As an Amazon Associate I earn from qualifying purchases.
EVIL ENERGY #ad - Professional installation is highly recommended. Id: 5/16". Any problem you might have, please feel free to contact us via Amazon message. 6 ptfe stainless steel braided fuel line relatively hard, it can't be bend and folding in half.
Max working pressure: 3000 psi. Working temperature range: -76℉ to 446℉ -60℃ to 230℃. Evil energy provide 6an ptfe fuel hose fitting kit 3-month warranty.
Vincos #ad - Perfect racing fittings for fuel injection use. Length:20 ft, universal accessory, inner diameter: 8. 13 mm 032", outside Diameter: 1092 mm 043", easy to Operate. Good quality and durability, working temperature: -60f to 500f -60°c to + 260°C under most operating conditions; Working Pressure:3000 PSI - Burst Pressure: 10000 PSI.
Spectre #ad - Inner ply of braided cord. High-quality nitrile rubber hose. 304 grade stainless steel braid. Jacketed with hypalon for durability. 5/16 inch by 6 foot long hose.
NEW DAFU #ad - The package includes:1×5 feet1. 5m 5/16" 8mm id fuel line, the dimensions of the two parts are compatible with each other, 6 × 1/2" id 65 Manganese steel spring hose clamps, You can use them directly without additional purchases. For use in motorcycle mowers tractors snow blowers dirt bikes and all small engines, Use hose and clamps, transfer of petroleum products fuel lines for small engines.
Our fuel line's main material is: nbr copolymer of butadiene and acrylonitrile, which makes our fuel line more resistant to high/low temperature - 30 °C~120 °C and aging compared with other common fuel lines, It will not crack and its performance ↑ 50%.
The thickened tube makes you feel at ease, which increases the working pressure 300PSI / 2MPa and the maximum burst pressure 1200psi / 8MPa;3. The inner layer is nBR, which can increase oil resistance, No worries about leakage. The service life can be up to 9 years, no matter what questions you have, 3 times more than the other ordinary fuel lines, And keep good working condition, so the fuel line will not leak under any circumstances, Don't worry about your vehicle, We will always support you.
EVIL ENERGY #ad - Applicable medium: all automotive fuels, lubricants, and coolants. Bursting pressure: 10000psi. Ptfe hose relatively hard, it can't be bend and folding in half. Od: 0465inch. Length: 10 feet. Max working Pressure: 3000 psi.
EVIL ENERGY #ad - Maximum working pressure: 3000 psi. Id: 5/16". Professional installation is highly recommended. Please measure before purchase! Includes: as shown in the picture. Applicable medium: all automotive fuels, lubricants, and coolants.
CNRAQR #ad - High quality material - this hose features an ptfe inner layer which is compatible with e85, wrapped by a single layer of stainless steel And Nylon. Our braided fuel line is also an excellent alternative to conventional fuel lines. Free cutting size - the fuel line is 10 feet / 3.
1 m, can be cut to size for all your applications. The fuel line has good Retardancy And Excellent Corrosion Resistance. Best for the brake system, turbo Cooler System, Oil Cooler Kit, Fuel Pump, Ect. Corrosion & pressure resistance - the braided fuel line can stand -76℉ to 446℉ -60℃ to 230℃, oil return, fuel return system, and transmission System, fuel filter, Maximum Working Pressure Psi: 2000 Psi.
Bursting pressure Psi: 6000psi. Recommended to Use Adjustable AN Wrench. If you have any questions, Please Contact us in Time To Provide Quality Service. Ptfe fuel line holds up a lot stronger To Heat And Extreme Circumstances Than The Nylon Braided Fuel Line. Strong applicability - the fuel line specially designed to compatible with petrol, Fuel, Pump Gas, E85, Hydraulic Fluid, Coolant, Oil, Alcohol, Diesel, And Etc，Widely Used In Fuel System, Transmission System And Cooler System.
Vincos #ad - Braided fuel hose with special hand feel. Premium synthetic hose, nylon and stainless steel wires, good quality and durability, working Temperature: -40F to 248F -40°C to + 120°C under most operating conditions; Working Pressure:1015 PSI - Burst Pressure: 6090 PSI.
1. EVIL ENERGY
#adEVIL ENERGY 6AN PTFE Fuel Line Kit,AN6 E85 Stainless Steel Braided Hose 16FT5/16Inch ID
#adMax working pressure: 3000 psi. Working temperature range: -76℉ to 446℉ -60℃ to 230℃. Evil energy provide 6an ptfe fuel hose fitting kit 3-month warranty.
More information #ad
Applicable medium:6an e85 fuel line works with all automotive fuels, lubricants, and coolants. Please measure before purchase! Includes: as shown in the picture. Bursting pressure: 10000psi. An6 ptfe fuel line fitting kit is ideal for high temperature and high pressure applications. Od: 043inch. Length: 16 feet.| Brand | EVIL ENERGY #ad |
| Manufacturer | Speedwow Tuning #ad |
| Weight | 2.54 Pounds |
| Part Number | FBA-KT00467SR |
More information #ad
2. Vincos
#ad20 Ft 6AN AN6 5/16" Universal Braided Stainless Steel PTFE TEFLON Oil Fuel Gas Line Hose
#adMore information #ad
Braided fuel hose with special hand feel. Application for racing fuel, fuels with Ethanol, Pump Gas, alcohol Based Fuels, Motor Oil & Coolant etc.| Brand | Vincos #ad |
| Manufacturer | Vincos #ad |
| Part Number | 191322 |
More information #ad
3. Spectre
#adSpectre Performance 29306 5/16" x 6' Stainless Steel Flex Fuel Line
#adMore information #ad
| Brand | Spectre #ad |
| Manufacturer | Spectre #ad |
| Height | 1 Inches |
| Length | 12 Inches |
| Weight | 0.9 Pounds |
| Width | 11 Inches |
| Part Number | 29306 |
| Model | 29306 |
| Warranty | 3 Months |
More information #ad
4. NEW DAFU
#adNEW DAFU 5/16 Inch 8mm ID NBR Nylon Braided Fuel Line Set,5 Ft＋6 Pcs 1/2 Inch ID Hose Clamps,For Motorcycle Kawasaki Kohler Briggs Stratton Small Engines,Boat Marine Outboard Gas Diesel Petrol
#adOur fuel line's main material is: nbr copolymer of butadiene and acrylonitrile, which makes our fuel line more resistant to high/low temperature - 30 °C~120 °C and aging compared with other common fuel lines, It will not crack and its performance ↑ 50%.
