As an Amazon Associate I earn from qualifying purchases.
Eyourlife #ad - 4 modes control: the wiring harness kit has four mode controls: Switch on, switch off, fast and slow strobe flash. Universal fit: compatible with all automobiles, boats and devices equipped with a 12V power source.
Wireless remote control: our remote switch design will improve your installation experience. You need not to organize cables from car battery to cab for no manual switch equipped.
LEADTOPS #ad - Power switch relay wiring harness: easy install and will protect your led light bar; It is universal suitable for led work light, led light bar, HID and Halogen lights any 7" 10" 12" 20" 30" 40" 50"52"light bars that is within 300w.
Leadtops switch relay: every light bar need one wiring harness, Eyourlife Power Switch Relay Wiring Harness IP56 Waterproof Illuminated On/Off Rocker Switch. Operating voltage: 12v-24v amp: 40a power relay Fuse: 40A Blade Fuse.
Jhe #ad - This control box is waterproof. It's very safe. The control box needs to be installed in an appropriate position, otherwise it will affect the wireless signal reception. Can be used for all led light bar / off Road Lights / FOG Light / Driving Light, etc.
Easy to install. No drilling, saving money and convenience. After installation, no modification. Connect the right length of wire according to the position of the lamp, the remote control switch can control the LED light within 100 feet.
Fits most car, suv, jeep, pickup, off, zig-zag flash, 4x4, etc. Our product is guaranteed for 12 months. Please support our products. Innovative design: perfect led light remote switch control system, you want to do flash/strobe light. Create your own wireless remote control system based on the wiring diagram. The installation is simple.
QDY #ad - Packing! 12ft remote wiring harness kit, 12-month warranty. Remote!this is remote wiring harness kit, easy to install and remote control. Universal! compatible with all automobiles and devices equipped with a 10-30 Volt DC power source.
STDYSUN #ad - Durable: made of high quality copper, silicon infused wire, durable and waterproof. Dc24v need to replace the relay. The product can be directly connected to the battery to ensure that the power supply line of the original car is not damaged.
Easy to install: remote wiring harness kit for led bar lights, easy to install, easy DIY. It can be suitable for the light 10W~300W led work light bar. With absolutely nothing to worry about, If there is any problem with our product, please contact us and leave us message; 24 hours online service.
Buy with confidence : we offer you 12 months full warranty as well as lifetime customer support and excellent after-sale service. Safe and reliable: remote wiring harness kit are equipped with relays and high current fuses, which are more safe and reliable. Longer lifespan: switch, relays and fuse included, the switching relay is rated to 40A, routine use recommend DC12V will have a longer lifespan.
Northpole Light #ad - Easy to install: it is 1 lead that with one light output connection, compatible with all vehicles or boats that use a 12V DC power source, and suitable for all LED light bars and work lights.
It is universal fit for led work lights, 4" 10" 12" 20" 30" 40" 50" light bars within 300W. Operating voltage: 12v 40a power relay and 30a blade fuse.
Lumitek #ad - Universal fit: plug and play, compatible with all automobiles, boats and devices equipped with a 12V power source. 2 wiring leads: simultaneously connect 2 LED work lights or 2 small watt LED light bar within 180W.
Lumitek #ad - The wiring harness for led off road lights is the perfect accessory for off road vehicles, working vehicles, and any automobile that could use a relay to power specific equipment. The length of this wire harnesses will allow you to mount your LED light to nearly anywhere you want.
Jhe #ad - Our product is guaranteed for 12 months. Innovative design: perfect led light wireless remote control system, you want to do flash/strobe light. Create your own wireless remote control system based on the wiring diagram.
The installation is simple. The old version of the manual is wrong, please refer to the latest manual of the product link to install or ask for help from the store customer service! Thanks. If you have any questions, please contact the store customer service! Please support our products.
The maximum support current is 50A. This control box is waterproof. It's very safe. The control box needs to be installed in an appropriate position, otherwise it will affect the wireless signal reception. Can be used for all led light bar / off Road Lights / FOG Light / Driving Light, etc. The maximum power is 350W. Suitable for most cars. Easy to install. No drilling, no modification.
RACBOX #ad - Easy to install: the signal receiver box have 3 pin male and female connector, just plug & play if your wiring harness have the same connectors. Multiple functions: switch on, fast flash pattern3-4 flashes per second, switch off, slow flash pattern1-2 flashes per second.
If not it comes with connectors that you can attach yourself. Long control range: the remote control distance is more than 100 feets30 meters, vary depending on mounting location and circumstance.
Designed for led light bar: perfect for led light bar modules or leD light system you want to make flash / strobe. I would suggest buying the same connectors that your light bar has if there not the same as the receiver and make your own adapters so you don't have to cut you wire harness. The number of the lights controlled depends on the wire harness, one lead one or one lead two.
