As an Amazon Associate I earn from qualifying purchases.



Safe and secure to use:our electric hydraulic jack is will automatically stop working after reaching the height limit. The electric car jack head uses a non-slip design:a cross-shaped groove plus particles protruding from the surface to increase friction. The self-locking fully enclosed design, completely waterproof, no oil leakage, to ensure safety during use.4
Fits most vehicles:the electric jack kit 's two-way power supply battery clip with 12V DC power socket or car cigarette lighter allows any adult to change and repair tires at any time on the garage/highway, best choice for your car, truck or SUV. Notes for using elecric impact wrench: first: paying attention to the sizes when selecting the sleeve; Second: The signal "II" means loosening the screw, and you have to keep pressing "II" until the screw has been loosened. The signal"i" means tightening the screw, and you have to keep pressing "I" until the screw has been tightened.


Height adjustablethe height of the rv stabilizing jack can extend from 11" to 17", they may not rise very high, thus are recommended to use for lower to the ground rigs for sure. Please note: These jacks are only for stabilization usage.
Make your rv stablethese rv stabilizer jacks are made of durable cast aluminum, anti-rust & corrosion resistant, each can support up to 6000lbs, with square base design, with which you needn’t to worry about your RV move or bounce anymore. What will you get4 pack rv stack jacks come with a colorful storage bag, great stabilization solution for your RV, which are ideal for stabilizing and leveling your RV, trailer and camper, etc.

Part number: QJD-3. It will help you lift your vehicle more quickly with 2 handle tools. With lug wrench: the lift jack comes with 1 x telescoping lug wrench and 2xCR-V sockets17/19mm, 19/23mm to loosen or tighten the lug nuts.
Two way to handle: the scissor car lift jack comes with socket drill adapter and ratchet wrench to put the scissor jack up and down. Come with bag: with the carry bag, making your carrying more convenient and making the package more compact. 1 year warrnty, if you have any questions, please feel free to contact us. Included components: jack socket Drill Adapter, Lifting Jack Car Kit with Hand Crank/Wrench/Lug Wrench.


Warranty - covered by a 1 year on material and workmanship. 6" weight 18. Capacity - k tool trolley jack and Jack stands are rated to hold up to 2 tons of weight or 4, 000lbs.

