As an Amazon Associate I earn from qualifying purchases.
Partsam #ad - Rv trailer Camper Boats etc. Check image 2. Warning: wires come out from the conner, NOT from the center. Partsam 7 amber + 7 red oval oblong side marker light lamps; it is Universal For all auto esp.
About 100mmlx 50mmw x 25mmh = 4" x 2" x 1" oval oblong rectangular rectangle led light sealed. Tiger eye / double bubble led marker lights; led marker trailer lights exterior lights; led running lights Side fender lights side body lights.
HHCSOP #ad - Led light- each light built in 10 high brightness LEDs. Sealed & waterproof assemblies. Or if you get any problems, we will give you a satisfactory response within 12 working hours! As side marker lights, roof lights, corner rear/front/side lights, cab lights.
Fitment- fits for heavy trucks like peterbilt, freightLINER, KENWORTH etc. Easy to install- 2 wires connection: black is the negative and red is the Positive; 100mm x 49mm x 26mm 4'' x 2'' x1''; Hole distance: 75mm 2.
Partsam #ad - Sealed, long led trailer clearance and Side Marker Light, 4-Diode - Amber/Red. 4" l; sealed, waterproof; surface mount; 2-wire; 4 LED Fender Marker light. This thin-line, sealed, rectangular LED light can be used as a clearance or side marker light.
ONLINE LED STORE #ad - A must for 80" or wider trailers - trailers measuring 80" or wider require identification lights for additional visibility; mount this clearance light bar on the top of your truck/trailer or between the taillights to draw extra visibility to your wide trailer for added on-road safety.
Solid construction - black bracket is made of long-lasting stainless steel, NOT substandard plastic like other light bar brackets.
Dot-certified reflective lens - unlike cheaper, inferior quality ID bars, our unit boasts a DOT FMVSS-108 rated reflective lens design compliant with all relevant laws and regulations. Straight-forward installation- mounting bracket features notches on its short sides for easy wire routing; positive input wire and ground wire are attached; mounts on 8. 5" centers.
ONLINE LED STORE #ad - Conspicuous - the high intensity led is placed behind a light dispersing lens designed to intensify light output and surrounded by an effective reflex reflector for improved day and nighttime visibility. Better than the rest - our lights are ip67 rated which means, unlike other lights, these side marker lights are just as comfortable on your boat trailer as they are on your work trailer.
You're covered - designed with water drain holes, that means clearer light, our lights are better equipped to deal with condensation and moisture buildup than other undrained marker lights, better performance, and a longer life.
Convenient - no need to buy reflective tape and side marker lights for your truck or trailer. Attention to detail- top markings allow you to quickly orient your lights for better function and appearance, convenient wire feed notches simplify wire routing, and a single stud mounting system means install is a breeze.
Nilight #ad - Fit type: Universal Fit. Wide application: suitable for almost all 12V battery vehicles, ships, UTVs, ATVs, cars, such as jeeps, motorcycles, yachts and trailers.
Two available leads: 12 foot extendable wiring harness, two Sets of light output connectors for dual light fixtures less than 180W. Package includes: 1pc 72w led light bars, 1 x 5Pin Rocker Switch Wiring Harness Kit.
ONLINE LED STORE #ad - But if your trailer lights aren't truly waterproof, your LEDs may not be as long-lasting as you think. Safe and compliant - our clearance lights are dot fmvss-108 compliant and meet the requirements for build quality, and visibility. Our single led clearance lights are a budget-friendly option that goes easy on your bottom line without going easy on quality.
Flexible - not every truck or trailer is created equal, that’s why we designed our amber clearance lights to be as universal as possible.
Fully sealed submersion IP67 rated, our amber clearance lights go the distance. Look good - practical doesn't have to mean plain. Their compact 2. 5" size with 2" mounting centers makes it easy to mount them wherever you need. Stay on budget - clearance and marker lights may be small, but if you're doing a major refit, the costs can quickly add up. True protection - leds are the long-lasting marker light option.
Nilight #ad - Package include 2pcS trailer marker ID bar with 2 hardware pack. Easy wire connection for wire connection white wire for ground black wire for low brightness tail light and red wire for high brightness brake light. Multi-functions each light has 11 high quality LED outputs high brightness and low brightness Can functions perfectly as parking light stop light turn signal light tail light and brake light.
