Top 10 Steering Shaft Joint – Automotive Replacement Universal Joints

As an Amazon Associate I earn from qualifying purchases.

1. AA Ignition

#ad

Replaces 8L3Z-3B676-B, Compatible with Ford F-150 2004-2008 and Lincoln Mark LT 2006-2008, 4L3Z3B676DA, 7L3Z3B676A, Lower Column Joints, Intermediate Steering Shaft with U Joint Coupler

#ad
AA Ignition #ad - It is considered unsafe to drive with a bad steering shaft on your vehicle and may put other people's lives with you at risk as well. The universal joint or also called as u-joint at the end of the steering shaft connects to the steering gearbox which has another u-joint that connects to the steering wheel allows for the angles between them to be supported resulting to your vehicle wheels smooth and easy turning.

Oem fit, finish - while this is not a genuine oem part, Quality, it is a direct replacement and will fit, work and function like the original part. Save time and money off of dealer prices by purchasing this part and take advantage of our lifetime warranty. Lifetime warranty - this replacement intermediate shaft with ujoint coupler from aa ignition comes complete with a lifetime warranty. Replacement intermediate steering shaft - keeps the steering gearbox and steering wheel connected. Compatible replacement for ford & lincoln trucks - 2004, 2007, 2005, 2008 mark lt | the intermediate steering shaft can easily be located inside the engine bay connected to the steering column which is on the driver side of the vehicle.

Replaces part# 8l3z-3b676-b, 7l3z3b676a, 5l3z3b676aa, 425-361, 8l3z3b676b, 536472, 4l3z3b676da, 8l3z3b676a, 425361. This replacement intermediate steering shaft with universal joint is manufactured from high quality steel to ensure longevity providing excellent value at the cheapest price possible. The intermediate steering shaft is an important component of your vehicle. If you are experiencing strange sounds, loose steering wheel tilt, 2007, 2006, 2008 F150 | 2006, difficulty in turning or your steering wheel does not go back to the center after turning then you may have a problem with your intermediate steering shaft.
BrandAA Ignition #ad
ManufacturerAA Ignition #ad
Part Number8L3Z-3B676-BAA
WarrantyLifetime Warranty

2. Allstar

#ad

3/4-16 in Right Hand Male Thread, Kit, Spherical Rod End, Oversized, Steel, 3/4 in Steering Shaft, Allstar-ALL52132 Steering Shaft Support, Jam Nut

#ad
Allstar #ad - Mounts to steering column bracket to hold steering shaft in place. Steering shaft support, 3/4-16 in right hand male Thread, spherical rod end, Oversized, Steel, 3/4 in steering Shaft, Jam Nut, Kit. Product type :AUTO PART. Kit includes one rod end and two steel 3/4 " rh jam nuts.
BrandAllstar #ad
ManufacturerAllstar Performance #ad
Height15 Inches
Length84 Inches
Weight0.71 Pounds
Width48 Inches
Part NumberALL52132
ModelALL52132
Warranty90 days

3. Ensun

#ad

Ensun 3/4" Round x 3/4" Round Black Single Steering Shaft Universal U Joint Maximum Working Angle 35° Degree, Total Length 96mm 3-3/4"

#ad
Ensun #ad - Black oxidization for Corrosion Resistance. Maximum rotational / Operating Speed: 4000rpm. Application: grinding machines, Automated Partking Lifts, Automotive Parts, Levelers, Etc. Maximum working Angle: 35° Degree. Total length: 96mm 3-3/4".
BrandEnsun #ad
ManufacturerLiberty Auto Parts #ad
Part NumberSUJ003

4. Waooeafi

#ad

3/4"-36 Spline X 3/4" Round Steering Shaft U Joint Strong Forged Steel

#ad
Waooeafi #ad - They use a high quality needle bearing。. Have a working angle of up to 38 degrees. It has greased needle bearings for long life. This u-joint is used to connect a 3/4-36 spline piece of 3/4" Round. The fastener is designed for better attachment and upgraded safety. This auction is for a new forged steel steering u-joint. It is 3/4" smooth bore on one end and 3/4"-36 spline on the other. Brand new 3/4"-36 spline x 3/4" smooth forged steel universal steering Shaft U Joint Power.
BrandWaooeafi #ad
Part Number30305

5. Dorman

#ad

Dorman 425-302 Steering Shaft Universal Joint Compatible with Select Ford/Lincoln/Mercury Models