1. HHIP
#ad
HHIP 3900-0070 Machinist's Jack
#adHHIP #ad - Item package Weight:05 lbs. Country of Origin: China. Product type:Hardware Clamp Vise. Item package dimensions:8. 636 cm l x 4. 572 cm w x 4. 826 cm H.More information #ad
Brand | HHIP #ad |
Manufacturer | ABS Import Tools Inc. #ad |
Height | 1.5 Inches |
Length | 4 Inches |
Weight | 0.3 Pounds |
Width | 1.5 Inches |
Part Number | 3900-0070 |
Model | 3900-0070 |
More information #ad
2. TESA Brown & Sharpe
#ad
Brown & Sharpe 599-680 Screw Jack Set
#adTESA Brown & Sharpe #ad - Suitable for leveling work. Extensions can be used individually or together, for versatility. Supplied with two extension bases for usability. Supplied in shop-hardened, protective molded case for protection. Lifting capacity of 1, 000 lbs.More information #ad
Brand | TESA Brown & Sharpe #ad |
Manufacturer | Hexagon Metrology #ad |
Height | 1.7 Inches |
Length | 6.4 Inches |
Weight | 1.6 Pounds |
Width | 4.1 Inches |
Part Number | 599-680 |
Model | 60.30082 |
More information #ad
3. Starrett
#ad
Jack Only Without Attachments, 2-1/4, Low Profile Mount, Starrett 190A “Little Giant” Jack Screw Stand, Stabilizer, 3-3/8" 57-85mm Range, 1-1/4" 32mm Base Diameter
#adStarrett #ad - Range: the jack has a 2-1/4" to 3-3/8" 57 to 85 mm range and a 1-1/4" 32 mm diameter base. Use for: the little giant tool jack is used for leveling and as a stabilizer for planer beds, upright drills, and other tools in machine shops.More information #ad
Product attachments are sold separately. Fine adjustment: The 20-pitch screw provides for fine adjustment. Jack only: sold as the jack only. Secure base: its serrated bed helps to effectively hold tools in place.Brand | Starrett #ad |
Manufacturer | Starrett #ad |
Height | 1 Inches |
Length | 1 Inches |
Weight | 0.34 Pounds |
Width | 1 Inches |
Part Number | 190A |
Model | 190A |
More information #ad
4. ROGTZ
#ad
ROGTZ Electric Hydraulic Car Jack Kit with Impact Wrench and Tire Inflator Pump, 5 Ton 12V Car Jack Hydraulic Car for SUV Sedans Tire Change with LED LightRed
#adROGTZ #ad - The electric car jack is capable of lifting carunder 5 ton up to reach its max heightheight range:5. 9~17. 7 inch within 2 minutes. The electric car jack must be used on a flat and firm ground Remember, inflator, power cord and accessories all come in a carrying case that easily fits the trunk of your vehicle, impact wrench, never to use it on a sloped ground!.Safe and secure to use:our electric hydraulic jack is will automatically stop working after reaching the height limit. The electric car jack head uses a non-slip design:a cross-shaped groove plus particles protruding from the surface to increase friction. The self-locking fully enclosed design, completely waterproof, no oil leakage, to ensure safety during use.4
More information #ad
4 in 1 electric hydraulic jack: the electric car jack must be used on a flat and firm ground! This 4 in 1 electric hydraulic jack comes in an electric hydraulic jack, an air pump and an impact wrench. Multi-function carrying case: the portable car jack, the red triangle warning sign can serve as a warning sign on the highway. Fits most vehicles:the electric jack kit 's two-way power supply battery clip with 12V DC power socket or car cigarette lighter allows any adult to change and repair tires at any time on the garage/highway, best choice for your car, truck or SUV. Notes for using elecric impact wrench: first: paying attention to the sizes when selecting the sleeve; Second: The signal "II" means loosening the screw, and you have to keep pressing "II" until the screw has been loosened. The signal"i" means tightening the screw, and you have to keep pressing "I" until the screw has been tightened.
Brand | ROGTZ #ad |
Manufacturer | ROGTZ #ad |
Height | 13 Inches |
Length | 14.2 Inches |
Weight | 15 Pounds |
Width | 7 Inches |
Part Number | 43241-43027 |
Model | TYGJ008 |
Warranty | Manufacturer warranty for 360 days from date of purchase |
More information #ad
5. Starrett
#ad
Starrett SF190 Little Giant Jack Screws Complete Set with Fine-Adjusting Screw and All Attachment
#adStarrett #ad - Auxiliary pointed screw can be used in place of the screw with a swivel cap. Additional extension base suitable for use on irregular surfaces; extension "V" base can be used against cylindrical form. Six-piece jack screw set can be used to level a workpiece on the table of a planer or drill press or in a machine shop.More information #ad
1" and 2" extension bases can be used in combination with jack screw to achieve maximum height of 6-3/8". 20-pitch jack screw measures 1-1/4" in diameter at the base and offers a height range of 2-1/4 to 3-3/8 inches.Brand | Starrett #ad |
Manufacturer | Starrett #ad |
Height | 2 Inches |
Length | 8.6 Inches |
Weight | 1 Pounds |
Width | 1.8 Inches |
Part Number | SF190 |
Model | SF190 |
More information #ad
6. RVGUARD
#ad
RVGUARD RV Stack Jacks 4 Pack with Storage Bag, Aluminum Stabilizer Jacks for RV Trailer Camper, Single Support Up to 6000 Lbs, Adjustable from 11" to 17"
