As an Amazon Associate I earn from qualifying purchases.
OCPTY #ad - Please check the product description and Amazon vehicle list carefully before purchasing, check your vehicles year/make/model/trim/engine or VIN to avoid purchase errors. Attention - our coilovers struts are perfectly matched to the original car. Improve driving stability - after installing the adjustable coilovers, the center of gravity of the car can be lowered closer to the ground and driving is more stable.
Fits the following vehicles - The Coilovers Struts fit for 2000-2005 for Toyota Celica. As the distance between the vehicle body and the ground is reduced and the wind resistance is reduced, the fuel consumption is also reduced, and the phenomenon of cornering and rolling is reduced to ensure safe driving.
Improve handling performance - we use shock absorption with higher quality materials to meet the shock absorption demand. We provide them with one year of after-sales service. The products pass the aging check and have a longer life. Enhance durability - the coilover suspension shock is made of high-quality materials, special surface treatment, and the durability is greatly improved.
Rev9 #ad - These coilovers are "lowering kit" and does not adjust to Factory Ride Height. Specially designed coil springs Over Shock Kit To Lower The Vehicle Proper Way.
No installation Instructions; Install By Experienced Professionals Recommended. Compatible with toyota celica fwd t200 1994 1995 1996 1997 1998 1999. Mono tube shock with steel alloy body and valving allows 32 clicks Rebound Force Adjustment; Independent Spring Tension And Ride Height Settings To Allow Stiffness And Ride Height To Be Adjusted Separately.
maXpeedingrods #ad - Lowering kits the height adjustable by 1-3 inches, allowing you to have a more aggressive stance. Plus, the special surface treatment is to improve the durability and performance. . 24 rebound force levels for more control level 0-8 suggest for race tracks use；Level 9-16 suggest for mountain anfractuosities use；Level 17-24 suggest for street use.
Twin-tube structure compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustability, and they will give you a more comfortable riding experience by reducing the pressure on the joints and also minimizing friction and ensuring sufficient travel with less effort.
Note: these coilovers struts will "Lower your car" and DOES NOT keep to original ride height. Hi tensile performance spring - Under 600, 000 times continuously test, the spring distortion is less than 004%. Spring rate front spring rate: 10 kg/mm 560 lbs/in & rear spring rate: 6kg/mm 336 lbs/in with spring preload: 7-10 mm. Fit perfectly for toyota celica gt gts fwD 1990 1991 1992 1993. You can adjust it at any time to suit your needs.
Godspeed #ad - Full 1 year limited warranty from Date Of Purchase; Install By Experienced Professionals Is Highly Recommended. Performance internal piston with koyo japan 6204z bearing provides smooth stroke; powder coated CNC Machined Aluminum And Carbon Steel Accessories; Independent Spring Tension And Height Adjustment; Racing Grade Shock Oil With High Viscosity Index; Shock Absorber Can Be Rebuild When Worn Out.
ZYauto #ad - This design helps eliminate turning noise and also improves steering feel and response. Note: these coilovers struts will "Lower your car" and DOES NOT keep to original ride height. Spring length front: 190mm & Coilover overall length Rear: 397mm-415mm.
Spring rate front spring rate: 12 kg/mm 672 lbs/in & spring length rear: 180mm; coilover overall length Front: 372mm-482mm & 8 kg/mm 448 lbs/in. Lowering kits the height adjustable by 1-3 inches, allowing you to have a more aggressive stance.
8 vvt-i ; 1. 8 vvtl-i 190 or t-sport 2000-2004. Twin-tube structure compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustability, and they will give you a more comfortable riding experience by reducing the pressure on the joints and also minimizing friction and ensuring sufficient travel with less effort. It is fully loaded and safe for installation.
maXpeedingrods #ad - No instruction included; Professional installation & alignment suggested. Super strong and significant improvement for drifting cars. Large range of adjustment while still allowing caster and camber to be adjusted from the top without cutting the strut tower.
ECCPP #ad - Professional installation recommended. You can according to personal needs to adjusted to personal satisfaction device within a certain range. Adjustable performance: 2 piece front 8kg/1, 2 pieces rear 6kg/1. Applicability: the coilover suspension struts fit for 1988 89 90 91 92 93 94 95 96 97 98 1999 Toyota Corolla.
Easily installed using the right tools. Advantage: the struts has an adjustable ride height, Adjustable camber plate and preload spring tension. Function: improve steering performance, reduce brake overshoot, prevent cornering understeer and oversteer, reduce cornering roll.
The coilover struts is able to Independently adjust lower mount allows precise adjustment of the vehicle's height without affecting the stroke. Improve braking performance, shorten braking distance, improve driving safety. Notification: our coilover shocks are specifically designed to provide smooth, safe rides and provide drivers with superior driving control, helping them find ride comfort and improved handling. Any questions about the product, please contact us in time.
Rigorous testing -- comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on. Restores ride -- provides revamped steering and handling feel.
maXpeedingrods #ad - Spring rate front spring rate: 8 kg/mm 448 lbs/in & spring length rear: 180mm; coilover overall length Front: 365mm-410mm & 5 kg/mm 280 lbs/in with spring preload: 7-10 mm. 24 rebound force levels level 0-8 suggest for race tracks use；Level 9-16 suggest for mountain anfractuosities use；Level 17-24 suggest for street use.
