Top 8 Chassis Saver Gloss Black – Automotive Body Paint

As an Amazon Associate I earn from qualifying purchases.

1. Magnet Paint

#ad

1 Gallon, Magnet Paint UCP99-01 Chassis Saver Rust Preventative Paint Gloss Black

#ad
Magnet Paint #ad - Unafftected by other substances - this formula is unstoppable! Chassis Saver is unchanged by diesel fuel, hydraulic fluids, road salt, corrosives, battery acids, gasoline, solvents, oils, or chemicals. General maintenance - the ucp99 gloss black is the industry’s standard in high performance rust guard.

Chassis paint finish wont crack, or peel. Committed to total statisfaction - under the harshest condition, Chassis Saver has proven itself for over 10 years! Over 350 townships, local DOT fleet maintenance and public works departments use Chassis Saver. Protects from hard weather; snow, mud, flake, chip, rain, and dirt. Easy to apply - make contact directly to rust spots or places to protect against rust; only requires minimal surface preparation using a wire brush; no hardeners, primers, topcoats, activators required.

Active guarding - proactively shields vintage trucks and automobiles underbody surfaces including frames, under fenders, floorboards, fire walls, engine compartments, trunk areas, rocker panels, behind bumpers, etc.
BrandMagnet Paint #ad
ManufacturerMagnet Paint Co #ad
Height7.7 Inches
Length6.7 Inches
Weight10 Pounds
Width6.7 Inches
Part NumberUCP99-01
ModelUCP99-01

2. Magnet Paint & Shellac

#ad

Magnet Paint Co Gloss Black Chassis SAVER1/2PT MPC-UCP99-16

#ad
Magnet Paint & Shellac #ad - It works by isolating metal from oxygen and moisture, and without these factors present. Chassis saver cures by reacting with atmospheric moisture and its cured film resembles that of a catalyzed finish yet no hardeners or activators are used.

Chassis saver is a high solids, voc compliant, single component chassis paint and underbody coating specially formulated to permanently stop automotive and truck corrosion without the use of primers or topcoats. Chassis saver’s unique rust stopping properties permit its application directly over tightly adhered rust after only marginal surface preparation using a wire brush and/or hand scraper to remove loose scale and rust particulate.

Chassis saver bonds to blasted and rusty metal to form a rock hard yet flexible, glaze-like, chip, non-porous finish that won’t crack, flake or peel. Optimum results can be achieved by sandblasting a medium blast profile to surfaces.
BrandMagnet Paint & Shellac #ad
ManufacturerMagnet Paint & Shellac #ad
Height3 Inches
Length2.9 Inches
Weight0.5 Pounds
Width2.9 Inches
Part NumberUCP99-16
ModelUCP99-16

3. POR-15

#ad

POR 15 45032, 1 4oz Can Gloss Black Rust Preventative Paint 45006

#ad
POR-15 #ad - Single component permanent moisture cured urethane. Heat resistant up to 450F / 232C. Completely waterproof. Uses: automotive, industrial, marine, and home. Por-45032. Self-leveling when applied with a brush. Eliminates the need for a sacrificial zinc primer system. Does not crack, chip, or peel from the surface substrate. Paint. Effectively adapts to the expansion and shrinkage of surface caused by temperature changes. Protects your investment. Abrasion chemical, stain, and impact resistant. Absolute coating, Rust Preventive, gloss black, 4 oz.
BrandPOR-15 #ad
ManufacturerPOR-15 #ad
Height2.8 Inches
Length2 Inches
Width2.8 Inches
Part Number45032
Model8542051062

4. KBS Coatings

#ad

KBS Coatings 8401 Gloss Black BlackTop Chassis Paint, 1 Quart

#ad
KBS Coatings #ad - Highly abrasion resistant and chemical resistant. Blacktop is a permanent, moisture-cured, UV stable coating primarily used for topcoating surfaces previously sealed with RustSeal or any other paint/primer application. Blacktop can be brushed, sprayed or rolled! The brush marks flow out and level! Rock hard permanent topcoat. Withstands high temperatures - 500F. Flexible coating which expands and contracts. Blacktop is a high performance protective coating specifically formulated to withstand dulling and fading caused by prolonged sunlight exposure.
BrandKBS Coatings #ad
ManufacturerKBS Coatings #ad
Height4.8 Inches
Length4.2 Inches
Weight2.35 Pounds
Width4.3 Inches
Part Number8401
Model8401

5. POR-15

#ad

POR-15 45408 Rust Preventive Coating Semi-Gloss Black, 1 pint

#ad
POR-15 #ad - Professional Use. No need to remove Rust Before Applying. For metal Substrates. Seals Rust Permanently. Lead-Free.
BrandPOR-15 #ad
ManufacturerPOR-15 #ad
Height4 Inches
Length4 Inches
Weight1.17 Pounds
Width4 Inches
Part Number45408
Model45408
WarrantyAs labelled

6. Eastwood

#ad

Eastwood Extreme Chassis Black Satin Aerosol 14 OZ Improves Corrosion Resistant

#ad
Eastwood #ad - Eastwood extreme chassis Black Satin Aerosol 14 OZ Improves Corrosion Resistant. Apply multiple coats without lifting. Helps seal rust and improves resistance against chips and scratches. Matches OEM automotive paint. 85% + gloss Level.
BrandEastwood #ad
ManufacturerEastwood #ad
Weight1.13 Pounds
Part Number11175Z

7. POR-15

#ad

4 fl. oz., Pack of 6, POR-15 45006-6PK Gloss Black Rust Preventive Coating

#ad
POR-15 #ad - Rust preventive paint protects your investment. Heat resistant up to 450F / 232C. Absolute coatings. Does not crack, chip or peel from the surface substrate. No need for a sacrificial zinc primer.
BrandPOR-15 #ad
ManufacturerPOR-15 #ad
Height0.98 Inches
Length2.95 Inches
Weight2.23 Pounds
Width1.97 Inches
Part Number45006
Model45006

8. POR-15

#ad

POR-15 45801 Top Coat Gloss Black Paint 128. Fluid_Ounces

#ad
POR-15 #ad - Uv resistant. Use over por-15 Rust Preventive. No need for Primer or Undercoat. Direct to metal DTM Rust Preventive Paint.
BrandPOR-15 #ad
ManufacturerPOR-15 #ad
Height2.95 Inches
Length2.56 Inches
Weight8.1 Pounds
Width2.56 Inches
Part Number45801
Model45801