As an Amazon Associate I earn from qualifying purchases.

1. Truck Upfitters

#ad

45 pounds of pressure ea for ARE, ATC, 2 Truck Upfitters 17" Gas Props 17.1" extended, Snugtop, Leer Camper Shell/Truck Cap Rear Door. MEASUREMENT REQUIRED! Incl 4 ball mounts!, 9.9" compressed

#ad
Truck Upfitters #ad - 17. 1" extended length and 9. 9" compressed length. Check lengths and pressure before ordering. These do not fit all camper shell brands / models.

These do not fit all tops! the measurements are from center of ball mount to center of ball mount, not from end to end of strut! see picture! Truck upfitters pair of 45 pound each gas struts. Equivalent to suspa # c16-04270 or stabilus # 1822. Prime! free shipping! In Stock! Comes with four 10mm threaded ball mounts and nuts for alternate 'other than camper shell' applications. Measure your strut from center of socket to center of socket when fully opened and fully closed to get accurate measurement.
BrandTruck Upfitters #ad
ManufacturerTruck Upfitters #ad
Height1 Inches
Length18 Inches
Weight0.81 Pounds
Width2 Inches
Part Number171099-45-10
Model171099-45-10

2. Xprite

#ad

Side Marker, Xprite White Truck Pickup Bed Light Kit, Foot Wells, 24 Led Cargo Rock Lighting Kits w/Switch for Van Off-Road Under Car, Rail Lights, 8 PCS

#ad
Xprite #ad - Application: can be used in a variety of interior and exterior applications including Under Car, Toyota, Rock Lights, Dodge Ram, etc. Allowing you to work after dark without having to hold a flashlight or plug in a portable work light.

Compatible with most pickup such as ford, SUVs, RVs, jeeps, Foot Wells, Truck Beds, trucks, Chevrolet, boats etc. Unique design: each rectangle lighting pod is small in size but provides plenty of light and only 025 of an inch thick makes them extremely easy to hide, unlike the competition which uses a larger pod that may hang below the bed rails. Weatherproof: waterproof rate: IP67, Snow, shockproof, design to withstand harsh weather conditions.

Rain, etc. Easy installation: the reliable 3m adhesive can be quickly installed and can be fixed with screws to be more secure; In addition, includes with a switch so you can freely control your LED lighting pods, has 21 Feet of Wire per Strand 4 pods per strand, 2 Feet of Wire Between Each Pod. Features: total of 8 decorative lighting pods housing a total of 24 Ultra-Bright SMD LEDs.
BrandXprite #ad
ManufacturerXprite #ad
Part NumberDL-001-L3-W
ModelDL-001-L3-W

3. Truck Upfitters

#ad

Leer Camper Shell/Truck Cap Rear Door. MEASUREMENT REQUIRED! Incl 4 ball mounts!, 9.4" compressed, 45 pounds of pressure ea for ARE, ATC, 2 Truck Upfitters 16" Gas Props 15.7" extended, Snugtop

#ad
Truck Upfitters #ad - Check lengths and pressure before ordering. Prime! free shipping! In Stock!15. 7" extended length and 9. 4" compressed length. Equivalent to suspa # c16-23993 or stabilus # 14269.

Measure your strut from center of socket to center of socket when fully opened and fully closed to get accurate measurement. These do not fit all tops! the measurements are from center of ball mount to center of ball mount, not from end to end of strut! see picture! Truck upfitters pair of 45 pound each gas struts. These do not fit all camper shell brands / models. Comes with four 10mm ball mounts for alternate 'other than camper shell' applications.
BrandTruck Upfitters #ad
ManufacturerTruck Upfitters #ad
Height0.5 Inches
Length16 Inches
Width0.5 Inches
Part Number157094-45-10
Model157094-45-10

4. Truck Upfitters

#ad

17.95" compressed, 2 Truck Upfitters 29.5" Gas Props for Snuglid SL & F2 Pickup Truck Longbed Tonneau Covers 29.5" extended, 100 lbs of pressure ea MEASUREMENT REQUIRED! Incl 4 ball mounts and nuts!

#ad
Truck Upfitters #ad - Measure your strut from center of socket to center of socket when fully opened and fully closed to get accurate measurement. Most commonly used for snuglid/snugtop brand SL & F2 models and Snuglid style Tonneau covers with 2 single lift assist arms.

Also check for 100 pounds of pressure, or 444N - 445N Newtons of pressure. These do not fit all snuglid fiberglass tonneau models they do not fit any sl2 or rl models. Comes with four threaded 13mm ball mounts and nuts for alternate 'other than tonneau cover' applications. These do not fit all snuglid tonneau covers! the measurements are from center of ball mount to center of ball mount, not from end to end of strut! see picture! Truck upfitters pair 2 total of 100 pound each gas struts.

Fits other similar brand of fiberglass tonneau covers / truck lids, but measurement is required to ensure fit. Check your lengths and pressure before ordering. 29. 5" extended length and 17. 95 compressed length. Equivalent to stabilus 636703 or Snuglid # 720485. Prime! free shipping! in stock! Fits many but not all snuglid sl and f2 long bed 8. 0' truck tonneau Covers with single lift arms see picture.
BrandTruck Upfitters #ad
ManufacturerTruck Upfitters #ad
Height0.87 Inches
Length29.5 Inches
Weight1.31 Pounds
Width0.87 Inches
Part Number295179-100-13
Model295179-100-13

5. Gordon Glass Co.

#ad

Truck Cap Locking T-Handle, Clockwise

#ad
Gordon Glass Co. #ad - Package: one t-handle and two keys. Rotation: 90cw ; shaft 1-7/8 inches long. Clockwise T-Handle. Black powder coated finish. Mounting: blind 1-1/2cc with 3/8" Lugs, Tapped 10-24 x 3/8".
BrandGordon Glass Co. #ad
ManufacturerGordon Glass Co. #ad
Part Number398695