1. Eyourlife
#adEyourlife Wiring Harness, Universal Fit for Driving Fog Light Work Light1 Lead, Heavy Duty 300W 9ft Led Light Bar Wireless Harness Kit with Remote Control ON/Off Strobe Switch
#adWireless remote control: our remote switch design will improve your installation experience. You need not to organize cables from car battery to cab for no manual switch equipped.
More information #ad
Over 180ft control distance: wide range of control distance makes control the LED light bar more effective, but the distance will depend on different mounting location and environment. Package include 1x wiring Harness，1 X Flash Remote Control Kit. Service guarantee: we stand behind our products 100% with a 12-month warranty.| Brand | Eyourlife #ad |
| Manufacturer | Eyourlife #ad |
| Part Number | 709202601373 |
| Model | 7.09203E+11 |
| Warranty | 2 Years |
More information #ad
2. LEADTOPS
#adLEADTOPS Heavy Duty LED Light Bar 400Watts Load Wiring Harness Wireless Strobe Wiring Kit ON-Off-Strobe RF Remote Control Switch for Work Light Driving Light,2 Years Warranty
#adLeadtops switch relay: every light bar need one wiring harness, Eyourlife Power Switch Relay Wiring Harness IP56 Waterproof Illuminated On/Off Rocker Switch. Operating voltage: 12v-24v amp: 40a power relay Fuse: 40A Blade Fuse.
More information #ad
400w. Buyer guarantee - we stand behind our products 100% with a 12-month warranty. We do offer a 30-day money-back guarantee on all orders to allow you to test the LEADTOPS’s products in your daily life. Leadtops security harness: leadtops relay will regulate the power to be consistent and prevent any surge, it also comes with a pre-installed inline fuse as well as Switch.| Brand | LEADTOPS #ad |
| Manufacturer | LEADTOPS #ad |
| Height | 3.54 Inches |
| Length | 7.48 Inches |
| Weight | 0.88 Pounds |
| Width | 3.54 Inches |
| Part Number | LEADTOPS-11 |
| Model | LEADTOPS-11 |
More information #ad
3. Jhe
#ad16AWG, LED Light Bar Remote Control Wiring Harness,Jihe Wireless Remote Control Wiring Harness Kit for LED Light Bar /Driving Light/Fog Light/Pod Light/Work Light
#adEasy to install. No drilling, saving money and convenience. After installation, no modification. Connect the right length of wire according to the position of the lamp, the remote control switch can control the LED light within 100 feet.
More information #ad
Multiple functions: on, truck, strobe, pulsing. The remote switch has seven control modes to control the led light bar. Fits most car, suv, jeep, pickup, off, zig-zag flash, 4x4, etc. Our product is guaranteed for 12 months. Please support our products. Innovative design: perfect led light remote switch control system, you want to do flash/strobe light. Create your own wireless remote control system based on the wiring diagram. The installation is simple.
| Brand | Jhe #ad |
| Manufacturer | JIHE #ad |
| Part Number | JH-G274+031 |
| Model | JH-G274+031 |
More information #ad
4. QDY
#adQDY Remote Wiring Harness for Led Light Bar with 12V 40A One Line Kit ON/OFF Switch Relay for Work Lights Off Road Fog Driving LightsRemote Control
#adMore information #ad
Durable! made of high quality Copper, silicon infused wire, durable and Waterproof. Longer! 12ft wire from battery to light fixture. You mount lights anywhere you want.| Brand | QDY #ad |
| Manufacturer | QDY #ad |
| Weight | 1 Pounds |
| Part Number | QDY |
More information #ad
5. STDYSUN
#adLED Work Lights Bar Remote Wiring Harness Kit 1 Leads DC12V 40A LED Lights Remote Wiring Harness Switch Relay 14AWG Core Cable Harness Fit for Car Fog Lights Work Driving Lights Bar
#adEasy to install: remote wiring harness kit for led bar lights, easy to install, easy DIY. It can be suitable for the light 10W~300W led work light bar. With absolutely nothing to worry about, If there is any problem with our product, please contact us and leave us message; 24 hours online service.
