As an Amazon Associate I earn from qualifying purchases.

1. iBrightstar

#ad

Red Brake Stop Tail Running License LED Light Lamp for 12V Camper Truck RV Boat Snowmobile Marine Under 80", iBrightstar IP68 Waterproof Square Trailer Lights kit, DOT Compliant

#ad
iBrightstar #ad - Application: universal for trucks, boat, semi-trailer, special vehicle, dump Truck, trailers under 80", tractors, bus, etc. Any other problem please feel free to contact us, we are always here to satisfy of you.

Use ultrasonic welding technology to achieve IP68 Waterproof, it will prevent from any bad weather and diving with a Longer life span. Functions as stop tail Rear/ Side reflector Side Marker and License Illuminator on left. Super bright with high visibility safety lights, big difference between Low and High brightness, EASY TO INSTALL. Set of 2 pack high brightness diodes led combination with better heat distribution, designed for 12v system.
BrandiBrightstar #ad
ManufactureriBrightstar #ad
Part NumberiBrightstar-Square-Trailer-R
Model8542089223

2. Nilight

#ad

2 Years Warranty, Nilight TL-01 6" Oval Red LED Tail 2PCS w/Surface Mount Grommets Plugs IP65 Waterproof Stop Brake Turn Trailer Lights for RV Truck Jeep

#ad
Nilight #ad - Easy installation: the taillight comes with grommets for surface mount, also added a 3-prong watertight plug with attached wire. Upgraded unique design: neligh's tail light has unique “ears” on its two sides, and the 3-prong plug attaches tightly on the light. These help the light fit perfectly and firmly on the grommet, there will be no worries of loosing light or wires.

Hole size for surface mount is: 6. Ready for the weather: be highly silicon sealed, IP65 waterproof rating, always be ready for different kinds of weather attack. For installation, you just need to surface mount the grommets & light setup, and then connect the 3 wires to the corresponding wires on vehicles. Just make sure the hole size before your purchase. Shake proof, upgrade notches on the inside of grommet, and a tighter attaching ability between 3-prong plug and it.

Universal application: work on 12v dc system, dump Truck, function as turn/brake light, tail light for all kinds of trucks, semi-trailer, special vehicle, travel trailer, horse trailer, trailers, tractors, etc.75”. 6” x2. Awesome brightness: each tail light has 10pcs high-quality SMD LEDs to output super bright red light, low brightness for Tail light, high brightness for Turn/Brake light, improving visibility and ensuring you a safer night.5” x 1.
BrandNilight #ad
ManufacturerNilight #ad
Part NumberTL-01
ModelTL-01
Warranty2 Years Warranty

3. CZC AUTO

#ad

CZC AUTO 2PCS 12V LED Submersible Low Profile Rectangular Trailer Lights, Sealed for Boat Trailer Truck Marine, Tail Stop Turn Running Lights Kit

#ad
CZC AUTO #ad - Please note: any problem in using our submersible trailer tail lights, simply contact us, a reliable brand in trailer lights industry. Waterproof rater ip68. 18 gauge pure copper wires ensure trailer lights LED do good job underwater. It combines stop, running, turn signal indicator lighting and license plate illumination.

Excellent waterproof/submersible lights for trailer. All diodes are led, not incandescent bulbs! 100% quality inspection before shipping including photometric inspection. Czc auto multifunctional rectangular trailer tail light. You can also find wiring diagram on detail page. Further more, every possible gap is sealed well with glue like edge of the lens. Czc auto, 12-month warranty for quality-related issues. We offer 30-day money-back guarantee for any reason, your problem will be solved within 24 HOURS.

Package includes: 2 pcs submersible trailer lights, 1 bag mounting hardware and 1 installation instruction. Sonic welding whole Sealing Technology ensures sealing solidity of the LED tail lights. The marine led trailer lights have super high visibility and Longer Lifetime!The waterproof trailer tail lights comply with DOT standards which tested by US Lab. Please make sure no electronic short of the wires connecting before leting tail lights marine / underwater.
BrandCZC AUTO #ad
ManufacturerCZC AUTO #ad
Part Number101002W
Model8542119439

4. Nilight

#ad

Nilight 2PCS 16” 11 LED Red Trailer Light Bar for Park Stop Turn signals Tail Brake Light DOT Compliant IP65 Waterproof Truck Trailer Marker ID Bar, 2 Years Warranty

#ad
Nilight #ad - Easy wire connection for wire connection white wire for ground black wire for low brightness tail light and red wire for high brightness brake light. Wide application can be perfectly used on most 12v heavy duty trucks semi trailers cargo trailers boat trailers travel trailers horse trailers RV camper work vehicles etc Package Include 2PCS trailer marker ID bar with 2 hardware pack.