Light bar mounting to flush-mounting the light one option is to drill a center hole or use the existing hole to go through the back wire lead and then fix the two ends by drilling in the two screws provided The other option is to add some washer when fixing the two ends or use a bracket to mount the light to avoid drilling holes for the back wire lead.
Highly sealed & durable the front polycarbonate lens is sonically welded to the housing and the back wire lead is add on glue to make sure the light is completely sealed Waterproof enough to withstand all weather abuse. Wide application can be perfectly used on most 12v heavy duty trucks, RV camper work vehicles, travel trailers, boat trailers, semi trailers, cargo trailers, horse trailers, etc.
Partsam #ad - Brightness: 80 lumen each light with 2 pcs high quality leD Diodes; Universal fits for 12V vehicles like Pickups Truck Trailers SUV van Caravan Camper Motorhome Boat Lorry Bus etc. Also some put them on motorhome as position lights.
These are universal. Generally people use them as clearance, side marker or identification light. Partsam 4red+4amber mini-sealed LED Surface mount design in for clearance, side marker or identification light.
We also get feedbacks form our customers and they use them for trailer lights 2 for brake lights and two for tail light on each side. 64mm x 26mm x 18mm 2. 54" x 1. 01" x 07";the center to center dimension between the screw holes: 46mm 1. 8".
Nilight #ad - Fit most trailers, etc. Brighter and safe: employ quality led to draw less amperage but outputs optimal brightness, improving great visibility and extend longer lifetime than the incandescent lamp. Bus, lorry, side marker, tractors, turn tail light, RV, caravan, Marine, boats, camper, Pickups, trucks, side reflector, van, rear reflector, snowmobile utility trailers.
7 full functions: combined functions of stop, license plate light. 100% dot compliance to ensure your safety! Ip68 entirely submersible: inside leds and circuit board is fully waterproof sealed to work under water perfectly without electric short risk.
Perfect for 12v dc vehicles with max width of 80 inches. All-in-one kit: comes with everything for your straightforward installation, license plate bracket, 25ft length trailer wiring harness, include square lights, the reflector and the different types of stainless steel mounting hardware. Easy installation: light mounting: stud-mounted on the surface design, light with license light on the left, the other on right. For hardware instruction, amber clearance light, please picture 8.
1. Partsam
#adPartsam 14x Trailer Marker LED Light Double Bullseye 10 Diodes Clearance Light Red/Amber, 4x2 Tiger Eye / Double Bubble 12V Rectangular LED Side Marker Light Indicators Surface Mount RV Camper Trucks
#adAbout 100mmlx 50mmw x 25mmh = 4" x 2" x 1" oval oblong rectangular rectangle led light sealed. Tiger eye / double bubble led marker lights; led marker trailer lights exterior lights; led running lights Side fender lights side body lights.
More information #ad
Tip: wires were brought out at the lower corner of the light and not the center,. Can be function as side marker Lights, Clearance Lamps and Indentification Lamps, Trailer Lights etc. Bullseye led side fender marker lights; Trailer-Style Rectangular LED Marker OR Turn Signal Lights.| Brand | Partsam #ad |
| Manufacturer | Partsam #ad |
| Part Number | 169709 |
| Model | 13 |
More information #ad
2. HHCSOP
#ad2 Wire, 10Pcs Amber Trailer Marker Light 10 LED Double Bullseye Side Marker Lights Tiger Eye Lamp 4x2 Rectangle Led Light Indicators Surface Mount RV Camper Trucks
#adFitment- fits for heavy trucks like peterbilt, freightLINER, KENWORTH etc. Easy to install- 2 wires connection: black is the negative and red is the Positive; 100mm x 49mm x 26mm 4'' x 2'' x1''; Hole distance: 75mm 2.