More information #ad
Wide application: professionally assembled wiring loom kit suitable for 12V HID, offroad spot lights, work lights, 12V LED driving lights, 12Vhalogen, offroad lights bar, fog lights, replacement fog lamps add-on fog lights hid lights etc. Buy with confidence : we offer you 12 months full warranty as well as lifetime customer support and excellent after-sale service. Safe and reliable: remote wiring harness kit are equipped with relays and high current fuses, which are more safe and reliable. Longer lifespan: switch, relays and fuse included, the switching relay is rated to 40A, routine use recommend DC12V will have a longer lifespan.
| Brand | STDYSUN #ad |
| Manufacturer | STDYSUN-Maker #ad |
| Part Number | XS-PU-YK |
| Model | 1 Leads with Remote Control |
More information #ad
6. Northpole Light
#ad40A Fuse Remote On Off Switch Relay Wiring Harness for LED Work Lights Driving fog lights, Northpole Light Remote Control Wiring Harness for LED Light Bar
#adIt is universal fit for led work lights, 4" 10" 12" 20" 30" 40" 50" light bars within 300W. Operating voltage: 12v 40a power relay and 30a blade fuse.
More information #ad
4 model remote control switch: oN/ OF/Quick Flashing/ Slow Flashing. Please make sure your light within power 300W. High quality: heavy duty14 AWG copper wire, waterproof wiring harness, ideal for outdoor use. We recommend professional installation and suggest that wrap all exposed wire with electrical tape to avoid a short circuit.| Brand | Northpole Light #ad |
| Manufacturer | Northpole Light #ad |
| Weight | 1.01 Pounds |
| Part Number | RC-HS-HIGH |
| Model | RC-HS-HIGH |
More information #ad
7. Lumitek
#adLumitek Universal LED Light Bar Remote Wiring Harness Kit with 40A/12V ON/OFF Switch Relay for Off Road Driving Lights Fog Lights…
#adMore information #ad
Wiring harness kit with on/ off switch at the length of 3m, plenty of length to put it where you want. Package include: 1x wiring Harness，1 X Flash Remote Control Kit. Detail:operating voltage: 12v, power relay Fuse: 40A, amp: 40a, Blade Fuse: ≤180W.| Brand | Lumitek #ad |
| Manufacturer | Lumitek #ad |
| Part Number | Lu-rc-hs-low-1 |
More information #ad
8. Lumitek
#adLed Light Bar Lumitek Remote Control Wiring Harness Kit 40A 12V ON / Off Switch Relay for Driving Lights Fog Lights Bar…
#adMore information #ad
Just run the harness from the battery to your desired lighting location. 4 modes remote control switch: oN/ OF/Quick Flashing/ Slow Flashing. Package includes: 1x Remote Control Wiring Harness & Switch Kit. Max rated at 30a, 40a power relay, 30a blade Fuse; Suitable for LED light bars within power 300W.| Brand | Lumitek #ad |
| Manufacturer | Lumitek #ad |
| Height | 3 Inches |
| Length | 6 Inches |
| Weight | 0.5 Pounds |
| Width | 2.5 Inches |
| Part Number | Lumitek 11 |
| Model | 4333220755 |
More information #ad
9. Jhe
#adLED Light Bar Remote Wiring Harness / Wireless Remote Wiring Harness for LED Light Bar / Driving Light / Fog Light / Pods Light / Work Light , Supported Current is 30A,Support Power is 300W
#adThe installation is simple. The old version of the manual is wrong, please refer to the latest manual of the product link to install or ask for help from the store customer service! Thanks. If you have any questions, please contact the store customer service! Please support our products.
More information #ad
Multiple functions: on, strobe, off, zig-zag flash, pulsing. The wireless remote has seven control modes to control the led light bar. The maximum support current is 50A. This control box is waterproof. It's very safe. The control box needs to be installed in an appropriate position, otherwise it will affect the wireless signal reception. Can be used for all led light bar / off Road Lights / FOG Light / Driving Light, etc. The maximum power is 350W. Suitable for most cars. Easy to install. No drilling, no modification.
| Brand | Jhe #ad |
| Manufacturer | JIHE #ad |
| Part Number | JH-US-G235 |
| Model | JH-US-G235 |
More information #ad
10. RACBOX
#adRACBOX LED Light Bar Wireless Remote Control Switch On/Off Strobe Flash for Bar Light Work Light Wiring Harness
#adIf not it comes with connectors that you can attach yourself. Long control range: the remote control distance is more than 100 feets30 meters, vary depending on mounting location and circumstance.
More information #ad
Built-in powerful battery: grade A cells 27A Ensure Longer Battery Life and Long Lasting Power. The remote control is used with the wire harness. Designed for led light bar: perfect for led light bar modules or leD light system you want to make flash / strobe. I would suggest buying the same connectors that your light bar has if there not the same as the receiver and make your own adapters so you don't have to cut you wire harness. The number of the lights controlled depends on the wire harness, one lead one or one lead two.
| Brand | RACBOX #ad |
| Manufacturer | DR #ad |
| Part Number | ASSCT_01 |
| Model | ASSCT_01 |
More information #ad
