As an Amazon Associate I earn from qualifying purchases.

Incudes storage case: Comes with a convenient storage carrying case. High quality steel: combination of high-grade S2 steel bits and Chrome-Vanadium alloy steel sockets with mirror-polished chrome-plating that holds up job after job.

Visibility: highly visible and large stamped size markings are laser etched for easy reading when quickly selecting sockets on the job.


Includes 8-pc. 6-sided hexagonal tip is machined to precise tolerances for an exact fit with hex fasteners. Drive long inch hex bit sockets: 1/8, 5, 4, 7, 7/32, 9, 6, 5/16, 5.5
3/8 in. Sockets come organized in a sturdy case that features strong latches and clear, molded markings for each tool. Four detent grooves provide a secure connection with the drive tool and a drilled through-hole allows locking on with retaining pin. Beveled inner rim of the socket opening helps guide it smoothly onto fasteners. 3/8 in.

Drive hex bit sockets: 3, 7, 5, 4, 6, 9, 8, 4.5, 5. 5, 10 mm; Socket rail. 6-sided hexagonal tip is machined to precise tolerances for an exact fit with hex fasteners.

Organized in plastic rail set for easy carry and storage. Sand blasting finish protects bits from rust and corrosion. Chamfered ends allow smooth insertion onto fasteners and reduce damage of edges. It's recommended that you use one hand to hold plastic rail and the other hand to pinch the bottom of socket, pull out sockets vertically.
Powerful torqueheated treated premium chrome vanadium steel sockets provide superior torque for greater turning power. Meets and exceeds all ANSI specifications. Drop-forged for long lifespan and Chrome plated for rust-resistance. There is no need to rotate sockets left and right, apply force to the opposite direction of plastic rail, which may cause damage to plastic rail. Many sizes choice provide more convenience. Round corner design increases contact surface with ratchet wrench to get tighter connection.



