Top 8 Sequoia Rear Shock – Automotive Replacement Shock Lift Supports

As an Amazon Associate I earn from qualifying purchases.

1. A-Premium

#ad

A-Premium Tailgate Rear Hatch Lift Supports Shock Struts Replacement for Toyota Sequoia 2001-2007 2-PC Set

#ad
A-Premium #ad - Fits toyota  sequoia 2001-2007. Location: tailgate, Rear Left and Right. 1 year unlimited-mileage quality guarantee. Oe replacement lift supports, easy fit. Reference number: sg129031, 4995.
BrandA-Premium #ad
ManufacturerPremiumpartsWhosale #ad
Part NumberGS337
WarrantyOne Year Unlimited Mileage Quality Guarantee. The guarantee will be only for the cost of the item, we will not responsible for installation or other fees like labor expenses, towing expenses, additional repair expenses or other related expenses.

2. ARANA

#ad

4995 Gas Charged Liftgate Lift Support for 2001-2007 Toyota Sequoia,Set of 2

#ad
ARANA #ad - Exact fit original equipment design ensures easy installation and precise operation. Perfect fits 01-07 Toyota Sequoia. Vehicle location: Liftgate. Extended length a in:27. 88, compressed Length B in:19. 63, stroke C in:8. 25. Interchange number: 4995. 2 pieces per package, direct replacement for your worn-out original lift support kits! .
BrandARANA #ad
ManufacturerARANA #ad
Part Numberarana-00103

3. DRIVE TECH AMERICA

#ad

DTA 70097A Full Set 2 Front Complete Struts with Springs and Mounts + 2 Rear Shocks 4-pc Set Compatible with 2001-2002 Sequoia

#ad
DRIVE TECH AMERICA #ad - The strut is nitrogen gas charged with 4 Lip Teflon banded Piston Seal, micro polished chrome plated piston rod and all weather SV3 fluid. Neoprene boots and bump stops when applicable. Guranteed fit and function. Coil spring is heated treated & powder coated to ensure longevity and protection from Corrosion. Fully loaded complete unit is safe and easy to install. Spring seats insulated to springs to ensure quiet and comfortable ride quality.
BrandDRIVE TECH AMERICA #ad
ManufacturerDRIVE TECH AMERICA #ad
Part Number70097A
WarrantyDTA warrants that the products are free from defects in material and workmanship for the lifetime of the ownership of the vehicle. DTA¡¯s warranty covers part only, does not cover any labor cost or any other cost incurred due to the failure of the part. DTA¡¯s product liability is strictly limited to the replacement of the unit once DTA has determined it to be defective. DTA¡¯s warranty is voided if the product is installed in a vehicle that has been modified. DTA¡¯s warranty is voided if the part has been altered, damaged, misused or improperly installed.

4. Lift Supports Depot

#ad

Qty 2 Fits Sequoia 2009 To 2018 Liftgate Hatch Tailgate Lift Supports With Power Gate

#ad
Lift Supports Depot #ad - Installs easy with no special tools required. Lift supports depot supports are High Quality European Lift Struts. Designed to install easily in minutes, often times without special tools. Extended length from center Mount to Center Mount is 27. 17 in. This listing includes 2 Lift Supports For the Liftgate. Compatible with the following oem numbers:318, 689070c020, 689080c020, 689080c021, 68908-0c021, 689080c010, 689070c021, 689070C010, 68907-0c021, PM3173.
BrandLift Supports Depot #ad
ManufacturerLift Supports Depot #ad
Height2 Inches
Length27.17 Inches
Width2 Inches
Part NumberPM3173