More information #ad
No matter in extremely cold areas or high temperature desert, It will always accompany your vehicle to arrive the destination safely. Wall thickness is 3mm:contains 3 layers of material:1. The outer layer is chloroprene rubber with good elasticity;2. The middle layer is Nylon Braided, acid and alkali resistance, and resist various corrosive liquids. The thickened tube makes you feel at ease, which increases the working pressure 300PSI / 2MPa and the maximum burst pressure 1200psi / 8MPa;3. The inner layer is nBR, which can increase oil resistance, No worries about leakage. The service life can be up to 9 years, no matter what questions you have, 3 times more than the other ordinary fuel lines, And keep good working condition, so the fuel line will not leak under any circumstances, Don't worry about your vehicle, We will always support you.
| Brand | NEW DAFU #ad |
| Manufacturer | NEW DAFU #ad |
| Height | 1.5 Inches |
| Length | 9.2 Inches |
| Weight | 0.4 Pounds |
| Width | 7.9 Inches |
| Model | NEW DAFU Fuel/Gas Line 8mm |
More information #ad
5. EVIL ENERGY
#adEVIL ENERGY 6AN PTFE E85 Fuel Line Hose Nylon Braided 10FT Black5/16 Inch ID
#adMore information #ad
Id: 5/16". Professional installation is highly recommended. Working temperature range: -76℉ to 446℉ -60℃ to 230℃. Please measure before purchase! ptfe fuel line can be used as fuel injection hose, fuel supply line, carb fuel line, boost line, ls engine swap fuel line, fuel return line, vapor return line, etc.| Brand | EVIL ENERGY #ad |
| Manufacturer | Speedwow Tuning #ad |
| Part Number | KT01451AN6BK-3-AMZ1 |
More information #ad
6. EVIL ENERGY
#adEVIL ENERGY 6AN PTFE Fuel Line Fitting Kit,E85 Stainless Steel Braided Fuel Hose 10FT5/16Inch ID
#adMore information #ad
Working temperature range: -76℉ to 446℉ -60℃ to 230℃. Od: 0433inch. Length: 10 feet. Bursting pressure: 10000psi. Ptfe hose relatively hard, it can't be bend and folding in half. Ptfe stainless steel braided fuel lines are ideal for high temperature and high pressure applications.| Brand | EVIL ENERGY #ad |
| Manufacturer | Speedwow Tuning #ad |
| Weight | 1.76 Pounds |
| Part Number | KT00615AN6SR-HW |
More information #ad
7. CNRAQR
#adCNRAQR 6AN E85 Fuel Injection line Hose 10FT Braided Nylon Stainless Steel Oil Gas Hose PTFE 5/16 Inch
#ad1 m, can be cut to size for all your applications. The fuel line has good Retardancy And Excellent Corrosion Resistance. Best for the brake system, turbo Cooler System, Oil Cooler Kit, Fuel Pump, Ect. Corrosion & pressure resistance - the braided fuel line can stand -76℉ to 446℉ -60℃ to 230℃, oil return, fuel return system, and transmission System, fuel filter, Maximum Working Pressure Psi: 2000 Psi.
More information #ad
These lines do not deteriorate or swell Over Time Due To E85 Use Like Non-Ptfe Fuel Line. Professional service - professional installation is highly Recommended. Bursting pressure Psi: 6000psi. Recommended to Use Adjustable AN Wrench. If you have any questions, Please Contact us in Time To Provide Quality Service. Ptfe fuel line holds up a lot stronger To Heat And Extreme Circumstances Than The Nylon Braided Fuel Line. Strong applicability - the fuel line specially designed to compatible with petrol, Fuel, Pump Gas, E85, Hydraulic Fluid, Coolant, Oil, Alcohol, Diesel, And Etc，Widely Used In Fuel System, Transmission System And Cooler System.
| Brand | CNRAQR #ad |
| Manufacturer | CNRAQR #ad |
More information #ad
8. Vincos
#ad15 Ft 6AN ID 10AN OD Universal Braided Stainless Steel CPE Oil Fuel Gas Line Hose Fit
#adMore information #ad
Perfect racing fittings for fuel injection use. Application for racing fuel, fuels with Ethanol, Alcohol Based Fuels, Pump Gas, Motor Oil & Coolant etc. Length:15 ft, outside diameter: 13. 89mm 0547", universal Accessory, Inner Diameter: 8. 7mm 0343", easy to Operate.| Brand | Vincos #ad |
| Manufacturer | PartsSquare #ad |
| Height | 9.45 Inches |
| Length | 9.45 Inches |
| Weight | 2.02 Pounds |
| Width | 1.97 Inches |
| Part Number | 191319 |
| Model | 191319 |
More information #ad
