As an Amazon Associate I earn from qualifying purchases.

1. Orion Motor Tech

#ad

Small Engine Vehicle Equipment, Car, Orion Motor Tech 10pcs Solid Valve Spring Compressor, ATV, Automotive Compression C-Clamp Tool Service Kit for Motorcycle

#ad
Orion Motor Tech #ad - Simple operation - close the coil spring compressor until touching the center rod, and insert the compressor into the coil spring. Orion motor tech’s outstanding customer service team will promptly follow up with any service request. Satisfaction guaranteed - if any component of the toolset is defective, the manufacturer will exchange the product or accept a return.

Durable steel construction - with forged steel construction for superior strength and hardness, this C-Clamp will not bend or twist under the stress of compressing valve springs. Carefully compress the spring for removal or install and only release compression when the spring is set for install. Efficient valve removal/install - everything you need to safely remove or install valve springs, including the wide C-clamp, extension screws, and pushers with 5 collet sizes for a precise fit on almost any automotive or small engine valve spring and cylinder head.

The smooth surface is finished with oxide to resist rust and corrosion. Handle with caution. Tool storage case - this toolset comes packaged in a high-impact, custom-molded case that holds each part securely for convenient organization and easy transport.
BrandOrion Motor Tech #ad
ManufacturerOrion Motor Tech #ad
Part NumberFBA-SCK000100
Model13

2. Falcon Performance

#ad

Chevy SB 283 327 350 400 Falcon Z28 Valve Springs & Steel Retainers & Locks Kit stock

#ad
Falcon Performance #ad - Single spring with damper. D. Spring o. D. Allow use of a mild street flat tappet camshafts with a MAX valve lift of. 550". 1. 260" i. 876".
BrandFalcon Performance #ad
ManufacturerPEP, Elgin Industries #ad
Part NumberVS-9001-KIT

3. EWK

#ad

EWK 7 Pcs Universal Overhead Valve Spring Compressor Valve Spring Removal Tool Set

#ad
EWK #ad - Slides along the depressor bar to easily work between valves without messing the cylinder settings. Time saver effortless access to valve springs in tight confined areas. If there is any problem or concern with our products, please contact us for assistance.

Excellent support service and quality guaranteed! EWK provides you premium quality tools with 12 months warranty. Highly versatile compatible for vw 4 & 5 & 928, toyota, chevrolet, porsche 924 & 5 cylinder, Mazda, Ford, Honda, Chrysler, BMW, Mitsubishi, Audi 4 & 6 cylinder, and many others. The adjustable pivots bracket holds the valve spring compression tool firmly and apply enough leverage to smoothly compress the spring.

Easy operation ewk overhead valve spring compressor tool kit allows you to remove and install the overhead valve spring and valve stem seals without removing the cylinder head from engine. Must have this must have universal valve spring tool is applicable for most domestic and imported cars with OHV & OHC gas or diesel engines.
BrandEWK #ad
ManufacturerEWK #ad
Height2.76 Inches
Length20.28 Inches
Weight7.72 Pounds
Width8.66 Inches
Part NumberEB0088

4. Ohoho

#ad

Ohoho 16 Pack Valve Springs Kit for all LS Engines, .625" Lift Rated 1997-2004

#ad
Ohoho #ad - Damper spring included: no install Load: 135lbs Install Height: 1. 800". Inside diameter of outer spring in: 0885 in. Spring kit for all ls cylinder heads and is rated for up to. 625" lift. Coil bind Height in: 1. 100 in. Number of springs per valve: single outside diameter of Outer Spring in: 1. 207 in. Open height: 1. 175" open load: 348 lbs Spring Rate lbs/in: 340 lbs. In. Valve spring Style: Beehive.
BrandOhoho #ad
ManufacturerOhoho #ad
Part Number600

5. Ohoho

#ad

16 Pack Valve Springs by Ohoho, Compatible with GM LS LS1-LS6 RPM Series Valve Springs 625" Lift Beehive

#ad
Ohoho #ad - Small end Description: 1. 034". Closed pressure: 130 lbs. 1. 175". Large end description:. 906" 🤝o. D. I. D. I. D. Coil bind: 1. 100" 🤝sold as: Set of 16. Large end Description: 1. 290" single beehive Spring Max Lift. 625. 1. 800" 🤝open pressure: 370 lbs. Small end description:. 650" 🤝spring Height: 1. 800". Description: valve springs 🤝o. D.
BrandOhoho #ad
ManufacturerOhoho #ad
Part NumberOH- 1211X

6. HuthBrother

#ad

HuthBrother Valve Spring Kit Compatible with all LS Engines Rated Valve Spings 1.307" OD .885" ID 130#@1.800 .625" Lift,Fits LS1, LS3, 6.016 Pack, LS6, LS2, 4.8, 5.3, LS7

#ad
HuthBrother #ad - Compatible with--valve spring kit compatible with all ls engines rated valve spings 1. 307" od. 625" lift, 6. 2, lq9, tbss, 5.3, corvette, lm7, camaro, lQ4, 6.0, 4. 8, ls3, cts-v, sierra, replace ls1, ls6, ls2, GTO, Silverado, 5.

7, gm truck. Product description-- outside diameter of outer spring in: 1. 207 in. Inside diameter of Outer Spring in: 0885 in. Product description--open height: 1. 175" open load: 348 lbs Spring Rate lbs/in: 340 lbs. In. Product feature--racing 1200 series valve springs are great as replacement parts. If you encounter any problem, feel free to let us know. Select them when you're upgrading camshafts or doing engine rebuilds.

Coil bind Height in: 1. 100 in. Install load: 135lbs, Install Height: 1. 800", part number: PAC-1219. After-sales service --pleases make sure the part number of new replacement matches your original equipment before ordering. This ensures that the springs maintain the load needed to withstand rigors of both street and mild racing applications.
BrandHuthBrother #ad
ManufacturerHuthBrother #ad
Part NumberHU-PAC-2

7. Pac Racing Springs

#ad

PAC Racing Springs PAC-1218 1.290 Valve Spring

#ad
Pac Racing Springs #ad - Part number: PAC-1218. Country of Origin : China. Package weight : 3. 08 pounds. Package dimensions: 15. 2 l x 3. 5 h x 4 w inches.
BrandPac Racing Springs #ad
ManufacturerPAC Racing Springs #ad
Height3.5 Inches
Length15.2 Inches
Width4 Inches
Part NumberPAC-1218
ModelPAC-1218

8. LSM Racing Products

#ad

LSM Racing Products PC-100SLC Valve Spring Seat Pressure Tester

#ad
LSM Racing Products #ad - Package weight : 4 pounds. Package dimensions: 12. 45 l x 3. 78 h x 7. 06 w inches. Part number: PC100SLC. Country of Origin : United States.
BrandLSM Racing Products #ad
ManufacturerLSM Racing Products #ad
Height4.3 Inches
Length12 Inches
Weight2.85 Pounds
Width9 Inches
Part NumberPC100SLC
ModelPC-100SLC

9. LSM Racing Products

#ad

LSM Racing Products SC-2000 Valve Spring Compressor

#ad
LSM Racing Products #ad - Package weight: 37. 15 pounds. Package dimensions: 19. 49 l x 8. 02 h x 11. 38 w inches. Part number: SC2000 . Oem equivalent part number: SC-2000 .
BrandLSM Racing Products #ad
ManufacturerLSM Racing Products #ad
Height3.4 Inches
Length19.9 Inches
Weight6.59 Pounds
Width12.6 Inches
Part NumberSC2000
ModelSC-2000