As an Amazon Associate I earn from qualifying purchases.
1. UCTRONICS #ad
GPS, UCTRONICS DC 12V Time Delay Relay Module for Smart Home, Tachograph, PLC Control, Electronic Experiment, Arduino Robot, Industrial Control #adUCTRONICS #ad
- Wide range of applications: timing relay control module can be used in the Smart home, PLC control, electronic experiment, industrial control, tachograph, GPS, Arduino robot etc. Capacity to control large current: DC 0-30V/10A, AC 0-250V/10A.
The new digital display: this product is a new digital display using 12v delay module can be widely used in a variety of control switch position. High safety performance: With protection against reversal diode, better protection while wrong connection. Detailed instructions.
2. Aharon #ad
Time Delay Relay 10 seconds 5 pin 12V 30A 5 pin SPDT #adAharon #ad
- This relay fits most common single or dual beam HID wiring harnesses for an easy fix to prevent HID from starting before cranking the engine. Relays are contact rated at 30A @ 14 VDC, and sealed for waterproof operation.
10 second delay before switching On. Not only suitable for hid, can be used in any 5 pin relay harness, like for the oil pump. Avoid those pesky ignition errors, flickering/fluttering HID, and needless wear and tear on ballasts. Here is the answer, a time delay relay.
3. ICM Controls #ad
2" Width 2" Length, ICM Controls ICM203 Delay on Break Timer, 1.25" Height, 18-240 Vac #adICM Controls #ad
- Compressor lockout/anti-short cycle timer. Simple, 2-wire hookup. Adjustable timing. Helps to protect compressors from damage caused by rapid short cycling. Universal voltage.
|Brand||ICM Controls #ad|
|Manufacturer||Icm Controls #ad|
4. iJDMTOY #ad
5-Pin 12V 30A SPDT, Compatible With Automotive Lighting, iJDMTOY 1 10-Second Time Delay Relay Module #adiJDMTOY #ad
- Good for car/motorcycle retrofit lights that do not have switch or want to delay the turn-on time to protect the battery or circuit/fuse, LED work lights, HID system, perfect for high power lighting applications such as LED light bar, etc.
This is an ijdmtoy trademark Brand product, exclusively available at iJDMTOY.
Allow a fixed 10 seconds delay to turn on the light. Direct replacement since this relay is polar sensitive, if it does not respond, please try to flip the triggering wires around Demo Video: youtu. Be/domvz62CmcQ. 1 piece 5-pin 12v 30a spdt cube-style relay size: 1. 65" x 1. 25" x 1. 25".
5. HiLetgo #ad
HiLetgo NE555 DC 12V Delay Timer Switch Adjustable Module 0 to 10 Second #adHiLetgo #ad
- Can be controlled ac 250v/10a /dc 0~30v/max. 10a equipment. Maximum control equipment 2000W. The potentiometer to adjust the output frequency.
With input power indicator, with the relay is energized light. The delay time is adjustable 0-10 seconds, delay turn on. Main chip:ne555; operating voltage: 12V DC.
6. DROK #ad
12 Volt Timer Relay, Cycle Time Delay Module with LED Display, Electric Delay Timer Switch, DROK 0.1s to 999min 50mA 4-Mode On-Off Automotive Digital Delay Relay #adDROK #ad
- Strong anti-interference ability: The output of digital timer relay adopts optocoupler isolation, which enhances the capacity of resisting disturbance power consumption. 4 mode time delay relay: drok 12v relay is provided with 4 different settings and supports various triggering signal source, like positive side of power supply triggering, Button, PNP sensor, PLC signal, which is available for most of applications.
Super simple operation: our relay board is operated by buttons and the delay module is equipped with LED digital display which is convenient for you to check the set value.
Automatic saving function: after you finish the setting, you can cut off the power and then the parameters will be saved automatically, handy and convenient. Wide adjustable timing range: this off delay relay supports widest timing range, 01 seconds to 999 minutes adjustable, which can fulfilled your various need.
7. Dinosaur Electronics #ad
Dinosaur Electronics TDR Time Delay Relay #adDinosaur Electronics #ad
- 12 volt dc operation, the time delay relay is used in old furnaces. Size; 1. 5 inches x 1. 5 inches.
8. XLX #ad
XLX 5PCS 12V NE555 0-10 Seconds Delay Module Constant Current Regulator High Power High Efficiency Timer Delay on Monostable Delay Switch Converter for Automotive Control System Electrical Equipment #adXLX #ad
- A wide range of applications: the adjustable timer switch relay module is designed with relay module continuous current flow protection. High reliability, strong vibration resistance, good electromechanical performance. Package including: 5 pack of upgraded delay module, high frequency filter capacitor and with input power indicator, which consist of high-precision potentiometer adjust the output frequency.
With the relay is energized light. Ne555 chip features: timing from microseconds to long hours, adjustable duty cycle, wide application range, simple circuit design, high pulse generation / timing accuracy, large amount of information.
Super material: it is made of electronic accessories, inner conductor is pure copper.
The timer switch relay module can be adjustable timer delaydefault setting:0-10s and counter clockwise adjustment of potentiometer to increase delay time. High power high efficiency: 12v module. This module is perfect for SCM learning, electronic competition, product development, graduation design and so on. The output can be connected to ac 250v 10a and dc 0-30v/max. 10a equipment, and the max control equipment is up to 2200W. It is long lasting and durable for you to use.