#ad
Dorman #ad - Durable materials - this shift boot is manufactured from quality materials for durability. Quality tested - this part has undergone extensive testing to ensure a quality fit and reliable performance. Ideal replacement - this steering shaft universal joint matches the fit and function of the original equipment joint for specific makes and models. Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool. Cost-effective solution - offers original equipment quality at competitive price.
BrandDorman #ad
ManufacturerDorman - OE Solutions #ad
Height3.07 Inches
Length4.53 Inches
Width3.14 Inches
Part Number425-302
Model425-302
WarrantyLimited Liftetime

6. WMPHE

#ad

WMPHE Single Steering Shaft Universal U Joint 3/4"-36 Spline x 3/4" DD 83mm 3-1/4" Working Angle 35°Degree

#ad
WMPHE #ad - Manufactured according to strict quality control standards, If you have any questions, please feel free to contact us, we will be happy to help you.

New and good materials, works as genuine parts, Easy to install. Specification: 3/4"-36 spline x 3/4" dd, working angle: 35°degree, total length: 83mm 3-1/4", Maximum Rotational/ Operating Speed: 4000rpm. Material: use good solid steel, Phosphating surface treatment, corrosion-resistant. For automotive parts compatible with single steering shaft jeep, rock crawler, and also perfect for Grinding Machines, muscle car, hot rod or sand rail, Levelers, etc. Street rod, suv, automated Partking Lifts, etc.
BrandWMPHE #ad
ManufacturerWMPHE #ad
Part NumberWMPHE-HH039

7. Ensun

#ad

Maximum Working Angle: 35° Degree, Ensun 3/4" DD x 3/4" DD Black Single Steering Shaft Universal U Joint, Total Length: 83mm 3-1/4"

#ad
Ensun #ad - Application: grinding machines, Automated Partking Lifts, Automotive Parts, Levelers, Etc. Maximum rotational / Operating Speed: 4000rpm. Material: high Quality Solid Billet Steel. Surface finish: Black Oxidization for Corrosion Resistance. Buy with confidence: order from Ensun, we offer a 2 Years Warranty, true worry-free shopping experience;.
BrandEnsun #ad
ManufacturerLiberty Auto Parts #ad
Part NumberSUJ009

8. Dorman

#ad

Dorman 425-358 Steering Shaft Universal Joint for Select Ford / Mazda / Mercury Models

#ad
Dorman #ad - Ideal replacement - this steering shaft universal joint matches the fit and function of the original equipment joint for specific makes and models. Quality tested - this part has undergone extensive testing to ensure a quality fit and reliable performance. Durable materials - this shift boot is manufactured from quality materials for durability. Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage. Cost-effective solution - offers original equipment quality at competitive price.
BrandDorman #ad
ManufacturerDorman - OE Solutions #ad
Height3 Inches
Length4.5 Inches
Weight0.5 Pounds
Width3 Inches
Part Number425-358
Model425-358
WarrantyLimited Lifetime Warranty

9. Cheriezing

#ad

Length 3-3/4 Inch, Cheriezing 3/4" Round x 3/4" Round Steering Universal Joint

#ad
Cheriezing #ad - Maximum working Angle: 35° Degree. Application: grinding machines, Automotive Parts, Automated Partking Lifts, Levelers, Etc. Maximum rotational / Operating Speed: 4000rpm. Total length: 96mm 3-3/4". Black oxidization for Corrosion Resistance.
BrandCheriezing #ad
ManufacturerGMbast Wepeak #ad
Part NumberUJ001

10. AUQDD

#ad

AUQDD Lower Steering Shaft w/U Joint Coupler Fit for 04 05 06 07 08 Fo-rd F-150 06-08 Lincoln Mark LT Steering Column Replace # 425-361 8L3Z3B676B 8L3Z-3B676-B 4L3Z3B676DA 5L3Z3B676AA 7L3Z3B676A

#ad
AUQDD #ad - Cost-effective : we are a factory direct sales. Customers can spend a small amount of money and get high quality Brand new Intermediate Steering Shaft. Please note : before placing the order, please check your car model in the Amazon Fitment Filter System in the top left corner, do not count on year make and model only, view compatability tab including the notes.

Precise fit : auqdd steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, Makes and models. Steering shaft function is to connect the steering wheel with the car's steering gear, makes it easy to turn your car wheels. Trustworthy performance : built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation.
BrandAUQDD #ad
ManufacturerAUQDD #ad
Height1.97 Inches
Length15.1 Inches
Weight3.4 Pounds
Width1.97 Inches
Part NumberZX-361
Model425-361