Top 10 On Board Air Compressor for Truck – Automotive Replacement Electrical Equipment

As an Amazon Associate I earn from qualifying purchases.

1. Vixen Horns

 #ad

Vixen Horns 1.5 Gallon 5.6 Liter Train/Air Horn Tank with 200 PSI Compressor Onboard System/Kit 12V VXO8315

#ad
Vixen Horns #ad - 12 volt 200 psI Compressor. Precision Welded. Pressure gauge, pressure Switch, Air Hose and Mounting Hardware Included. Anti-corrosion Coating. Tank capacity: 1. 5 gallon 6 liter.
BrandVixen Horns #ad
ManufacturerVixen Horns #ad
Part NumberVXO8315

2. Air Lift

 #ad

AIR LIFT 25804 Air Shock Controller Kit

#ad
Air Lift #ad - Includes dash mount gauge panel and hardware and air line. Easy to install. Includes rugged on board air compressor. Universal connector for most air shocks including factory installed. Allows driver control for air shock pressure right from the driver seat.
BrandAir Lift #ad
ManufacturerAir Lift Company #ad
Height8 Inches
Length12.5 Inches
Weight3.7 Pounds
Width6.4 Inches
Part Number25804
Model25804

3. ARB

 #ad

Air Horn, Tire Inflator, ARB CKMTA12 '12V' On-Board Twin High Performance Air Compressor, Ideal for Air Lockers Locking Differentials, Air Tools and Pneumatic Tools.

#ad
ARB #ad - Size. 5- compressor pistons are equipped with a heavy duty European made cylindrical roller bearing. Over-pressure safety valve equipped. Equipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in case of a fault.

Note: air locker manifold Kit #171503 required to mount solenoids. 2- compact twin motor, dual cylinder design makes it the highest flowing compressor in its class voltage vs. 3- full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids. Highest air flow rate of any 12V compressor of its size on the market at 174LPM 6.

16cfm. Hard-anodized cylinder bores and PTFE Teflon impregnated carbon fibre piston seals for reduced friction and maximum trouble free life. 1- motors are water sealed, 100% ball bearing equipped i. E. 4- motors are internally thermal protected against extreme temperature damage. No bushings, and feature a unique linear brush pre-load system for extra long life, low heat and quiet operation throughout the life of the unit.
BrandARB #ad
ManufacturerARB #ad
Height4.72 Inches
Length19.69 Inches
Weight0.1 Pounds
Width10.24 Inches
Part NumberCKMTA12
ModelCKMTA12

4. Vixen Horns

 #ad

Vixen Horns Heavy Duty Onboard Air Compressor 200 PSI. Universal Replacement for Truck/Car Train Horn/Suspension/Ride/Bag kit/System. Fits All 12v Vehicles Like Semi/Pickup Trucks/Jeep VXC8301

#ad
Vixen Horns #ad - Flow rate: 1. 7cfm @ 0 PSI. Duty cycle: 100% @ 100 PSI. Amperage Draw: 23A. Maximum working Pressure: 200 PSI. 12v permanent Magnetic Motor.
BrandVixen Horns #ad
ManufacturerVixen Horns #ad
Weight9.26 Pounds
Part NumberVXC8301

5. Vixen Air

 #ad

Vixen Air Suspension Kit for Truck/Car Bag/Air Ride/Spring. On Board System- 200psi Compressor, 3 Gallon Tank. for Boat Lift,Towing,Lowering,Leveling Bags,Onboard Train Horn,Semi/SUV VXO4831B

#ad
Vixen Air #ad - Anti-corrosion Coating. Remote filter, drain valve, pressure switch, Relay with Pre-wired Plug and Mounting Hardware Included.12 volt 200 psi compressor Black with Remote Filter. Precision Welded. Tank capacity: 3 gallon 12 liter.
BrandVixen Air #ad
ManufacturerVixen Air #ad
Weight23 Pounds
Part NumberVXO4831B

6. VIAIR

 #ad

10007, VIAIR Constant Duty Onboard Air System

#ad
VIAIR #ad - Intended for inflation of tires up to 37 inches. Please check the manufacturer's website for a wiring diagram. Comes with a viair 450c air compressor and a 110 to 145 PSI Pressure switch.

