As an Amazon Associate I earn from qualifying purchases.
Tools & Harware #ad - Ph neutral Chemistry. Chemically compatible with most solder masks and board laminates. High activity. Classified as orh1 per J-STD-004.
Outus #ad - Safe to use: these flux pens are made of quality material, no leak and safe to use; Low solids content and quality of the activator system results in practically no residue left on the assembly after soldering; No residue will interfere with electrical testing.
How to use: before the first time use, then use no clean solder flux pen to remove the oxidizing wax; After that, you should press the pen tip 1 - 2 times for releasing air, you can use the alcohol to clean the pen. Useful and practical: no clean soldering flux pen is a novel tool for rework and repair welding; It allows controlled application of flux, thereby removing dirt in the flux bottle; Pen tip of 10 ml with practical designed felt tip; The solid content is low and there is almost no residue; It is compatible with no and solders.
Wide application: rosin solder flux pen is suitable for automotive, computer, and through hole solder joints; It is lightweight and would not occupy too much space, work for rework, suitable pocket size to carry.5. 6 inches in length. Quantity and size: package contains 3 pieces soldering flux pens, enough quantity for meeting your daily usage and replacement; Each soldering flux pen measures approx.
Ferraycle #ad - Wide applications: these soldering pens and braided solder wicks can be applied for laboratory, electronics welding, etc. Home repairs and correcting small PCB board errors and through hole solder joints, computer, bringing a lot of convenience to your work and improving efficiency. Practical tools: 10-ml solder pen with soft brush tip can release the liquid flow moderately, which can clean the components without harming the PCB board copper foil or IC pin; The solder remover wick features good thermal conductivity and absorption, useful to reduce the risk of thermal injury to the circuit boards.
Package includes: you will receive 3 pieces of no clean solder pens, in total of 6 pieces, and 3 pieces of soldering braided wick, sufficient quantity and a considerate combination to meet your needs for daily use and replacement. Quality material: these no clean soldering wicks are made of quality copper wire and adopt precise weaving technology, no leaking and safe for protecting the flux, which can enhance tension on the surface to absorb excess solder; The liquid solder pen is made of reliable materials, preventing you from touching the organic solvents.
SHOUD #ad - Also can use for rework and touch-up of SMT, and through hole solder joints. Save money:solder flux is No-clean pen. Eliminates the need and expense of cleaning.
Material:soldering flux pen is made of safe material. There are no residues to interfere with electrical testing. Uses:soldering pen is suitable for automotive, SMD, computer, telecom.
MG Chemicals #ad - Meets ipc j-std-004b and type ORL0 Residues do not require cleaning. Chiseled tip allows precise application. Rosin/resin free. For both leaded and lead-free solders.
1. Tools & Harware
#adKester 83-1000-0186 Mildly Activated Rosin Liquid Flux Pen for Lead-Bearing and Lead Free Alloy, 0.33 fl. oz.
#adMore information #ad
| Brand | Tools & Harware #ad |
| Manufacturer | NTE Electronics, Inc. #ad |
| Weight | 0 Pounds |
| Width | 0.5 Inches |
| Part Number | 83-1000-0186 |
| Model | 83-1000-0186 |
More information #ad
2. Outus
#adNo, Welding Maintenance of PCB Board, 3 Pieces No Clean Soldering Flux Pen Rosin Solder Flux Pen for Electronics Tabbing Wiring Solder
#adHow to use: before the first time use, then use no clean solder flux pen to remove the oxidizing wax; After that, you should press the pen tip 1 - 2 times for releasing air, you can use the alcohol to clean the pen. Useful and practical: no clean soldering flux pen is a novel tool for rework and repair welding; It allows controlled application of flux, thereby removing dirt in the flux bottle; Pen tip of 10 ml with practical designed felt tip; The solid content is low and there is almost no residue; It is compatible with no and solders.