5. KYB

#ad

KYB 344358 Excel-G Gas Shock, Silver, Black

#ad
KYB #ad - Triple chrome plated piston rod and multi-lip oil seals that reduce wear. Uses a seamless working cylinder matched with a Teflon coated piston band for a positive seal and longer life. Solid seamless mounting eye rings and bolt bushings to eliminate rattles. Specifically calibrated to help restore the original handling and control characteristics of the Toyota Sequoia. 1 recommended original Equipment replacement choice for Asian SUVs.
BrandKYB #ad
ManufacturerKYB #ad
Height0 Inches
Length0 Inches
Width0 Inches
Part Number344358
Model344358
WarrantyKYB Limited Warranty warrants to the original retail purchaser that each new KYB product purchased from an authorized KYB dealer shall be free from defects for the specific periods listed below, when used on private passenger vehicles and light trucks for personal use under normal operating conditions. Warranty Period A. lifetime: All KYB Shocks Absorbers, Struts, and Strut Cartridges (Except KYB Strut-Plus TM, Air, Electric or Self Leveling). Note: lifetime means for as long as the original retail purchaser owns the vehicle on which KYB products were originally installed. B. One(1) Year: All KYB Strut-Plus, KYB Strut Mounts, Boots and Steering Stabilizers. What is Covered by this Warranty? The warranty covers defect in material and workmanship in the KYB product. KYB's sole and exclusive obligation under this warranty is limited to the exchange / replacement of a defective KYB product in accordance with this limited warranty. A valid copy of the original dated retail prooof of purchase receipt must accompany any warranty claim. Please Refer to the KYB Limited warranty for further details.

6. QiMox

#ad

Qty 2 QiMox Rear Liftgate Hatch Tailgate Struts Lift Supports Shocks Compatible With 2001 2002 2003 2004 2005 2006 2007 Toyota Sequoia

#ad
QiMox #ad - Easy to install with simple hand tools in just minutes. Extended length:27. 88" compressed Length:19. 63". Meets or exceeds oeM manufactures specification, Easy lifting, reduced closing effort. Placement on Vehicle: Liftgate. Please carefully read the title to insure you are ordering in the correct supports & Quantity.
BrandQiMox #ad
ManufacturerQiMox #ad
Part NumberK90-0186

7. Rugged TUFF

#ad

Rugged TUFF Rear Liftgate Hatch Shocks Lift Supports Replacement For Toyota Sequoia 2001 2002 2003 2004 2005 2006 2007 RT261054 SG129031 15030 Pack of 2

#ad
Rugged TUFF #ad - Rust-resistant piston rod extends product life. Specification: extended length: 27. 87", compressed Length: 19. 63". Quantity: 2pc; placement: Rear Liftgate Hatch Shocks Lift Supports. We provide one year warraNTY for all our lift supports. Brand guarantee: please check the description and compatibility chart before your purchasing. Cross reference number: 014297, 0362bk, gp310200, 976319, 68905-09020, 8196191, c16-15030, 689050c040b, 689050c020b, 7458uj, 6890509025, 68905-09025, 8583sj, 68905-0c040b, c1615030, SG129031. Easy fit & removal: easy to install, no special tools required.
BrandRugged TUFF #ad
ManufacturerRugged TUFF Lift Supports #ad
Part NumberRT261054

8. BuyAutoParts

#ad

BuyAutoParts 77-69649G4 New, For Toyota Sequoia 2001-2007 Monroe Front Rear Shocks Struts

#ad
BuyAutoParts #ad - The high-carbon steel and premium components that go into premium Monroe shocks, struts and strut assemblies make each one a top-quality product. The strict performance standards at monroe, with their OE expertise, ensures OE-quality fit and function from each individual component as well as how the finished parts work together once installed. Monroe products are designed, fit and ride checked, engineered, and built with each vehicle specific ride and handling profile in-mind. One year, 1 x monroe 171348r, unlimited-mileage warranty. 1 x monroe 171348l, 2 x Monroe 37240 .
BrandBuyAutoParts #ad
ManufacturerBuyAutoParts #ad
Height10 Inches
Length30 Inches
Width20 Inches
Part Number77-69649G4