As an Amazon Associate I earn from qualifying purchases.
TotalBoat #ad - Easy to sand and paint: quick-drying compound is ready to sand in just 3 hours at 80°F; cured fairing compound sands easily; compatible with latex and epoxy primers and paints. Cures fast. Note: totalboat gelcoat should not be applied directly over TotalFair or gelcoat will not cure properly.
Choose kit size: 2-pint kit, 2-quart kit or 1-gallon kit. Creamy smooth consistency makes it easy to spread and feather to a fine edge; won't sag on vertical and overhead surfaces. High-strength, lightweight two-part epoxy filler smooths out the rough spots and fills the voids; ideal for filling and fairing dents, canoe or other watercraft.
Before applying gelcoat, apply TotalBoat 2-Part Epoxy Primer or TotalProtect over TotalFair. Marine-grade putty is also great for home, holes and gouges on your boat, rv and auto repair. Easy to mix and apply: foolproof 1 to 1 mix ratio - just mix the blue and yellow components until they turn green.
Evercoat #ad - About evercoat: we lead the industry in the use of “green” technology and manufacture in the USA. Two-part putty: polyester finishing and blending putty to be used alone or with METALWORKS products.
1. Evercoat
#adEvercoat 865 SMC Fiberglass Resin, 1 Gallon
#adEvercoat #ad - Automotive body repair: We provide high-quality putty, primer, and body filler formulations. Suggested use: this fiberglass resin must be used with a fiberglass mat or cloth. Sheet molded compound resin: Polyester-based resin for repair of SMC and fiberglass panels and parts.More information #ad
Waterproof resin: Impact-resistant and waterproof resin delivers long-lasting results. Versatile surfaces application: Our products are applicable on soft woods, fiberglass, and more.| Brand | Evercoat #ad |
| Manufacturer | Evercoat #ad |
| Height | 10.5 Inches |
| Length | 4.25 Inches |
| Weight | 0.5 Pounds |
| Width | 6.75 Inches |
| Part Number | 865 |
| Model | 865 |
More information #ad
2. Evercoat
#adEvercoat 125 Rage Ultra Body Filler, 0.8 Gallon
#adEvercoat #ad - Its non-sag formula has excellent filling properties, while eliminating the need for finishing putty. Rage ultra is the world's best sanding body filler. Its unparalleled sanding qualities are a result of the patent pending formula that contains renewable technology.More information #ad
| Brand | Evercoat #ad |
| Manufacturer | Evercoat #ad |
| Height | 7.5 Inches |
| Length | 6.5 Inches |
| Weight | 9.5 Pounds |
| Width | 6.5 Inches |
| Part Number | 100125 |
| Model | 125 |
More information #ad
3. Evercoat
#adFibreglass Evercoat 632 Everglass Short Strand Fiber Reinforced Filler, Quart
#adEvercoat #ad - Contains a combination of short strand fibers and Kevlar for superior strength, durability, and prevention of stress cracks in high stress areas. Hardener comes along with the product.More information #ad
Zinc compatible with znx-7 for the ultimate in adhesion and corrosion resistance over steel, galvanized steel and aluminum. Rustproof and waterproof. Thermal co-efficiency offers tremendous ability to prevent repair mapping. Can be used over metal and rigid plastics.| Brand | Evercoat #ad |
| Manufacturer | Evercoat #ad |
| Height | 4.2 Inches |
| Length | 4.2 Inches |
| Weight | 1 Pounds |
| Width | 4.7 Inches |
| Part Number | 100632 |
| Model | 632 |
| Warranty | LIMITED WARRANTY |
More information #ad
4. Evercoat
#adQuart, Evercoat Fibreglass 870 Vette Panel Adhesive/Filler
#adEvercoat #ad - When used in conjunction with fiber tech or evERGLASS, provides optimal performance of the repair system, reducing cracking, repair mapping and bond line swelling. Reduces risk of shrinkage that can cause halos and repair mapping.More information #ad
Specially designed to mimic the same degree of expansion and contraction of SMC, reducing cracking in high stress areas. Sands at the same rate as SMC, reducing undercutting of SMC edges and insuring excellent feather-edging capabilities. Finish sands to a finishable quality, no need to apply a lightweight filler.| Brand | Evercoat #ad |
| Manufacturer | Fibreglass Evercoat #ad |
| Height | 4.2 Inches |
| Length | 4.2 Inches |
| Weight | 3.5 Pounds |
| Width | 4.7 Inches |
| Part Number | 870 |
| Model | 870 |
More information #ad
5. Evercoat
#ad4 oz. Keg, Blue, Fibreglass Evercoat 359 Cream Hardener
#adEvercoat #ad - Also used with specialty fillers and polyester finishing putties. Package dimensions: 2. 921 l x 13. 335 h x 5. 461 w centimeters. Flash point: 84. 0 Part number: 359.More information #ad
| Brand | Evercoat #ad |
| Manufacturer | Fibreglass Evercoat #ad |
| Height | 14 Inches |
| Length | 7.4 Inches |
| Weight | 0.1 Pounds |
| Width | 8.8 Inches |
| Part Number | 359 |
| Model | FIB-359 |
More information #ad
6. U-Pol Products
#ad1.1 Liter, U-Pol Products 0777 Black SMC Fiber Reinforced Filler
#adU-Pol Products #ad - Contains carbon fiber for extra strength. Very high adhesion filler and adhesive for rigid plastics. Smooth spreading.More information #ad
| Brand | U-Pol Products #ad |
| Manufacturer | U-Pol Products #ad |
| Height | 4.13 Inches |
| Length | 6.3 Inches |
| Weight | 2.43 Pounds |
| Width | 6.3 Inches |
| Part Number | 0777 |
| Model | 0777 |
More information #ad
7. TotalBoat
#adAluminum and Steel 2 Pint Kit, TotalBoat-434282 TotalFair Marine Epoxy Fairing Compound for Fiberglass, Wood
#adChoose kit size: 2-pint kit, 2-quart kit or 1-gallon kit. Creamy smooth consistency makes it easy to spread and feather to a fine edge; won't sag on vertical and overhead surfaces. High-strength, lightweight two-part epoxy filler smooths out the rough spots and fills the voids; ideal for filling and fairing dents, canoe or other watercraft.
More information #ad
Super smooth finish for permanent, waterproof repairs: marine filler bonds strongly to damaged areas and cures without pinholes on wood, aluminum, steel and fiberglass repair areas; cured TotalFair is waterproof; use above and below the waterline. Before applying gelcoat, apply TotalBoat 2-Part Epoxy Primer or TotalProtect over TotalFair. Marine-grade putty is also great for home, holes and gouges on your boat, rv and auto repair. Easy to mix and apply: foolproof 1 to 1 mix ratio - just mix the blue and yellow components until they turn green.
| Brand | TotalBoat #ad |
| Manufacturer | TotalBoat #ad |
| Part Number | 434282 |
More information #ad
8. Evercoat
#ad30 oz. Pumptainer, Fibreglass Evercoat 421 EASY SAND Flowable Polyester Finishing and Blending Putty
#adMore information #ad
Includes blue cream Hardener: Forms a nice consistency when mixed with hardener. Unique formula: fills grind marks, pinholes and uneven surfaces and skim coats body work. Superior adhesion: bonds with aluminum, galvanized steel, fiberglass, sanded body filler, etc.| Brand | Evercoat #ad |
| Manufacturer | Evercoat #ad |
| Height | 13.2 Inches |
| Length | 8.7 Inches |
| Weight | 2.2 Pounds |
| Width | 7 Inches |
| Part Number | 100421 |
| Model | 421 |
More information #ad
9. Evercoat
#ad1 Gallon, Evercoat 713 Gray Feather Fill G2 Primer
#adEvercoat #ad - A high-build, high-solids premium Polyester Primer Surfacer that is compliant with California and National Rule VOC regulations. It has been specifically developed to work with 1K and 2K etch primers, while offering exceptional flow and leveling.More information #ad
Other features include smooth spraying, easy sanding, fast dry-to-sand time and a shrink-resistant formula.| Brand | Evercoat #ad |
| Manufacturer | Evercoat #ad |
| Height | 7.5 Inches |
| Length | 6.5 Inches |
| Weight | 12 Pounds |
| Width | 6.5 Inches |
| Part Number | 100713 |
| Model | 713 |
More information #ad