Laser marking high-contrast size marking is permanently laser etched and easy to read, even in low light. It comes with 1 year quality guarantee. Premium cr-momade from premium impact grade chrome molybdenum steel with black phosphate finish.
1. Powerbuilt
#ad
Powerbuilt Hex Bit Socket Set, Ball End Sockets, Sizes 3-10mm, Storage Rail, 642405, 3/8 Inch Drive Metric, 8 Piece
#adPowerbuilt #ad - 8pc mm ball end hex bit socket. Made with precision and quality in mind. Built to exceed tool standards. Tool solutions for most all situations.More information #ad
Premium s2 alloy steel bits and chrome vanadium sockets. Includes 3, 4, 6, 7, 5, 8, 9 and 10mm hex bit sockets on a socket rail. Meets or exceeds ANSI standards. Highly durable. Lifetime warranty.Brand | Powerbuilt #ad |
Manufacturer | Powerbuilt #ad |
Height | 9.63 Inches |
Length | 1 Inches |
Weight | 0.85 Pounds |
Width | 3.88 Inches |
Part Number | 642405 |
Model | 642405 |
Warranty | 2 year manufacturer |
More information #ad
2. Neiko
#ad
Metric, Neiko 10076A 3/8-Inch Drive Extra Long Allen Hex Bit Socket Set, 3 mm, 10 mm | S2 and Cr-V Steel, 7-Piece Set
#adNeiko #ad - Highly visible: hex sockets feature laser-etched markings for easier and faster bit selection. Automotive applications: a high quality metric torque extension set that cuts the time in half when removing hard to reach and corroded hex nuts.Incudes storage case: Comes with a convenient storage carrying case. High quality steel: combination of high-grade S2 steel bits and Chrome-Vanadium alloy steel sockets with mirror-polished chrome-plating that holds up job after job.
More information #ad
Extra long set: includes extra-long set 110mm x 3, 7, 5, 6, 8, 4, and 10mm of hex bit sockets to access tight spaces such as European car suspensions.Brand | Neiko #ad |
Manufacturer | Ridgerock Tools Inc. #ad |
Height | 1.5 Inches |
Length | 7.6 Inches |
Weight | 1.4 Kilograms |
Width | 4.7 Inches |
Part Number | 10076A |
Model | 10076A |
More information #ad
3. Neiko
#ad
NEIKO 01141B Allen Bit Socket Set | 14 Piece | MM | 2.5mm to 19mm | 1/4", 3/8" and 1/2" Drive | Cr-Mo Impact Grade
#adNeiko #ad - Convenience: top quality, hard plastic organizing carrying case is portable and conveniently packs all tools for simple storage and organization. Pro quality: precisely machined black chrome molybdenum steel with one-piece construction provides excellent durability and strength with every impact movement.Visibility: highly visible and large stamped size markings are laser etched for easy reading when quickly selecting sockets on the job.
More information #ad
Design: individual pinhole base design adds extra security by placing in a locking pin for stability when exerting strong torque motion especially on automotive projects. Sizes 14 piece set includes: 1/4" drive - 2. 5, 12, 19mm, length 40mm 1/2" drive - 17, 9, 14mm, 8, 3, 6mm, 5.5, length 30mm 3/8" drive - 7, 5, 4, 10, length 60mm.Brand | Neiko #ad |
Manufacturer | Ridgerock Tools Inc. #ad |
Height | 1.89 Inches |
Length | 10.24 Inches |
Width | 5.12 Inches |
Part Number | 01141B |
Model | 01141B |
More information #ad
4. Sunex Tools
#ad
19mm, Cr-Mo Steel, SAE/Metric, 3/4 Inch, 3/8 Inch Drive Low Profile Impact Hex Driver Set, Heavy Duty Storage Case, Meets ANSI Standards, Sunex 3646, 6mm, 16-Piece, Dual Size Markings, 1/4 Inch
#adSunex Tools #ad - Dual size markings: Laser etched and roll stamped markings to ensure permanent identification. Heavy duty storage case: Convenient transport and storage. Solid one piece construction: Eliminates weak points and increases durability.More information #ad
Cr-mo steel: provides the strength and flexibility to handle high torque impact tools. Metric: 6mm to 19mm. 16 piece set. Sae: 1/4” to 3/4”. Meets ansi standards: All hex drivers are rigorously tested, ensuring peak performance and durability. Low profile design: Access tight spaces.Brand | Sunex Tools #ad |
Manufacturer | Sunex International #ad |
Height | 2 Inches |
Length | 8.72 Inches |
Weight | 0.03 Pounds |
Width | 3.9 Inches |
Part Number | 3646 |
Model | 3646 |
Warranty | Unconditional Lifetime |
More information #ad
5. TEKTON
#ad
TEKTON 3/8 Inch Drive Long Hex Bit Socket Set, 3-10 mm | SHB91303, 18-Piece 1/8-3/8 in
#adTEKTON #ad - Drive long metric hex bit sockets: 3, 10 mm; Storage case. S2 steel bit is press-fit into the socket for a straight, permanent connection that can't loosen over time. Extra-long bits allow you to reach deep into especially narrow, recessed areas.Includes 8-pc. 6-sided hexagonal tip is machined to precise tolerances for an exact fit with hex fasteners. Drive long inch hex bit sockets: 1/8, 5, 4, 7, 7/32, 9, 6, 5/16, 5.5
More information #ad
5, 3/16, 9/32, 4.5, 5/32, 1/4, 8, 3/8 in.10-pc. Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion. Large, clear die-stamped size marking is easy to read and can’t wear off. 3/8 in. Sockets come organized in a sturdy case that features strong latches and clear, molded markings for each tool. Four detent grooves provide a secure connection with the drive tool and a drilled through-hole allows locking on with retaining pin. Beveled inner rim of the socket opening helps guide it smoothly onto fasteners. 3/8 in.
Brand | TEKTON #ad |
Manufacturer | TEKTON #ad |
Height | 2.4 Inches |
Length | 10.7 Inches |
Weight | 3.5 Pounds |
Width | 6.6 Inches |
Part Number | SHB91303 |
Model | SHB91303 |