Can inflate four tires up to 37 inches in diameter. Designed for uninterrupted use for up to an hour! at 72 degrees ambient temperature One year manufacturer's defect warranty included with copy of the receipt. 150 psi maximum working pressure and 100% duty cycle at 100 PSI; 20feet 12-Gauge Wire with Inline Fuse Holder. Ingress protection Rating: IP67. Designed to be installed and mounted onto the vehicle. Includes all parts needed for installation of you very own onboard air solution for tire maintenance and small pneumatic tools.
BrandVIAIR #ad
ManufacturerViair Corporation #ad
Height10 Inches
Length26.5 Inches
Weight9.5 Pounds
Width14.5 Inches
Part Number10007
Model10007
WarrantyAll VIAIR products come with a One Year Manufacturer Defect Warranty

7. Air Lift

 #ad

AIR LIFT 25592 Load Controller II On Board Air Compressor System

#ad
Air Lift #ad - The easy-to-read pressure gauge allows for on-the-go adjustments, dual needles, with one gauge, and a simple inflate and deflate button. Includes compressor and gauge and wiring harness. Economically priced on board air compressor system. Low pressure sensor automatically activates compressor if pressure drops. Perfect for light or medium duty applications for air springs. Single path system inflates two air springs at the same rate at the same time.
BrandAir Lift #ad
ManufacturerAir Lift Company #ad
Height8 Inches
Length12.5 Inches
Weight4.5 Pounds
Width6.4 Inches
Part Number25592
Model25592
WarrantyOne Year Limited Warranty

8. Vixen Air

 #ad

5 Gallon Tank. for Boat Lift,Towing,Lowering,Leveling Bags,Onboard Train Horn,Semi/SUV VXO4852BF, Vixen Air Suspension Kit for Truck/Car Bag/Air Ride/Spring. On Board System- 200psi Compressor

#ad
Vixen Air #ad - Tank capacity: 5 gallon 18 liter. Remote filter, pressure Switch, Water Trap with Coupling. Anti-corrosion Coating. Drain valve, relay with Pre-wired Plug and Mounting Hardware Included. 12 volt 200 psi compressor Black with Remote Filter.
BrandVixen Air #ad
ManufacturerVixen Air #ad
Part NumberVXO4852BF

9. Vixen Horns

 #ad

Vixen Horns Heavy Duty Onboard Air Compressor 150 PSI. Universal Replacement for Truck/Car Train Horn/Suspension/Ride/Bag kit/System. Fits All 12v Vehicles Like Semi/Pickup Trucks/Jeep VXC8801

#ad
Vixen Horns #ad - 12v permanent Magnetic Motor. Flow rate: 1. 9cfm @ 0 PSI. Amperage Draw: 20A. Duty cycle: 25% @ 100 PSI. Maximum working Pressure: 150 PSI.
BrandVixen Horns #ad
ManufacturerVixen Horns #ad
Part NumberVXC8801

10. VIAIR

 #ad

VIAIR 150 PSI High-Flow Air Source Kit

#ad
VIAIR #ad - Designed as an onboard air solution for actuate air horns. Includes pre-installed parts which is as follows, 110/145 PSI automatic pressure switch, drain cock, pressure safety release valve and 1/2 inch air-out compression fitting. Product must be mounted rightside up and drained from moisture after use. Replaceable/relocatable air filter element for harsh environments. Sealed compressor, relocate air filter if operating in outside environment. 150 psi maximum working pressure.
BrandVIAIR #ad
ManufacturerViair Corporation #ad
Height13.7 Inches
Length18.9 Inches
Weight19.75 Pounds
Width5.9 Inches
Part Number20005
Model20005
WarrantyOne year, manufacture's defect warranty covers defects in workmanship and materials only. For more information, please visit: http://www.viaircorp.com/warranty

Tags: