Top 10 VAG Tacho Software And Cable – Code Readers & Scan Tools

As an Amazon Associate I earn from qualifying purchases.

1. Fydun


For VAG Tacho, Auto Scanner Cable,Car Diagnostic Test Line USB Version V5.0 for VAGtacho Scanner Cable Replacement for A3

Fydun #ad - The records of every quality control link in product production are very strict, so you can buy with confidence. Easy to use: auto diagnostic tool is easy to install and use, and has stable and professional performance. Therefore, does not require complicated operating steps and tools, is simple and quick to operate, supports Viem memory buffer, does not require much time, it has stable and excellent performance.

High-quality material: car test line uses high-quality abs material, not easy to damage, high reliability, high sensitivity, which is moisture-proof, fine workmanship, high reliability, and longer service life, anti-corrosion, heat-resistant, bfor RINGing you a good experience. Excellent performance: vagtacho cable is used to read ecu information and PIN code, read and write eeprom, multi-functional design, programmers new keys, can clear ECU errors, convenient and practical, allows to change mileage, bfor RING you a lot of convenience.

Please check whether it is compatible before purchasing. Purchase with confidence: from the purchase of for raw materials to the factory inspection of products, we will conduct inspections at each stage, and each stage has a record. Applicable type: car diagnostic line has good compatibility and is very suitable for replacement for Volkswagen, Fit for for JETTA, Fit for Polo, Fit for EOS with VDO dash 2009-2011, Golf 6, etc.
BrandFydun #ad
ManufacturerFydun #ad
Height0.39 Inches
Length0.39 Inches
Weight0.28 Pounds
Width0.39 Inches
Part NumberFydunxfe836ti2v1949

2. OBDLink


OBDLink EX FORScan OBD Adapter

OBDLink #ad - Rock-solid connection avoids data corruption and dropped packets. Maximum throughput -- up to 20 times faster than “toggle switch” adapters. Electronic switch allows forscan to access all caN buses simultaneously and enables advanced functions not possible with “toggle switch” adapters. Custom-designed for use with forscan and recommended by the FORScan Team. Dealership-level diagnostics: OBDLink EX supports all Ford protocols, modules, and advanced features of FORScan.
BrandOBDLink #ad
ManufacturerOBD Solutions #ad
Height1.8 Inches
Length3.5 Inches
Width1 Inches
Part NumberEX101

3. Bafx Products


Wireless Bluetooth OBD2 Scanner & Code Reader, Compatible with all 1996 & newer vehicles for USA, Engine Fault Code Reader Scanner, Bafx Products

Bafx Products #ad - Works on all cars purchased in the USA model year 1996 or newer. This obd2 scanner does not read ABS, SRS, TPMS or Oil Change lights. Read & reset the check engine light on your car with ease find out why that check engine light is on so you can fix it quickly! Monitor the diagnostic sensors in your vehicle in real time for things like O2 data, fuel pressure, EVAP system & more.

Huge app selection - 3rd party app must be downloaded to use; Choose from many OBDII apps such as Torque Pro, Piston, Dash Command, OBD Fusion & more. Warranty - 2 year manufacturer warranty with USA based friendly support staff; Don't be left stranded by support. Not compatible with ios devices - iphones, ipads etc; our bluetooth obd2 scanner is only compatible with android or windows deviceS; For iOS devices, see our WiFi OBD Reader.
BrandBafx Products #ad
ManufacturerBAFX Products #ad
Height1 Inches
Length2.75 Inches
Weight0.18 Pounds
Width1.5 Inches
Part NumberBAFX3127
Warranty2 Years Parts + Labor



LZLRUN K+CAN K+DCAN Car Diagnostic Tool Cable OBD USB Interface with Switch for BMW with FT232RL NCS Coding Winkfp Tool32 Programing

LZLRUN #ad - In ft232rl chip, quick connect and response. Note:because this product is a technical automotive diagnostic products, if not familiar with the diagnostic technology, please buy carefully, thank you.

Interface usb obd2 for bmw - ediabas - k+dcan allows full diagnostic for bmw from 1998 to 2019 all functions as in OMNITEC interface. Your fantastic obd2 diagnostic DIY tool, to same your time and money, enjoy your DIY diagnose. Our diagnostic cable is the green PCB board, Our diagnostic cable with Switch, so now it can support more cars easier. Build in 2 lines K and D-Can magisterial. Works flawlessly with n54, s55, b58, n55, n55e, and n13 for MHD Flasher with Android device. You may need a USB C adapter.
BrandLZLRUN #ad
ManufacturerLZLRUN #ad
Height1.18 Inches
Length6.3 Inches
Weight0.26 Pounds
Width4.72 Inches
Part NumberK2685-0407

5. OHP


OHP ENET OBD Cable for BMW ICOM E-SYS ISTA | Bootmod3 Bimmercode OBD2 | Coding F-Series | 5 Feet

OHP #ad - Program or hide modules: the 5 ft. Pure copper, and lead-free solder all mean that this cable will work for years to come. Modules are the separate computer programs that run various aspects of your vehicle, from the physical function to the accessories and tools of your vehicle. It works with many different BMW models.

Our 3m obd interface cable works with many different software options, letting you take the approach to your vehicle that makes the most sense to you. The 16-pin obd connector is flexible so that shifting around with your computer won’t damage the car’s connector. It is abrasion-resistant with gold plating and a grounded and shielded RJ45 connector. Ethernet to obd cable gives you control over the modules available in your bMW. This cable will work with any of them, giving you full access to your vehicle’s modules. By modifying various e-SYS modules, you’ll have more control than you can imagine.

Supported bmw models include: bmw f-series, 3 series, 5 Series, the new 1 Series, gt, 7 Series, X3 and the latest BMW G-Series. With this cable and a diagnostic tool, you can choose to program a single module or hide multiple modules. Bmw owners purchase their vehicles because they want a top-of-the-line car that looks great, has plenty of power, and – perhaps more than anything else – is entirely under their control. Software compatibility: some cables limit you to just one type of software for your module exploration.
BrandOHP #ad
ManufacturerOHP #ad
Part Number10122

6. Taotao


Taotao K+CAN Cable with Switch FT232RL K+D CAN USB Interface Cable Car Ediabas K+ Dcan USB OBD2 OBDii Diagnostic Scanner for BMW

Taotao #ad - Sometimes, it is compatible with Window 8/10, it is up for your system. Switched inpa k+dcanyou can use the switch to do more cars. Some cars need disconnect to use the inpa k+dcan, but others need connect.

Compatible system it is perfect for windows 7 32bit system. The software cannot work with antivirus. It can support more cars after adding the switch. Not every model need switch. Please disable or uninstall the anti-virus software on your PC to make sure the diagnose software works normally. K + dcan k+can cable k + dcan car obd cable allow diagnostic for e cHASSIS from 1998 - 2019.

Works with d-can, pt-can, K-CAN and etc. Original chip100% original brand new ftdi 232rL. It is imported from the Original factory. Board and raw materials are made of high quality Plastic materials. Install noteany installation problems, please feel free to contact us. The virus protector may notify it as“virus” by mistake. Don't fit the mac OSX.
BrandTaotao #ad
ManufacturerAD #ad
Part NumberInpa

7. AutoGrills


16-Pin Car Programming Cable, Support VAG-COM KKL 409.1, for Win XP/ WIN7 32bits ONLY, OBD2 Scanner Diagnostic Cable for VW Audi Skoda Seat Volkswagen, OBD II Adapter Connector Cable Scan Tool

AutoGrills #ad - What you will get - we offer obdii cable 24 month service, please contact us by email, any questions about OBDII cable converter adaptor, we will reply you within 24 hours. You will get a obd2 connector cable scan tool. Supported also ISO9141 protocol. Without cd inside the package, the the driver and user manual will be sent to buyers by Email.

Fully compatible with all models of the above makes of car or van produced between 1996 and 2006. Protocols supported - support terminal k bus communication, vpw, terminal l ignition device for waking up ecu. Fitment - about vag-comvag-com is a windows based diagnostic software for volkswagen, Audi, Seat and Skoda vehicles that emulates the functions of expensive professional scan tools. Existed 3 different protocols with same OBD2 connector incl. This k/l diagnostic interface & cables work on ISO/KWP Key Word Protocol launched after 1996 only.

Iso/kwp, pmw. Pls note - this cable can not work if your car uses a protocol/ bussystem like VPW, PWM or CAN-bus. Function - this vag_com obd ii interface enables you to connect your pc to your car so that you can troubleshoot any problems in your vehicle by reading the Diagnostic Trouble Codes DTC’s that appear when the ‘check engine’ light is showing. Workable modelsthis diagnostic cable is usable for ISO9141 and KWP2000 transmission protocol.
BrandAutoGrills #ad
ManufacturerOBD2 Scanner Cable #ad
Part NumberFRZDQ098
ModelVAG-COM KKL 409.1 OBD2 Scanner Cable



ANCEL AD310 Classic Enhanced OBD II Scanner Car Engine Fault Code Reader CAN Diagnostic Scan Tool-Black

ANCEL #ad - There are 4 buttons on AD310 Classic design, even a beginner can use it read the error code, fast scan and erase trouble codes, find out what the problem is and perhaps fix it. I/m monitor readiness test, turn off the MIL check engine light as well as view freeze frame data.

Save money and time. Easily determines the cause of the check engine light. No need any batteries or charger, gets the power directly from the OBDII Data Link Connector in your vehicle. It's equipped with a 2. The up and down button for scrolling the menu, the Enter and Exit button allow for navigation back and entering menu. The ad310 scanner is well built with a large lcd display 128 x 64 pixel that has white backlight and contrast adjustment, indicates test results directly.

Read hard memory / pending intermittent and historic codes and show definitions. Supports english, Spanish, Dutch, Russian and Portuguese.5 feet long cable and made of a very thick flexible insulator. Works on most 1996 us-based, 2000 eu-based and asian cars, french, finnish, german, and newer OBD II & CAN domestic or import vehicles. It can not read and erase ABS, SRSAirbag, and other systems fault codes.
BrandANCEL #ad
ManufacturerANCEL #ad
Weight0.6 Pounds
Part NumberAD310
WarrantyFor AD310 OBD2 scanner



FOXWELL NT301 OBD2 Scanner Professional Mechanic OBDII Diagnostic Code Reader Tool for Check Engine Light

FOXWELL #ad - Home necessityopen to global customers. Smog check helperread/erase and i/m readiness hotkeys make it easy to use the car computer reader right out of the package. Accurately read error codes for most Worldwide cars, SUVs, light trucks and 12V diesels equipped with Obd2.

Unique patenteD design, 2. 8" color screen, free lifetime update and 1-year seller assurance with EXCLUSIVE tech and service team. Vehicle cel doctorthe nt301 obd2 scanner enables you to read dtcs, reset monitor, locate bad O2 sensors, turn off CELcheck engine light or MIL, access to emissions readiness status, read live data and retrieve VIN of your vehicle. No battery required, nt301 obd scanner is charged directly from the 16pin DLC in your vehicle. Appreciate very much! warm tipsnt301 car scanner can be used directly with no need for registration or update, as it is already the latest version.

Graphing live vehicle sensors data allows you to focus on any suspicious data and trend. If any scratches are found, just tear off the screen protector from the upper left or upper right corner. Red-yellow-green leds and build-in speaker indicate the readiness status for confident emissions test. Codes analysis and Printer compatible. :. It is recommended as a necessity in your toolbox and one of the best gifts for Home and Autoshop Mechanics.
BrandFOXWELL #ad
ManufacturerFOXWELL #ad
Height6.69 Inches
Length8.66 Inches
Width3.15 Inches
Part NumberNT301

10. Autel


Autel AutoLink AL319 OBD2 Scanner Automotive Engine Fault Code Reader CAN Scan Tool

Autel #ad - High-quality services 12 months warranty from the date of purchase and lifetime free update are offered by this Automobile OBDII scan tool. Extensive application compatible with 7 languages english, nissan, etc. Spanish, etc. Welcome to contact us via Q&A, email, or hotline, and our after-sale-service team for technical support.

No batteries are needed. Turn off cel this car diagnostic tool supports reading dtcs, to help you detect any potential problems, Freeze Frame & I/M Readiness etc to figure out the root cause of the Check Engine Light CEL and turning it off, displaying Live Data, and to avoid excessive costs for unnecessary repairs. And various post-1996 obd ii protocol vehicles toyota, Honda, French, Ford, this OBD II scanner provides accurate and fast diagnosis for worldwide car owners.

The cable is long enough without being too long and getting in the way. User-friendly design this check engine code reader features a patented one-click i/M Readiness Key, TFT color display, built-in speaker, LED Indicator etc. For end user & diyers this error code reader is “plug and play” and comes with an easy interface. Even if you’re not familiar with vehicle repair, you can quickly take control of this code reader, and get the information you want.
BrandAutel #ad
ManufacturerAutel #ad
Height0.71 Inches
Length4.61 Inches
Weight0.39 Pounds
Width2.83 Inches
Part NumberAL319
WarrantyManufacturer Limited