More information #ad
Wide application: rosin solder flux pen is suitable for automotive, computer, and through hole solder joints; It is lightweight and would not occupy too much space, work for rework, suitable pocket size to carry.5. 6 inches in length. Quantity and size: package contains 3 pieces soldering flux pens, enough quantity for meeting your daily usage and replacement; Each soldering flux pen measures approx.
| Brand | Outus #ad |
| Manufacturer | Outus #ad |
| Part Number | Outus-3442 |
More information #ad
3. Ferraycle
#adSolder Braid Wick Liquid Solder Flux for Electronics Welding Repair Tabbing Wire Maintenance 6 Pieces, 0.1 Inch Wide and 59 Inch Long, No Clean Soldering Pen and Solder Remover Wick
#adMore information #ad
Suitable size: the rosin pen measures about 14. 3 cm/ 5. 6 inches in length, and the solder braided wick is about 1. 5m/ 59 inches long and 2. 5mm/ 01 inches wide, which is convenient to hold in hand; Please check the size carefully before purchasing. Package includes: you will receive 3 pieces of no clean solder pens, in total of 6 pieces, and 3 pieces of soldering braided wick, sufficient quantity and a considerate combination to meet your needs for daily use and replacement. Quality material: these no clean soldering wicks are made of quality copper wire and adopt precise weaving technology, no leaking and safe for protecting the flux, which can enhance tension on the surface to absorb excess solder; The liquid solder pen is made of reliable materials, preventing you from touching the organic solvents.
| Brand | Ferraycle #ad |
| Manufacturer | Ferraycle #ad |
| Part Number | Ferraycle-Flux Pen-17 |
More information #ad
4. SHOUD
#adLow-Liquid Solder Flux Pen for Welding Maintenance of PCB Board, SHOUD No Clean Soldering Flux Pen, 10ML Rosin Solder Flux Pen, Repairing Electronics, Tabbing Wiring Solder
#adMaterial:soldering flux pen is made of safe material. There are no residues to interfere with electrical testing. Uses:soldering pen is suitable for automotive, SMD, computer, telecom.
More information #ad
Superior fluxing ability: flux pen exhibits improved soldering performance to minimize solder bridges shorts during rework operations. Compatible with lead and lead-free solders. Portable pen: no clean soldering flux pen is very easy to use and carry. 10ml pen applicator with specially designed felt tip.| Brand | SHOUD #ad |
| Manufacturer | SHOUD #ad |
| Part Number | 0 |
More information #ad
5. SRA Soldering Products
#adRefillable, SRA #312 Soldering Flux Pen Low-Solids, No-Clean 10ml
#adSRA Soldering Products #ad - Compatible with Lead and Lead-Free Solders. Environmentally Friendly Refillable Pen. Contains 10 ml of No-Clean Low Solids Flux. Suitable for automotive, computer, telecom. For rework and touch-up of SMT, SMD, and through hole solder joints.More information #ad
| Brand | SRA Soldering Products #ad |
| Manufacturer | SRA #ad |
| Height | 0.3 Inches |
| Length | 5.4 Inches |
| Weight | 2 Pounds |
| Width | 1 Inches |
| Part Number | PEN-NC |
| Model | PEN-NC |
More information #ad
6. MG Chemicals
#adMG Chemicals 836-P No Clean Flux Pen, 10mL
#adMore information #ad
| Brand | MG Chemicals #ad |
| Manufacturer | MG Chemicals #ad |
| Height | 5 Inches |
| Length | 1 Inches |
| Weight | 0 Pounds |
| Width | 1 Inches |
| Part Number | 836-P |
| Model | 836-P |
| Warranty | [email protected] |
More information #ad
7. Kester
#adKester 83-1000-0951 Low Solid No Clean Flux Pen, 0.33 fl. oz.
#adKester #ad - Classified as orl0 per J-STD-004. Improves soldering performance. Eliminates the need and expense of cleaning. Compliant to Bell core GR-78. Non-corrosive tack-free residues.More information #ad
| Brand | Kester #ad |
| Manufacturer | NTE Electronics, Inc. #ad |
| Height | 0.59 Inches |
| Length | 0.39 Inches |
| Weight | 2 ounces |
| Width | 0.59 Inches |
| Part Number | 83-1000-0951 |
| Model | 83-1000-0951 |
More information #ad
