Top 10 Shock Absorber Tool Kit – Suspension Tools

As an Amazon Associate I earn from qualifying purchases.

1. UTMALL

#ad

UTMALL 18PCS Steering Hub Suspension Shock Absorber Strut Nut Removal Tool Socket Kit

#adUTMALL #ad - Go-through ratchet:21mm go-through 82mm deep sockets:16, 22, 17, 18, 21, 19, 24mm. Extensions:female hex; 7, male hex; 6, 6 x 8, 8mm, 9mm, slotted: 5 x 8, 7, 8, 7.1 x 9. 6mm, trx-star*; T50 To be used in conjunction with a 1/2"Sq drive ratchet or T-bar not included. Permits the removal of the top suspension nut by holding the strut piston, so it doesn’t rotate while turning the nut. The go-through design of the socket and ratchet allows the extension to pass through the middle.

Brand	UTMALL #ad
Manufacturer	YOUTU AUTOMOTIVE PRODUCTS #ad
Weight	7.72 Pounds
Part Number	UT17040201
Model	UT17040201

2. WINMAX TOOLS AUTOMOTIVE

#ad

39pc Strut Shock Installation Tool Kit Removal Nut Socket Set Absorber's Top Lid

#adWINMAX TOOLS AUTOMOTIVE #ad - Size:105x3. 5mm 12. 5x3. 5mm 14. 5x5mm 14. 5x3mm 14x2. 5mm 14mm 16mm 17mm 18mm 19mm 21mm 22mm 24mm 27mm 3mm, 3. 5mm, 4mm 5mm 5. 2mm 6mm 6. 3mm 7mm 8mm 9mm 10mm 11mm 12mm d5 d10 M12 T50 T60 .

Brand	WINMAX TOOLS AUTOMOTIVE #ad
Manufacturer	WT04B2079 #ad

3. Steelman

#ad

STEELMAN 78554 39-Piece Strut/Shock Installation Tool Kit

#adSteelman #ad - Kit is has the necessary sockets and adapters for clamping the piston rod when removing and installing the shock absorber. Precise torque can be attained when tightening the shock absorber piston rods. Kit provides comprehensive coverage for most European, Asian and domestic vehicles. Use for repairs and maintenance on front suspensions struts and shocks. Kit contains 14 sockets and 25 adapters with a complete application chart included.

Brand	Steelman #ad
Manufacturer	Steelman #ad
Height	3 Inches
Length	23 Inches
Weight	13.7 Pounds
Width	16 Inches
Part Number	78554
Model	78554
Warranty	Limited Lifetime Warranty

4. CTA Tools

#ad

15 Pc., CTA Tools 7466 Shock and Strut Service Kit

#adCTA Tools #ad - Includes: 82mm deep sockets sizes: 16, 17, 6, 21, 18, sliding t-bar, 7 & 24mm. Allows for proper torque to be applied to the top nut. Constructed of Chrome Vanadium. 3 hex bits: 5, 19, 21mm go-through ratchet and 2 slotted Double-D sockets: 5 x 8 & 8mm, 22 & 6 x 8. Visit ctatools for application details. Addresses the most common issue of tightening the top mount nut while holding the strut.

Brand	CTA Tools #ad
Manufacturer	CTA Tools #ad
Weight	7 Pounds
Part Number	7466
Model	7466
Warranty	See Manufacturer Website

5. Kei Project

#ad

Small, Kei Project Universal Coilover Adjustment Spanner Wrench Set, and Large Spanners, 4 Pc. Tool Kit for Suspension System and Shock Adjustments, Medium

#adKei Project #ad - 3/8 drive Hole. Universal vehicle support – the small, medium, and large shock wrench spanner set makes it easier to fit most stock and aftermarket shock suspensions and coilovers.

Powder-coated steel – this shock spanner wrench set is made with rust-resistant, high-quality steel to give it ideal strength, balance, and flex for heavy pulls or turns. Slip-resistant grip – far easier to grab than standard spanner wrenches these boast a rubberized grip to reduce hand tension and give you more control over projects. Hook spanner wrench set – for dIY car enthusiasts and professional mechanics our coilover spanner wrench set supports most coilover shock replacements.