Multi-functions each light has 11 high quality LED outputs high brightness and low brightness Can functions perfectly as parking light stop light turn signal light tail light and brake light. Highly sealed & durable the front polycarbonate lens is sonically welded to the housing and the back wire lead is add on glue to make sure the light is completely sealed Waterproof enough to withstand all weather abuse! Light bar mounting to flush-mounting the light one option is to drill a center hole or use the existing hole to go through the back wire lead and then fix the two ends by drilling in the two screws provided The other option is to add some washer when fixing the two ends or use a bracket to mount the light to avoid drilling holes for the back wire lead.

BrandNilight #ad
ManufacturerNilight #ad
Weight0.57 Pounds
Part NumberTL-10
ModelTL-10
Warranty2 Years Warranty

5. CZC AUTO

#ad

CZC AUTO 12V Submersible LED Trailer Tail Light Kit for Under 80 Inch Trailer Boat Utility Trailer Waterproof Trailer Light kit

#ad
CZC AUTO #ad - Please note: any problem in using our Submersible trailer tail lights, your problem will be solved within 24 HOURS. 2 optional mounting ways, you can mount on the back or the side of the trailer. Sonic welding sealing Technology ensures sealing solidity of the LED tail lights. Please make sure connect wiring and no electronic short before marine/underwater.

Wiring diagram ships with trailer lights, you can also find it on instruction sheet. Left and right led trailer tail lights have 7 functions : stop/turn/Tail/Rear reflector/side reflector/side marker light/ license plate light. Czc auto, we offer 30-day money-back guarantee for any reason, simply contact us, a reliable brand in trailer lights industry, 12-month warranty for quality-related issues. The trailer led lights are suitable for under 80 Inch width towing vechile, truck, utility trailer, like boat, snowmobile, ect.

The marine led trailer lights have super high visibility and Longer Lifetime!The waterproof trailer tail lights comply with DOT FMVSS108 certificate approval. Every possible gap is sealed well with marine grade glue, such as wires entrance holes and edge of the lens. 18 gauge 100% pure copper wire harness ensure trailer lights led do good job underwater!all diodes are LED, NOT Any incandescent bulbs! 100% quality inspection before shipping including photometric inspection. Excellent waterproof/submersible lights for boat trailer. Easy to install the submersible trailer lights.
BrandCZC AUTO #ad
ManufacturerCZC AUTO #ad
Height6.3 Inches
Length11.2 Inches
Width3.9 Inches
Part Number101001
Model13

6. ONLINE LED STORE

#ad

15" 9 LED 3 Red Trailer Light Bar DOT FMVSS 108 SAE P2 IP67 Submersible Identification Running Marker ID Rear Trailer Tail Light Bar for 80" Enclosed Motorcycle Utility Marine Boat Trailers

#ad
ONLINE LED STORE #ad - Ip67 submersible rated - waterproof and entirely-submersible for unparalleled all-weather usability; mounting bracket features water drainage notch for added protection. Dot-certified reflective lens - unlike cheaper, inferior quality ID bars, our unit boasts a DOT FMVSS-108 rated reflective lens design compliant with all relevant laws and regulations.

Straight-forward installation- mounting bracket features notches on its short sides for easy wire routing; positive input wire and ground wire are attached; mounts on 8. 5" centers. A must for 80" or wider trailers - trailers measuring 80" or wider require identification lights for additional visibility; mount this clearance light bar on the top of your truck/trailer or between the taillights to draw extra visibility to your wide trailer for added on-road safety.

Stainless hardware included. Solid construction - black bracket is made of long-lasting stainless steel, NOT substandard plastic like other light bar brackets.
BrandONLINE LED STORE #ad
ManufacturerONLINE LED STORE #ad
Height1.35 Inches
Length14.25 Inches
Weight0.31 Pounds
Width1.42 Inches
Part NumberCAZLEDTBL1515-RD
Model13

7. ProlinePPPI

#ad

4 Trailer Truck LED Sealed RED 6" Oval Stop/Turn/Tail Light Marine Waterproof Including 3-pin Water Tight Plug DOT/SAE with Wires and Grommet