More information #ad
95''. High quality- every kit features super strong abs plastic lenses which have been UV treated so they will not fade from prolonged exposure to sunlight and weather elements. Ideal for cab and sleeper panels Fits Standard 3" mounting Holes. Quality service-if the product fails, stops working or any other problems, cracks, simply contact us for a free replacement. Ip67 waterproof DOT Certified.| Brand | HHCSOP #ad |
| Manufacturer | HHCSOP #ad |
| Height | 4.3 Inches |
| Length | 5.8 Inches |
| Width | 5.7 Inches |
| Part Number | KO10063 |
| Model | 10x Double Bubble Bullseye Side Light |
More information #ad
3. Partsam
#adPartsam 4x Waterproof Amber/Red 4LED Side Marker Light for Trailer Truck Boat DC12V, Slim Waist
#adMore information #ad
The two-wire design includes the lead and ground wires to mount to any surface. Light size:3. 85"x1. 2"x08"; light size with base:4"x1. 3"x1"; hole to hole size:2. 2" note: not the two prong type, these are hardwired into the vehicleBlack is negative and Red positive; SCREWS ARE INCLUDED;.| Brand | Partsam #ad |
| Manufacturer | Partsam #ad |
| Weight | 0.31 Pounds |
| Part Number | GTCV-0368173083 |
| Model | FBA_126345 |
| Warranty | 1 Year Warranty |
More information #ad
4. ONLINE LED STORE
#ad15" 9 LED 3 Red Trailer Light Bar DOT FMVSS 108 SAE P2 IP67 Submersible Identification Running Marker ID Rear Trailer Tail Light Bar for 80" Enclosed Motorcycle Utility Marine Boat Trailers
#adSolid construction - black bracket is made of long-lasting stainless steel, NOT substandard plastic like other light bar brackets.
More information #ad
Stainless hardware included. Ip67 submersible rated - waterproof and entirely-submersible for unparalleled all-weather usability; mounting bracket features water drainage notch for added protection. Dot-certified reflective lens - unlike cheaper, inferior quality ID bars, our unit boasts a DOT FMVSS-108 rated reflective lens design compliant with all relevant laws and regulations. Straight-forward installation- mounting bracket features notches on its short sides for easy wire routing; positive input wire and ground wire are attached; mounts on 8. 5" centers.
| Brand | ONLINE LED STORE #ad |
| Manufacturer | ONLINE LED STORE #ad |
| Height | 1.35 Inches |
| Length | 14.25 Inches |
| Weight | 0.31 Pounds |
| Width | 1.42 Inches |
| Part Number | CAZLEDTBL1515-RD |
| Model | 8542088531 |
More information #ad
5. ONLINE LED STORE
#ad2pc Amber LED Side Marker Light DOT Certified IP67 Waterproof Integrated Reflector for Utility Boat Trailers Over 80" Camper RV Clearance Light
#adYou're covered - designed with water drain holes, that means clearer light, our lights are better equipped to deal with condensation and moisture buildup than other undrained marker lights, better performance, and a longer life.
More information #ad
Our lights combine the features of a side marker light and a reflector so your vehicle can easily meet the requirements of DOT FMVSS-108. Convenient - no need to buy reflective tape and side marker lights for your truck or trailer. Attention to detail- top markings allow you to quickly orient your lights for better function and appearance, convenient wire feed notches simplify wire routing, and a single stud mounting system means install is a breeze.
| Brand | ONLINE LED STORE #ad |
| Manufacturer | ONLINE LED STORE #ad |
| Height | 3 Inches |
| Length | 4 Inches |
| Width | 4 Inches |
| Part Number | SIL3001-AM-X2 |
More information #ad
6. Nilight
#adZH084 LED Light Bar 1PC 12Inch 72W Spot Flood Combo LED Off Road Lights 12V 5Pin Rocker Switch LED Light Bar Wiring Harness Kit- 2 Leads, 2 Years Warranty, Nilight
#adTwo available leads: 12 foot extendable wiring harness, two Sets of light output connectors for dual light fixtures less than 180W. Package includes: 1pc 72w led light bars, 1 x 5Pin Rocker Switch Wiring Harness Kit.
More information #ad
Adjustable bracket: the mounting bracket can be adjusted and slid, offering convenience to adjust position flexibly when needed. Super bright: spot beam for long irradiation distance, flood beam for the broad view area, combo beam provides excellent visual effect.| Brand | Nilight #ad |
| Manufacturer | Nilight #ad |
| Part Number | ZH084 |
| Model | ZH084 |
| Warranty | 2 Years Warranty |
More information #ad
7. ONLINE LED STORE
#ad12pc 2.5" Amber LED Trailer Marker Light Kit w/Chrome Bezel DOT FMVSS 108 SAE P2 Surface Mount Waterproof IP67 Side Marker Lights for Trailer Truck
#adFlexible - not every truck or trailer is created equal, that’s why we designed our amber clearance lights to be as universal as possible.