Warranty | No time limits, no receipts: tekton.com/tool-help |
More information #ad
6. TEKTON
#ad
10-Piece 3-10 mm | SHB91102, TEKTON 3/8 Inch Drive Hex Bit Socket Set
#adTEKTON #ad - S2 steel bit is press-fit into the socket for a straight, permanent connection that can't loosen over time. Includes 10-pc. Four detent grooves provide a secure connection with the drive tool and a drilled through-hole allows locking on with retaining pin.Drive hex bit sockets: 3, 7, 5, 4, 6, 9, 8, 4.5, 5. 5, 10 mm; Socket rail. 6-sided hexagonal tip is machined to precise tolerances for an exact fit with hex fasteners.
More information #ad
Beveled inner rim of the socket opening helps guide it smoothly onto fasteners. Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion. Large, clear die-stamped size marking is easy to read and can’t wear off. 3/8 in. Twist-to-lock socket rail organizes and securely holds sockets in place, both for in your toolbox and on the go.Brand | TEKTON #ad |
Manufacturer | TEKTON #ad |
Height | 2.4 Inches |
Length | 13.1 Inches |
Weight | 1.12 Pounds |
Width | 1.1 Inches |
Part Number | SHB91102 |
Model | SHB91102 |
Warranty | No time limits, no receipts: tekton.com/tool-help |
More information #ad
7. DURATECH
#ad
Allen Bit Sockets, Metric & SAE, Premium CR-V Socket and S2 Bits, DURATECH 21-Piece Bit Socket Set, 3/8'' Drive Torx
#adDURATECH #ad - Socket set include7-piece 3/8’’ drive torx bit socket set t15, t45, 7, 7/32, t40, t20, 5, 3/16, t50; 7-piece metric hex bit socket Set 3, t30, 6, 5/32, 8, 4, T25, 10mm; 7-piece sae hex bit socket set 1/8, 1/4, 5/16 and 3/8 inch. Conveniencesizes stamped markings and color grooves for easy identification.Organized in plastic rail set for easy carry and storage. Sand blasting finish protects bits from rust and corrosion. Chamfered ends allow smooth insertion onto fasteners and reduce damage of edges. It's recommended that you use one hand to hold plastic rail and the other hand to pinch the bottom of socket, pull out sockets vertically.
More information #ad
Applicationworks on cars, appliances, lawn equipment, trucks, machinery and other tasks requiring 3/8’’ Drive Hex or Torx/Star Torque bits sockets set. Powerful torqueheated treated premium chrome vanadium steel sockets provide superior torque for greater turning power. Meets and exceeds all ANSI specifications. Drop-forged for long lifespan and Chrome plated for rust-resistance. There is no need to rotate sockets left and right, apply force to the opposite direction of plastic rail, which may cause damage to plastic rail. Many sizes choice provide more convenience. Round corner design increases contact surface with ratchet wrench to get tighter connection.
Brand | DURATECH #ad |
Manufacturer | Hangzhou Great Star Industrial Co.,LTD. #ad |
Part Number | DTMTBSS21 |
More information #ad
8. Neiko
#ad
Neiko® 10243A 3/8” Drive Extra Long Ball End Hex Bit Socket Set, S2 Steel | 7-Piece Set | Metric 3mm to 10mm
#adNeiko #ad - Set includes a heavy duty storage case and 7 pcs 3/8 in. Precisely machined ball end ensures accurate tip size and allows access to fasteners from multiple angles to get around obstructions. Bits made from premium S2 alloy steel for superior hardness that reduces wear-out and insures longevity.More information #ad
4-1/4 inch 110mm extra long shaft extends reach to fasteners in deep and tight spots. High strength chrome vanadium sockets provide superior torque for greater turning power and mirror chrome finish for corrosion resistance. Drive metric hex bit sockets: 3, 6, 7, 4, 8, 5, 10mm.Brand | Neiko #ad |
Manufacturer | Neiko #ad |
Height | 7.4 Inches |
Length | 1.5 Inches |
Width | 4.6 Inches |
Part Number | 10243A |
Model | 10243A |
More information #ad
9. DEWALT
#ad
3/8" Drive, 17-Piece DWMT73806, SAE/Metric, DEWALT Drive Bit Socket Set
#adDEWALT #ad - DirectTorque Technology. Mechanic socket Set Comes with Lockable Stacking Cases. Removable internal Tray is Available with the Sockets Set.More information #ad
Hand stamped markings. Exceeds aNSI Specifications. Socket set 3/8 drive Has Durable Transparent Lid. Polished chrome vanadium finish. Knurled control ring. Full life Time Warranty.Brand | DEWALT #ad |
Manufacturer | Dewalt #ad |
Height | 15 Inches |
Length | 8 Inches |
Weight | 1.3 Pounds |
Width | 3 Inches |
Part Number | DWMT73806 |
Model | DWMT73806 |
Warranty | Limited Lifetime Warranty |
More information #ad
10. MIXPOWER
#ad
Cr-Mo Impact Grade, MIXPOWER 14-Piece Dr. Bit Socket Set, 1/4", Hex Bit Socket, 2.5mm to 19mm, Metric, 3/8" and 1/2" Drive
#adMIXPOWER #ad - Set includes14 piece set includes: 1/4" drive - 2. 5, 6mm, 5. 5, 12, 14mm, 10, 3, 19mm, 4, length 40mm 1/2" drive - 17, 8, 9, length 30mm 3/8" drive - 7, 5, length 60mm.Laser marking high-contrast size marking is permanently laser etched and easy to read, even in low light. It comes with 1 year quality guarantee. Premium cr-momade from premium impact grade chrome molybdenum steel with black phosphate finish.
More information #ad
Service guaranteeall mixpower tools meet or exceed ANSI performance standards. Designthe separate pinhole base design adds additional safety, placing it when the locking pin is stable and exerting strong torque for movement, especially in automotive projects.Brand | MIXPOWER #ad |
Manufacturer | MIXPOWER #ad |
Height | 2.17 Inches |
Length | 6.89 Inches |
Weight | 938 Grams |
Width | 5.24 Inches |
Part Number | MT063 |
More information #ad