: 1. 1" 28mm. Through-hardened for maximum Durability and Tensile Strength. Overall length: 2. 16".
BrandVeritek Performance #ad
ManufacturerVeritek Performance #ad
Weight3 Pounds
Part NumberVPE-14151820SPBK