More information #ad
With a unique chrome bezel, our single LED clearance lights stand out from the crowd. For these lights, staying on budget and looking good are the same thing. You can feel confident that you're installing a light that is completely safe, durability, compliant, and legal. Fully sealed submersion IP67 rated, our amber clearance lights go the distance. Look good - practical doesn't have to mean plain. Their compact 2. 5" size with 2" mounting centers makes it easy to mount them wherever you need. Stay on budget - clearance and marker lights may be small, but if you're doing a major refit, the costs can quickly add up. True protection - leds are the long-lasting marker light option.
| Brand | ONLINE LED STORE #ad |
| Manufacturer | ONLINE LED STORE #ad |
| Height | 4 Inches |
| Length | 7 Inches |
| Width | 6 Inches |
| Part Number | SIL2564-AM-X12 |
More information #ad
8. Nilight
#adTL-10 2PCS 16” 11 LED Red Trailer Light Bar for Park Stop Turn signals Tail Brake Light DOT Compliant IP65 Waterproof Truck Trailer Marker ID Bar, 2 Years Warranty, Nilight
#adLight bar mounting to flush-mounting the light one option is to drill a center hole or use the existing hole to go through the back wire lead and then fix the two ends by drilling in the two screws provided The other option is to add some washer when fixing the two ends or use a bracket to mount the light to avoid drilling holes for the back wire lead.
More information #ad
Highly sealed & durable the front polycarbonate lens is sonically welded to the housing and the back wire lead is add on glue to make sure the light is completely sealed Waterproof enough to withstand all weather abuse. Wide application can be perfectly used on most 12v heavy duty trucks, RV camper work vehicles, travel trailers, boat trailers, semi trailers, cargo trailers, horse trailers, etc.
| Brand | Nilight #ad |
| Manufacturer | Nilight #ad |
| Part Number | TL-10 |
| Model | TL-10 |
| Warranty | 2 Years Warranty |
More information #ad
9. Partsam
#ad2 Diodes, Partsam Universal Red/Amber Surface Mount LED Side Fender Marker Lights, Sealed Mini LED Side Marker Clearance Identification Lights, 2.54 x 1.06 Pack of 8, 2 Wire
#adThese are universal. Generally people use them as clearance, side marker or identification light. Partsam 4red+4amber mini-sealed LED Surface mount design in for clearance, side marker or identification light.
More information #ad
Easy to install and hardwired with free end wire black is positive: White is Negative/ground ; the wires come out of the back of the light; Two-wire design includes both lead wire and ground wire for mounting to all surfaces;. We also get feedbacks form our customers and they use them for trailer lights 2 for brake lights and two for tail light on each side. 64mm x 26mm x 18mm 2. 54" x 1. 01" x 07";the center to center dimension between the screw holes: 46mm 1. 8".
| Brand | Partsam #ad |
| Manufacturer | Partsam #ad |
| Weight | 0.42 Pounds |
| Part Number | Partsam-124543 |
| Model | Partsam-124543 |
| Warranty | 1 Year Warranty |
More information #ad
10. Nilight
#adNilight 2PCS Square LED Trailer Light Kit Low Profile Submersible IP68 LED Stop Turn Tail Side Marker License Light for 12V Utility Trailer Boat Camper RV Trucks Marine Snowmobile,2 Years Warranty
#ad7 full functions: combined functions of stop, license plate light. 100% dot compliance to ensure your safety! Ip68 entirely submersible: inside leds and circuit board is fully waterproof sealed to work under water perfectly without electric short risk.
More information #ad
Wiring connection: color coded wire, just color to color white to the ground vehicle frame and then follow picture 6 for wire routing instruction. The light housing also features water drainage for added protection. Perfect for 12v dc vehicles with max width of 80 inches. All-in-one kit: comes with everything for your straightforward installation, license plate bracket, 25ft length trailer wiring harness, include square lights, the reflector and the different types of stainless steel mounting hardware. Easy installation: light mounting: stud-mounted on the surface design, light with license light on the left, the other on right. For hardware instruction, amber clearance light, please picture 8.
| Brand | Nilight #ad |
| Manufacturer | Nilight #ad |
| Part Number | TL-22 |
| Model | TL-22 |
| Warranty | 2 Years Warranty |
More information #ad