Brand	Kei Project #ad
Manufacturer	Kei Project #ad
Part Number	547725
Model	547725

6. BTSHUB

#ad

BTSHUB 18pc Steering Hub Suspension Shock Absorber Strut Nut Removal Tool Socket Kit

#adBTSHUB #ad - Specifically designed for repairing and replacing shock absorbers and struts Permits the removal of the top suspension nut by holding the strut piston, so it doesn’t rotate while turning the nut. The go-through design of the socket and ratchet allows the extension to pass through the middle. To be used in conjunction with a 1/2"Sq drive ratchet or T-bar not included. Go-through ratchet: 21mm go-through 82mm deep sockets:16, 21, 17, 22, 18, 19, 24mm. Extensions: female hex; 7, 7. 1 x 9. 6mm, 8, 7, 6 x 8, 9mm, 8mm, slotted: 5 x 8, male Hex; 6, TRX-Star*; T50.

Brand	BTSHUB #ad
Manufacturer	Ruichen #ad
Height	3.94 Inches
Length	7.87 Inches
Width	3.15 Inches
Part Number	BT0120

7. dynofit

#ad

Set of 2 21mm Socket 1/2" Drive Safe Universal Set/Kit for Struct Spacer Assembly/Lift Kit/Shock Installation, dynofit Solid Coil Spring Compressor Tool

#addynofit #ad - Strong:constructed of nice quality materialsupdated-impact gun is not recommended due to safety but can be used if needed. Tightening end:as well as a half inch square drive1/2" ratchet hole you can use a 7/8 inch socket.

Nice safety feature:little pins that keep the compressor from flying off the coil spring. Fitment: universal for small, as full sized truck or heavy duty owner, not fit very thick wireOD>5/8inch, medium and most thick coil spring, you'd better check this OD. Locks it onto the spring so it can't come off until you pull it back. No instruction included. Package: the included case is great for storage and keeping them clean, free from dust and cobwebs.

Brand	dynofit #ad
Manufacturer	fastfree #ad
Part Number	FF-RT003

8. Pacific Customs

#ad

Wrenches, and Shaft Bullets, Pacific Customs Fox Shock Rebuild Tool Kit with Nitrogen Fill Kit

#adPacific Customs #ad - 6 inch adjustable Face Spanner Wrench. Shaft bullet for 5/8 and 7/8 Diameter Shaft. Kit includes:. Nitrogen Shock Fill Kit. T handle hex Key Wrench.

Brand	Pacific Customs #ad
Manufacturer	Pacific Customs #ad
Weight	1 Pounds
Part Number	foxshocktoolkit

9. Powerbuilt

#ad

648603, Foreign and Domestic, Shock Absorbers, 5 Piece, Remove Straight or Curved Coil Springs, Powerbuilt Coil Spring Compressor Tool Kit, Storage Case

#adPowerbuilt #ad - Assists in removal and installation of front shock absorber springs and nuts on many US made vehicles. Made to be the most reliable tools in the market today. Tool solutions for most all situations. Works on "double D" shape shock shaft stems. Carry case includes usage photos and instructions. Built to exceed tool standards.

Brand	Powerbuilt #ad
Manufacturer	Alltrade Tools #ad
Height	10.38 Inches
Length	2.88 Inches
Weight	5.2 Pounds
Width	12.88 Inches
Part Number	648603
Model	648603

10. Pit Posse

#ad

Pit Posse Nitrogen Needle Kit with Needle Head for shocks| Compatible with Fox, UTV, RZR, Snowmobile, Ohlins

#adPit Posse #ad - Kit includes needle and hose fitting. Nitrogen needle is used to fill shocks with self-sealing rubber valve Compatible with some Yamaha, Fox and Ohlins.

Brand	Pit Posse #ad
Manufacturer	Pit Posse #ad
Height	1 Inches
Length	7 Inches
Weight	0.08 Pounds
Width	4 Inches
Part Number	PP3305