In addition, allowing you to have a more aggressive stance, we have adopted a deep groove ball bearing structure to help eliminate cornering noise and also improve steering feel and response. You can adjust it at any time to suit your needs. Spring length front: 180mm & Coilover overall length Rear: 435mm-480m.
Twin-tube structure compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustability, and they will give you a more comfortable riding experience by reducing the pressure on the joints and also minimizing friction and ensuring sufficient travel with less effort.
1. OCPTY
#adOCPTY Coilovers Suspension Lowering Kit Adjustable Height Full Coil Springs Struts Shock fit for 2000-2005 for Toyota Celica
#adFits the following vehicles - The Coilovers Struts fit for 2000-2005 for Toyota Celica. As the distance between the vehicle body and the ground is reduced and the wind resistance is reduced, the fuel consumption is also reduced, and the phenomenon of cornering and rolling is reduced to ensure safe driving.
More information #ad
When the support force of the coilover is higher, the swinging amplitude of the body is naturally lower, which enhances the tires grounding performance and improves the vehicle tracking, so the drivers handling experience becomes more intuitive. Improve handling performance - we use shock absorption with higher quality materials to meet the shock absorption demand. We provide them with one year of after-sales service. The products pass the aging check and have a longer life. Enhance durability - the coilover suspension shock is made of high-quality materials, special surface treatment, and the durability is greatly improved.
| Brand | OCPTY #ad |
| Manufacturer | OCPTY #ad |
| Height | 8.27 Inches |
| Length | 25.59 Inches |
| Weight | 49.89 Pounds |
| Width | 18.11 Inches |
| Part Number | 118987-5209-1424583091 |
| Model | 118987-5209-1424583091 |
More information #ad
2. Rev9
#adMono-Tube Shock w/ 32 Click Rebound Setting, Rev9 R9-HS2-120 Hyper-Street II Coilover Suspension Lowering Kit, Full Length Adjustable, compatible with Toyota Celica FWD T200 1994-99
#adNo installation Instructions; Install By Experienced Professionals Recommended. Compatible with toyota celica fwd t200 1994 1995 1996 1997 1998 1999. Mono tube shock with steel alloy body and valving allows 32 clicks Rebound Force Adjustment; Independent Spring Tension And Ride Height Settings To Allow Stiffness And Ride Height To Be Adjusted Separately.
More information #ad
Spring rate: front - 8 kg/mm | rear - 5 kg/mm // top mount: yes, Standard Top Mount | Yes, Standard Top Mount // Damping Levels: 32 Ways.| Brand | Rev9 #ad |
| Manufacturer | Rev9 #ad |
| Part Number | R9-HS2-120 |
| Warranty | Parts |
More information #ad
3. maXpeedingrods
#adAmortiguador Lowering Kits Pillow Ball Top Mounts, 24 Level Adjustable Damper Spring Shock Absorber Suspension Kit Strut, maXpeedingrods Coilover Adjustable for Toyota Celica GT GTS FWD 1990-1993
#adTwin-tube structure compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustability, and they will give you a more comfortable riding experience by reducing the pressure on the joints and also minimizing friction and ensuring sufficient travel with less effort.
More information #ad
This design helps eliminate turning noise and also improves steering feel and response. Note: these coilovers struts will "Lower your car" and DOES NOT keep to original ride height. Hi tensile performance spring - Under 600, 000 times continuously test, the spring distortion is less than 004%. Spring rate front spring rate: 10 kg/mm 560 lbs/in & rear spring rate: 6kg/mm 336 lbs/in with spring preload: 7-10 mm. Fit perfectly for toyota celica gt gts fwD 1990 1991 1992 1993. You can adjust it at any time to suit your needs.
| Brand | maXpeedingrods #ad |
| Manufacturer | maXpeedingrods #ad |
| Part Number | FA53BG |
More information #ad
4. Godspeed
#ad16-Clicks Damping Setting, Godspeed MSS0192 MonoSS Coilover Lowering Kit, Adjustable Ride Height, Improved Spring Rate, compatible with Toyota Celica T230 2000-06
#adMore information #ad
52mm mono-tube stainless steel shock with 16 Levels of Damping Adjustment Corresponds to Daily Driving Scene To The Sunday Track. Compatible with toyota celica t230 2000 2001 2002 2003 2004 2005 2006. Spring rate front/rear : 5 kg/mm 280 lbs/inch || 4 kg/mm 224 lbs/inch; Damping Levels: 16 Rebound Force Levels.| Brand | Godspeed #ad |
| Manufacturer | Godspeed #ad |
| Part Number | MSS0192 |
| Warranty | Parts Only |
More information #ad
5. ZYauto
#adCoilovers Adjustable Height for Toyota Celica 2000-2006 GT GTS ZZT230 ZZT231 1.8 VVT-i/1.8 VVTL-i 190/T-Sport 2000-2004, Amortiguador Spring Preload 7-10mm Red, Amortiguador Lowering Kits by 1-3”
#adSpring rate front spring rate: 12 kg/mm 672 lbs/in & spring length rear: 180mm; coilover overall length Front: 372mm-482mm & 8 kg/mm 448 lbs/in. Lowering kits the height adjustable by 1-3 inches, allowing you to have a more aggressive stance.