#adRVGUARD #ad - Lightweight & portable these rv jack stands weight less than 40 lbs in total, when not use, and they come with a colorful organize bag; besides, they can be compact nested together for easy storage. Recommend placing wood or concrete blocks under jacks for better use.Height adjustablethe height of the rv stabilizing jack can extend from 11" to 17", they may not rise very high, thus are recommended to use for lower to the ground rigs for sure. Please note: These jacks are only for stabilization usage.
More information #ad
Do not use To Raise. Easy to usesimply position each stack jack stand underneath your RV, and spin the “T” shape handle to raise it to the proper height to reach appropriate leveling and stabilization. Make your rv stablethese rv stabilizer jacks are made of durable cast aluminum, anti-rust & corrosion resistant, each can support up to 6000lbs, with square base design, with which you needn’t to worry about your RV move or bounce anymore. What will you get4 pack rv stack jacks come with a colorful storage bag, great stabilization solution for your RV, which are ideal for stabilizing and leveling your RV, trailer and camper, etc.
Brand | RVGUARD #ad |
Manufacturer | RCGUARD #ad |
Weight | 7.72 Pounds |
Part Number | ARGSJ001 |
More information #ad
7. CFYUSEU
#ad
Black, CFYUSEU Scissor Lift Jack Max 3 Ton Capacity with Jack Socket Drill Adapter, QJD-3-1, Lifting Jack Car Kit with Wrench/Lug Wrench for Car SUV MPV
#adCFYUSEU #ad - Lift range & note: lifting range from 4. 1 inches to 17. 3 inches; maximum lifting weight: 3 tons. Includes: 1x 3 tons jack; 1x wrench; 1x Lug wrench;1x socket drill adapter; 2 x CR-V sockets; 1x carrying bag. The jack is only used as a tool for lifting the car, not as a tool for supporting the car.Part number: QJD-3. It will help you lift your vehicle more quickly with 2 handle tools. With lug wrench: the lift jack comes with 1 x telescoping lug wrench and 2xCR-V sockets17/19mm, 19/23mm to loosen or tighten the lug nuts.
More information #ad
Telescoping handle extends to 19 inches for maximum leverage. Come with 17mm socket drill adapter: the 3 tons jack will come with a 17mm/067inch socket drill adapter, reduces time and effort to raise or lower your scissor jacks, only takes about 5 seconds. Two way to handle: the scissor car lift jack comes with socket drill adapter and ratchet wrench to put the scissor jack up and down. Come with bag: with the carry bag, making your carrying more convenient and making the package more compact. 1 year warrnty, if you have any questions, please feel free to contact us. Included components: jack socket Drill Adapter, Lifting Jack Car Kit with Hand Crank/Wrench/Lug Wrench.
Brand | CFYUSEU #ad |
Manufacturer | chaofan #ad |
Weight | 9 Pounds |
Part Number | QJD-3 |
Model | QJD-3-1 |
Warranty | NO |
More information #ad
8. Pro-LifT
#ad
Pro-LifT T-9456 Grey Scissor Jack, 3000 lb. Capacity
#adPro-LifT #ad - Manufacturer: Pro-Lift. Extra wide base for extra capacity and stability. Fleet and Vehicle Maintenance. 3, 000 pound rated weight capacity scissor jack.More information #ad
Meets or exceeds the latest ANSI/PALD standards. Extra wide base for extra capacity and stability. Lifting range from 3-3/4 inches to 15-1/8 inches. Made in: China. Lifting range from 3-3/4 inches to 15-1/8 inches.Brand | Pro-LifT #ad |
Manufacturer | Pro-Lift #ad |
Height | 5.31 Inches |
Length | 17.72 Inches |
Weight | 8.8 Pounds |
Width | 4.13 Inches |
Part Number | T-9456 |
Model | T-9456 |
Warranty | Ninety (90) Day Limited Warranty |
More information #ad
9. K Tool International
#ad
Trolley 19 lbs & Stands 11 lbs; KTI63097A, K Tool International 2 Ton Capacity Trolley Jack & Jack Stands Set; Durable Steel Construction
#adK Tool International #ad - Durable - k tool trolley jack and jack stands are built for extra lifting and maneuverability for all load lifting needs. 53" saddle diameter 2" Front wheel size 2.Warranty - covered by a 1 year on material and workmanship. 6" weight 18. Capacity - k tool trolley jack and Jack stands are rated to hold up to 2 tons of weight or 4, 000lbs.
More information #ad
99" overall length 17. 6" rear caster wheel size 1. 31" raised height 12. 75", raised height 16. Trolley jack specs - low height 5. 89" x 6. 57" weight 11 lbs Pair. 87" handle length 16. 74 lbs. 72" overall width 7. Jack stand specs - low height 1073" base dimensions 6.Brand | K Tool International #ad |
Manufacturer | K Tool International #ad |
Part Number | KTI63097A |
More information #ad
10. Powerbuilt
#ad
640816, Powerbuilt 6 Piece Car Jack and Garage Creeper Service Set, 2 Ton Vehicle Lift, Folding Creeper, Wheel Chocks, Jackstands, Car Repair Garage Equipment
#adPowerbuilt #ad - Includes 36" floor creeper. Includes pair of 2 ton jack stands. Complete compact kit for fast tire changes, brake jobs and other car repairs. Includes 2 ton floor jack with 5-3/8" to 13" lift range.More information #ad
Includes: 2-ton jack, 2 jack stands, folding creeper and wheel chocks. Includes 2 wheel chocks. Meets or exceeds ANSI standards. Lifting range: 5-3/8 inch to 13 inch. Strong construction makes for a durable lift. Complete compact kit for tire changes and under-car repairs.Brand | Powerbuilt #ad |
Manufacturer | All Trade Tools #ad |
Height | 15.5 Inches |
Length | 12.63 Inches |
Weight | 42.72 Pounds |
Width | 19.5 Inches |
Part Number | 640816 |
Model | 640816 |
Warranty | 2 year manufacturer |
More information #ad