#ad
ProlinePPPI #ad - 10 led super diodes for each light. Grommet fits standard mounting position. This sale includes 4pc of 6" red Oval Trailer Lights. The light is 2-5/16" x 6-7/16" oval, 1" thick 1-3/4" thick at wiring connection. Meets all applicable DOT/SAE standards and fit standard trailer light mounting position. Waterproof submarine Includes 3-pin water tight plug with wires. Fit in a standard 2-1/2" x 6-3/4" oval hole.
BrandProlinePPPI #ad
Manufacturerprolinepri #ad
Part NumberMGB

8. Partsam

#ad

Sealed 3-Light Truck and Trailer Identification LED Light Bar Red Led Strip w/Black Base, Partsam Red ID BAR Marker Light 3 Light 9 LED Trailer Sealed Stainless Steel

#ad
Partsam #ad - Size: 363mm x 30mm x 29mm 14. 3'' x 1. 18'' x 1. 1''; hole distance: 215mm 8. 46''; installation scews are included. Sealed, 3-leds each light, three-light, waterproof; surface mount, totally 9LEDs, Red Lens Red Light.

Partsam 1 x red waterproof identification light bar for trailers trucks etc, STAINLESS STEEL black base; LED identification light bar for trailer applications more than 80" wide. Three replaceable 3-led lights id bar universal for 12V Vehicles: Trucks and trailers as travel trailer, boat trailer, camper trailer, cargo trailer, horse trailer, RV, motorhome etc. Anyone of the three screws is the Negative and Red wire is the Positive end. East to install: the light contains a single lead wire for power and is grounded through the mounting hardware.
BrandPartsam #ad
ManufacturerPartsam #ad
Part NumberGTCV-0368174221
Model13

9. Kohree

#ad

Fully Submersible License Lights and Wiring Kit Combined Stop,Taillights,Turn Function for Boat Trailer, 12V LED Utility Trailer Lights DOT Approval, Kohree New LED Submersible Trailer Tail Light Kit

#ad
Kohree #ad - Simply to use. Full service trailer lights kit: this utility led trailer light kit has everything you need: 1x rectangle LED combination stop turn tail light37 Diodes, 25-ft wiring harness21. 65ft wiring harness and 3. 93ft wiring harness, 2x amber led marker lights, 1X Rectangle LED combination stop turn tail light with license illuminator48 Diodes, license plate bracket and mounting hardware.

Surface mount: with diodes soldered directly to the surface of a circuit board instead of attached with wires in the drilling-hole board, Kohree 12V led trailer lights protect LEDs from shock and vibration better than through-hole technology. Also, dust, it can effectively resist corrosion of sand, dirt, snow and other horrible weather. No glare led, turning or reversing and thus boosting their response time. Upgrade trailer light: come with additional atomization strip, maximizing light output and giving motorists behind you a better indication of when you're braking, Kohree submersible brake tail light kit has superior visibility and faster upon activation than other rectangle led trailer taillights.

Dot approval: kohree hola boat trailer light kit gives your truck a distinctive look and completely street legal, tractors, caravan, perfect replacement low profile trailer lights for under 80 Inch width towing vehicle, Van, canoes, RV, Lorry, trailer, bus, truck, like boat trailer, snowmobile etc. Sealed waterproof trailer light: no screws on the lamp surface IP68 waterproof, built in epoxy encased electronics and a sonically sealed body to prevent water intrusion and definitely submersible.
BrandKohree #ad
ManufacturerKohree #ad
Part NumberHY1028-HM

10. Partsam

#ad

Partsam 14x Trailer Marker LED Light Double Bullseye 10 Diodes Clearence Light Red/Amber, 4x2 Tiger Eye/Double Bubble 12V Rectangular LED Side Marker Light Indicators Surface Mount RV Camper Trucks

#ad
Partsam #ad - About 100mmlx 50mmw x 25mmh = 4" x 2" x 1" oval oblong rectangular rectangle led light sealed. Check image 2. Partsam 7 amber + 7 red oval oblong side marker light lamps; it is Universal For all auto esp.

Can be function as side marker Lights, Clearance Lamps and Indentification Lamps, Trailer Lights etc. Tiger eye / double bubble led marker lights; led marker trailer lights exterior lights; led running lights Side fender lights side body lights. Bullseye led side fender marker lights; Trailer-Style Rectangular LED Marker OR Turn Signal Lights. Tip: wires were brought out at the lower corner of the light and not the center,. Warning: wires come out from the conner, NOT from the center. Rv trailer Camper Boats etc.
BrandPartsam #ad
ManufacturerPartsam #ad
Part Number169709
Model13