More information #ad
Excellent materialthe product comes with 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength and durability. Fit perfectly for toyota celica 2000-2006 gt gts zzt230 zzt231; for toyota celica 1. 8 vvt-i ; 1. 8 vvtl-i 190 or t-sport 2000-2004. Twin-tube structure compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustability, and they will give you a more comfortable riding experience by reducing the pressure on the joints and also minimizing friction and ensuring sufficient travel with less effort. It is fully loaded and safe for installation.
| Brand | ZYauto #ad |
| Manufacturer | ZYauto #ad |
| Part Number | [email protected] |
More information #ad
6. maXpeedingrods
#adMaXpeedingrods Adjustable Coilover Front Top Hat for Toyota Celica 2000-2006 Camber Plates
#adMore information #ad
Any question, feel free to contact us and we will reach you at the soonest. Fit for toyota celica 2000-2006. Important notice : normally, the package will ship from US stock, it will take 4-8 business days to arrive you, please ignore the Amazon arrive time and refer to the actual delivery time.| Brand | maXpeedingrods #ad |
| Manufacturer | maXpeedingrods #ad |
| Part Number | FBB7 |
More information #ad
7. ECCPP
#adCoilover Struts Spring Shocks Adjustable Height Coilovers Suspension Struts Coil Spring Shocks and Struts Full Set Kits ECCPP Fit for 1988 89 90 91 92 93 94 95 96 97 98 1999 Toyota Corolla
#adEasily installed using the right tools. Advantage: the struts has an adjustable ride height, Adjustable camber plate and preload spring tension. Function: improve steering performance, reduce brake overshoot, prevent cornering understeer and oversteer, reduce cornering roll.
More information #ad
Moderate bouncing, and high-comfortable shock adjustments which provide owners with positive road feedback without sacrificing too much comfort and a better ride experience. The coilover struts is able to Independently adjust lower mount allows precise adjustment of the vehicle's height without affecting the stroke. Improve braking performance, shorten braking distance, improve driving safety. Notification: our coilover shocks are specifically designed to provide smooth, safe rides and provide drivers with superior driving control, helping them find ride comfort and improved handling. Any questions about the product, please contact us in time.
| Brand | ECCPP #ad |
| Manufacturer | ECCPP #ad |
| Height | 8.07 Inches |
| Length | 29.92 Inches |
| Width | 17.72 Inches |
| Part Number | 118944-5211-1525395391 |
| Model | 118944-5211-1525395391 |
More information #ad
8. MOOG
#adMOOG Steering & Suspension K90309 Ball Joint,Black
#adMOOG #ad - Comprehensive coverage -- available for foreign and domestic nameplates. Strong and durable -- engineered to match or exceed OE requirements.Rigorous testing -- comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on. Restores ride -- provides revamped steering and handling feel.
More information #ad
Fit type: Vehicle Specific. Engineering excellence -- with 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose. Easy to install -- precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box.| Brand | MOOG #ad |
| Manufacturer | MOOG Chassis Products #ad |
| Height | 3.25 Inches |
| Length | 5.38 Inches |
| Weight | 1.65 Pounds |
| Width | 4 Inches |
| Part Number | K90309 |
| Model | K90309 |
More information #ad
9. maXpeedingrods
#adSuspension Kit Strut Red, 24 Level Adjustable Damper Spring Shock Absorber, maXpeedingrods Coilover Adjustable for Honda Civic 1989-2000 CRX 1989-1991 Delsol 1993-1997 for Acura Integra 1994-2001
#adIn addition, allowing you to have a more aggressive stance, we have adopted a deep groove ball bearing structure to help eliminate cornering noise and also improve steering feel and response. You can adjust it at any time to suit your needs. Spring length front: 180mm & Coilover overall length Rear: 435mm-480m.
More information #ad
Adjustable height the height is adjustable for 1-3 inches, allowing you to have a more aggressive stance. This design helps eliminate turning noise and also improves steering feel and response. Fit perfectly for honda civic 1989-1991 ed2 ed3 ed4 ed6 ed7 ec8 ee9; for honda civic 1992-1995 eg1 eg2 eg3 eg4 eg5 eg6 eg8 eg9 ej1 ej2 eh2 eh3 eh9; for honda civic 1995-2000 ek2 ek3 ek4 ej6 ej7 ej8 em1; for honda crx 1989-1991 ed8 ed9 ee8; for honda delsol 1993-1997 EG1; For Acura Integra 1994-2001 DC2 DC4 Rear Fork Type Bracket Model Only. Twin-tube structure compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustability, and they will give you a more comfortable riding experience by reducing the pressure on the joints and also minimizing friction and ensuring sufficient travel with less effort.
| Brand | maXpeedingrods #ad |
| Manufacturer | maXpeedingrods #ad |
| Part Number | [email protected] |
More information #ad
